Cotton: cultivation, irrigation, crop rotation, and harvesting

Last updated: June 27, 2025
Upland cotton (Gossypium hirsutum)

Upland cotton (Gossypium hirsutum).

Cotton is an agricultural spinning and oilseed crop.

Economic importance

Cotton fiber is the main type of plant raw material for the textile industry. From cotton fiber of long-staple varieties various fabrics are made: calico, sateen, knitwear, flannel, batiste and others; in addition, it is used for the production of threads and cord. In a mixture with wool or chemical fibers, cotton fiber is used for the production of a wide variety of fabrics.

Seed fuzz (linter or lint) serves for the manufacture of absorbent cotton, especially strong types of paper, motion-picture and photographic film, plastics, nitrocellulose lacquers, and artificial leather.

Cotton cake can serve as a good concentrated feed for farm animals. The protein content in it reaches 40%. It is fed in small amounts (2-3 kg per day per head of cattle), since it contains the toxic substance gossypol. Cake must not be fed to pigs.

Seed hull (husk) serves as raw material for the production of ethyl and methyl alcohols, glucose, furfural, lignin, resins, and feed proteins. From stems and boll valves, acetic acid, paper, and biofuel are obtained. From leaves and stem bark — citric acid (content in leaves up to 10%) and malic acid, and resins. Plant residues can be used as organic fertilizer.

Cotton raw material is used for the production of shatterproof glass, artificial felt, fire hoses and other products.

From 1 ton of raw cotton the following can be obtained: (320) 340-350 kg fiber, 570-580 kg lintered seeds, 30-40 kg linter, 20-30 kg other wastes. Processing this amount of cotton seeds can yield: 98-110 kg refined oil, 20 kg laundry soap, 225-230 kg cake, 210-230 kg husk.

The output from 1 kg of cotton fiber in fabrics is: 12 m calico or 20 m batiste, or 140 spools of thread.

Cotton is a valuable honey plant.

As a row crop of crop rotation, it has important agronomic significance.

Besides being a spinning crop, cotton is also considered one of the main oilseed crops. In cotton seeds, whose share of the total raw cotton harvest mass reaches 65%, there is (18) 20-27% oil, including 35-40% in the kernel. The oil is suitable for food and for obtaining margarine, drying oil, phytin, stearin, glycerin, and soap.

History

Cotton has been cultivated since ancient times. It was grown 3000 years BC in India and China and used to obtain spinning fiber. Approximately 500 years BC cotton penetrated from China to Egypt, and in the IV-V centuries cotton growing began to develop in Central Asia and Iran; in the IX-X centuries high-quality fabrics were made from cotton fiber.

In the XIII century cotton appeared in Transcaucasia.

In America, in Mexican and Peruvian cultures, cotton appeared independently and has been known for several millennia.

Industrial processing of cotton fiber increased sharply in the second half of the XVIII century, after the invention of machine spinning and the cotton gin. In the XIX century cotton growing provided 73% of all spinning raw material, and in the XX century — over 85%.

Cotton growing in Russia developed very quickly. In 1922 V. I. Lenin approved the “Regulation on the State Organization of Cotton Growing, the Cotton Cleaning Industry and Cotton Procurement”. In 1929 measures were taken to free the USSR from dependence on foreign supplies of cotton raw material. Special attention was paid to the development of cotton growing in the republics of Central Asia and Transcaucasia. As a result, within 3 years cotton imports to the USSR greatly decreased and amounted to only 7% of the country's need for cotton fiber, and in the prewar years they were completely stopped.

The USSR was the northernmost country in the world where cotton was grown. After the Great Patriotic War the USSR occupied first place in world agriculture in yield and quality of cotton fiber.

AliExpress WW

Chemical composition

Chemical composition of green mass mown in the phase of mass flowering:

  • water — 65-70%;
  • carbohydrates — 17%;
  • protein — 2.5%;
  • fats — 0.8%.

The green mass also contains a large amount of calcium and phosphorus.

Cultivation areas and yield

The world area occupied by cotton crops in 1984 was 33-34 million ha, and the gross harvest of raw cotton — 42-45 million t. The main cotton-growing countries of the world were — the USSR, USA, China, India, Pakistan, Brazil, Mexico, Egypt and Turkey. Their share accounted for approximately 80% of all raw cotton produced in the world.

In the early 2000s cotton was grown in approximately 60 countries. The total sowing area was 35 million ha, including:

  • India — 7.5 million ha;
  • USA — 4.5 million ha;
  • China — 4.8 million ha;
  • Brazil — 1.9 million ha;
  • Pakistan — 1.8 million ha;
  • Egypt — 0.6 million ha.

In the USSR the main cotton-growing areas were the republics of Central Asia: Uzbekistan, Turkmenistan, Tajikistan, Kyrgyzstan, Kazakhstan and Transcaucasia (Azerbaijan). The sowing area in the USSR reached 3.2-3.3 million ha, and the raw cotton yield in 1984 was 2.3-2.6 t/ha, gross harvest — 8.6 million t.

Record yields reached 4-5 t/ha.

For the period up to 2000 in the USSR it was planned to achieve collection of 2.8-3 million t cotton fiber and 9.1-9.4 million t raw cotton. In addition, improvement of fiber quality, its output and reduction of losses were planned.

Cotton species

The genus Cotton (Gossypium) includes 35 species, of which 5 are cultivated and 30 wild; besides, the genus has many forms and varieties. In the USSR two species were cultivated:

  • upland cotton, or Mexican (medium-fiber), — Gossypium hirsutum L.;
  • Peruvian cotton, or Egyptian (fine-fiber), — Gossypium peruvianum Gav. (Gossypium barbadense L.).

Herbaceous cotton (guza) — Gossypium herbaceum L. — is considered low-productive and was not grown in the USSR.

Tree cotton, or Indo-Chinese — Gossypium arboreum L. and three-pointed cotton — Gossypium tricuspidatum Lam. — are cultivated in tropical regions.

Upland cotton (medium-fiber)

Upland cotton (medium-fiber) originates from Mexico.

In cultivation this subshrub reaches a height of 1-1.5 m. The stem is strong with developed branches, which are pubescent with one tier of hairs.

Leaves are 3-5-lobed. The lobes are medium, shortened-triangular.

Flowers are yellow, medium-sized, the spot on the corolla petals is absent, and they open well.

The boll is round, large, with a beak at the top, 4-5-valved (3-5-locular), the surface is smooth, when ripe it opens widely, with 5-11 seeds in each locule.

Seeds are covered with fuzz consisting of dense short hairs. The fiber is white, 30-35 mm long, 17-20 µm thick. Fiber yield is 35-38 (40)%. Fiber quality is high. Metric number 4200-5500.

Upland cotton is the most widespread species in all cotton-growing countries. Most cultivated varieties belong to this species and are distinguished by early ripeness and cold resistance.

Peruvian cotton (fine-fiber)

Peruvian cotton (fine-fiber) originates from Peru.

It is a subshrub 1 to 3 m tall with a large number of long non-pubescent branches.

Leaves are 3-5-lobed, the lobes are elongated-triangular.

Flowers are large, cream-colored, and have a crimson-red spot on the corolla petals.

The boll is conical, large (but smaller than in medium-fiber cotton), with an elongated top, the surface is finely pitted, when ripe it opens widely, 3-4-valved, with 5-8 seeds per locule.

Seeds are almost bare, fuzz is almost absent. Fiber yield is 31-34%. The fiber is strong, long 39-41 mm, of the highest quality, 12-18 µm thick, metric number 6000-7500, silky, and has high spinning qualities.

Fine-fiber cotton is characterized by a longer growing season and high heat requirements, therefore its varieties are grown in the warmest countries and regions.

Botanical description

Cotton (Gossypium) belongs to the family Malvaceae (Malvaceae). It is a perennial plant, but more often, especially in regions with a temperate climate, it is cultivated as an annual crop.

An adult plant is a bush 90 to 130-180 cm tall.

Root

The root is taproot, well developed, and penetrates the soil to a depth of up to 1.5-2 (3) m. In the upper part many lateral roots depart from it. It spreads horizontally by 1.5-2 m.

In the first month of plant development the root system grows very quickly. Until the budding phase the main root develops especially intensively, whereas after this phase — the lateral roots. In the first two weeks the growth of the main root averages 2.5-3.2 cm per day, and the total growth of lateral roots reaches 30-45 cm.

Stem

The stem is straight, branching, sufficiently strong, lignified (coarse) in the lower part, and covered with hairs.

In the leaf axils 2-3 buds are laid. Those in the axils of the first leaves usually remain dormant, and from the buds of the axils of subsequent leaves, more often the 3rd-5th leaf, branches begin to form.

Branches

Cotton bush

Cotton bush:

1 — main stem; 2 — boll; 3 — fruiting branches; 4 — vegetative branches.

Branches are divided into vegetative (monopodial), or monopodia, and fruiting (sympodial), or sympodia.

Monopodia are formed in the lower part of the stem and depart from it at an acute angle. Monopodia grow in a straight line and as a rule are stronger than sympodial ones.

Fruiting branches on the stem are located above the vegetative branches. They form a more obtuse angle with the stem and grow geniculately, along a broken line. Sympodia are peduncles on which fruits (bolls) then appear.

The number of monopodial branches on the main stem before the formation of the first sympodium varies and depends on the forms and varieties of cotton species, as well as on growing conditions.

In the tropics there are forms of cotton in which the number of monopodial branches is from 15 to 40. Such a type of cotton branching is called monopodial.

A typical cotton plant is tree-like. Sympodial branches are formed high on it and bloom very late.

In the conditions of Central Asian countries, on a cotton bush before the formation of the first sympodium there are usually only 2-3 monopodia. Such a type of branching is called sympodial. The height of laying the first sympodial (fruiting) branch on the main stem is one of the signs of early ripeness of cotton.

There are forms of cotton in which branches are not formed, and fruits sit on shortened pedicels, 1-2 in the leaf axils of the main stem. Such a type of branching is called zero. Bushes of this type are very compact. Such forms of cotton were bred in the Soviet period and used to obtain fine-fiber cotton.

Cotton varieties differ in the number and length of internodes of fruiting branches. Some varieties have fruiting branches with one internode, at the end of which all buds produce buds and bolls, therefore further growth of the branch stops. Such a type of branches is called determinate. A cotton bush with a determinate type of branching has a compressed columnar shape.

Fruiting branches with several internodes belong to the indeterminate type.

Depending on the length of the internodes, indeterminate sympodial branches are divided into subtypes:

  • I — with shortened internodes 3-5 cm;
  • II — with medium internodes 6-10 cm;
  • III — with long internodes 11-15 cm;
  • IV — with very long internodes 16-25 cm.

The subtype with very long internodes is characteristic of Soviet varieties of fine-fiber cotton.

The length of the internodes of fruiting branches is an important varietal character which determines the total length of the branches, the degree of spreading or compactness of the bush. The longer the internodes, the longer the branches and the more spreading the bush; conversely, the shorter the internodes, the shorter the branches and the more compact the bush. Greater spreading of the bush creates some difficulties during inter-row soil cultivation and harvesting.

In the USSR forms of cotton with an indeterminate type of fruiting branches were usually grown. Cotton with a determinate type of branches is considered less productive and gives fiber of somewhat worse quality.

In the leaf axils of monopodial branches, branches of the second order may form, moreover just as on the main stem: in the axils of the first 2-3 leaves branches usually are not laid, and the buds here remain dormant. From the axils of the subsequent 2-3 leaves monopodia may form, and from the axils of the following leaves — only sympodia. Thus, in its development the monopodial branch repeats the development of the main stem.

The more late-ripening the cotton, the more often it forms monopodial branches of the second order. In early-ripening varieties, on monopodial branches usually only sympodia form as second-order branches. The total number of fruiting branches on the stem is 16-18.

Leaves

Leaves differ in size and shape on the same plant. The first 2-3 leaves developing on the main stem are entire, cordate. The remaining leaves on this stem and branches are lobed. The number of leaf lobes differs in different varieties and varies from 3 to 7.

On the main stem and on vegetative branches, leaves are located at each node, whereas on fruiting branches — opposite each bud.

Inflorescence

The flower is large, consists of five petals fused at the base, yellow, cream or white depending on the variety. At the base of the petals of some cotton species, for example, Peruvian or guza, there is a crimson-red spot.

The stigma is 3-5-lobed, large. Stamens are many. Anthers are yellow, cream or orange. The calyx is green, poorly developed.

The flower has three large bracts.

Mainly a self-pollinator. Cross pollination is rarely observed.

Fruit

The fruit is a round-ovate boll. The size of the boll depends on the number of valves (locules), which may be 3-5. In one locule there may be from 5 to 10 seeds, in one boll — 25-40 seeds.

When ripe the boll cracks along the seams, and the valves in most species open, exposing raw cotton, which consists of seeds covered with long (fiber) and short (fuzz) hairs.

The mass of dry raw cotton in one mature boll is from (2) 5 to 8 (10) g and depends on the variety and growing conditions. The share of raw cotton mass accounts for 30-40%, fuzz (linter) — 0.2-1.5%. Strong well-developed bushes can produce more than 100 opened bolls. Opening stops at frosts of -3…-4 °C, which in the main cotton-growing areas usually occur at the end of October.

Seeds

Seeds are ovate, with a very large number of fibers — up to 7-15 thousand, 9-12 mm long, 6-8 mm wide. After removal of fiber from the seeds, fuzz of short hairs remains on them. It accounts for 3-4% of seed mass.

Seeds are covered with two coats: outer (hull) — lignified dark brown, and inner — filmy. The kernel (without coat) consists of two cotyledons, rudiments of root and stem.

Mass of 1000 seeds (80) 90-150 (160) g.

Cotton fiber

Cotton fiber is an elongated cell of the epidermis of the hull, weakly twisted, bending and covered with the thinnest layer of wax, which gives the fiber luster. The ratio of cell thickness to its length is 1 : 1500-2000. Inside the fiber there is a cavity. Usually the fiber is white; in some varieties it may be cream, greenish or brown.

The fuzz hairs of seeds are also formed from cells of the outer epidermis of the hull, but their length is substantially less.

After the boll cracks, the fibers quickly dry, as if flatten, acquiring the shape of a ribbon. Simultaneously they twist and become spirally twisted. Sometimes overripe fibers with thick walls occur. When drying, such fibers do not twist and remain round in cross section. In immature or unripe fibers, when drying the walls easily flatten, however their crimp is weak; under the microscope they look like flat ribbons. Such abnormally developed fibers in the textile industry are called “dead fibers”.

In a well-developed boll there may be present not only abnormally developed fibers, but also whole seed locks, that is seeds with fibers sitting on them, which are formed due to non-fertilization of some ovules of the ovary. The fiber of locks begins to form on the day of flowering, before fertilization. But the development of unfertilized ovules and the fibers that began to develop on them quickly stops, and they die. Dead ovules when drying are nodules with short fibers; they are called small uluk.

Besides small uluk, when fertilized ovules die in the phase of a more or less developed embryo, large uluk may form, that is an underdeveloped lock.

The formation of small and large uluk occurs primarily due to improper nutrition of the plant and its individual parts. Most often this is related to a low level of agrotechnics and cotton diseases, especially wilt.

Increased uluk content of raw cotton is usually noted in the first cone and peripheral cones, starting from the 4th-5th. Within one boll, uluk is observed at its base and in the lower parts of the segments.

The formation of uluk leads to a decrease in raw cotton yield and loss of fiber quality. In different cotton varieties the mass of uluk varies from 0.7 to 1.2%.

The quality of cotton fiber is characterized by various technological characteristics, the main of which are the following:

  • fiber yield;
  • fiber length;
  • average breaking load (fiber strength);
  • linear density (metric number);
  • breaking length;
  • fiber maturity.

Technological characteristics

Technological characteristics (properties) of fiber determine the quality of fabrics made from it. The thinner, stronger and longer the fiber, the more valuable it is considered, and the higher the quality of fabrics produced from it.

Fiber yield is the ratio of fiber mass to the mass of raw cotton from which it was obtained, expressed in percent. Fiber yield depends on growing conditions and the location of bolls in different tiers of the cotton bush. Fiber yield from bolls of the lower tiers is 2-4% greater than from the upper tiers.

Fiber length is the distance between the ends of the fiber in a straightened state. It is expressed in millimeters.

Average breaking load (strength) of fiber is the greatest force which a sample withstands before rupture. It is expressed in newtons (N) or gram-force (gf). It characterizes the magnitude of the load which one fiber can withstand before rupture. The average breaking load of fiber depends on the variety and usually is 0.004-0.006 N or, respectively, 4-6 gf.

Linear density (metric number) of fiber indirectly characterizes the fineness of cotton fiber. It corresponds to the total length of all fibers in 1 g of fiber. It is expressed in meters. Thus, for variety 108-f the metric number is 5550, which means: the length of all fibers in 1 g of fiber is 5550 m. The greater the linear density of the fiber, the thinner it is. The metric number of fiber of different varieties varies from 5000 to 8000.

Breaking length of fiber is a complex indicator equal to the product of fiber strength and its metric number. For example, at fiber strength 0.0049 N (4.9 gf) with a metric number of 5200 m, its breaking length will be 25,480 m (5200 m x 4.9 gf), or 25.48 km. Breaking length is expressed in kilometers. Physically the characteristic represents the length of such an imaginary fiber which breaks under the action of its own mass. The greater this characteristic, the stronger the fibers, and correspondingly, the yarn.

Fiber maturity reflects the filling of fibers with cellulose. The characteristic is determined by the thickening of the walls and the reduction of the channel. An increase in maturity leads to a change in the basic properties of the fiber: its strength, linear density (thickness) and degree of dyeability increase.

Technological properties of cotton fiber differ on the same bush. Thus, fiber yield decreases from the first bolls to subsequent ones. In the boll itself, in each segment, the middle locks have longer and stronger fiber. Fibers also differ within a lock. The longest fibers are located at the chalaza of the seed, whereas short ones — at the micropylar end. The degree of fiber maturity decreases from the micropyle to the chalaza.

For industrial use, more uniform fiber in technological characteristics is important.

Technological properties of the fiber depend on the hereditary characteristics of varieties, soil-climatic conditions and cultivation practices. The most variable is fiber length, which changes, for example, from irrigations and fertilizer.

Cotton fiber types

The Central Research Institute of the Cotton Industry proposed conditionally dividing the entire assortment of cotton fiber into seven types, for each of which an approximate need of the cotton industry (USSR) was established.

Fiber of types I, II and III is obtained from varieties of fine-fiber cotton. These varieties are late-ripening and cultivated only in the southern regions of Central Asian countries on relatively small areas (10% of all cotton sowings). From the fiber of these varieties especially thin and strong fabrics are obtained — sateen, batiste and high-quality knitwear.

Fiber of types IV, V, VI and VII is produced from varieties of medium-fiber cotton. These varieties are distinguished by greater early ripeness and yield. They account for about 90% of all cotton sowing areas. Fiber of type IV is similar in quality to type III. It is used for the production of threads, marquisette and other fabrics. Fiber of type V (main) is used for the production of the most widespread fabrics — underwear, dress, lining and others. From fiber of type VI suit and brushed fabrics are made; they are also mixed with wool. Type VII fiber is not planned, as its quality does not satisfy requirements.

Table. Cotton fiber types.

Fiber typeFiber length, mm, not less thanMinimum metric numberStrength, gf, not less thanRelative breaking load, gf/tex
I40-4179004,737,0
II38-3973004,734,0
III37-3868004,732,0
IV35-3660004,728,0
V33-3456004,726,5
VI32-3350005,025,0

Biological features

Temperature requirements

Cotton seeds begin to germinate at a temperature of 10-12 °C, but 20-25 °C is considered optimal. Even slight frosts down to -0.5…-1 °C lead to the death of seedlings. The minimum temperature necessary for the appearance of cotton seedlings is 14-15 °C, for the formation of generative organs and flowering — 20 °C.

The optimal temperature for plant development is 25 °C. A higher heat requirement of plants, up to 26-30 °C, occurs during flowering and budding.

A decrease in temperature below 10-12 °C leads to obtaining short or unripe cotton fiber.

The sum of active temperatures for early-ripening cotton varieties is 3000 °C, for mid-ripening — 3400 °C, for late-ripening — 4000 °C.

Moisture requirements

Cotton is considered a comparatively drought-resistant plant.

Thanks to its deeply penetrating root system, the plants make good use of water from subsoil layers.

Cotton can be grown in areas with an annual precipitation sum of 350-400 mm, however under these conditions the yield is very low.

Transpiration coefficient (400) 500-600 (800).

The greatest need for moisture occurs during the period of flowering — fruit formation.

Higher air humidity promotes obtaining long and thin fiber.

It responds very well to irrigation, and the yield increases sharply. In the conditions of the USSR cotton was cultivated only under irrigation. To obtain good yields, cotton sowings must be provided with 5-8 thousand m3/ha of water.

Soil requirements

In the countries of Central Asia and Transcaucasia, cotton is cultivated on soils characteristic of these regions: sierozems, sierozem-meadow and meadow-bog soils. Light fertile soils with pH 7-8 are considered optimal.

Fields with a close occurrence of groundwater and with increased soil acidity are poorly suitable.

Cotton is able to tolerate slight salinity, especially toward the end of the growing season.

Light requirements

Cotton is a light-loving short-day plant, therefore the orientation of leaf blades changes during the day: during the day the blades face the sun, at night and in the shade they droop.

Diffused light leads to a delay in plant development and an increase in vegetative mass.

Direct and too bright light simultaneously with the action of high temperature and dry air often reduces assimilation.

Vegetation

In cotton the following phases of vegetation are distinguished:

  • emergence;
  • budding;
  • flowering;
  • ripening.

Seed germination begins upon absorption of 70-80% of their mass. First the root begins to grow, then — the curved hypocotyl of the stem, bringing the cotyledons to the soil surface.

Cotyledons appear on the soil surface under favorable conditions 5-6 days after sowing, and 8-10 days after this the first true leaf forms. Each subsequent leaf appears after 3-5 days.

With the formation of 7-8 true leaves, in the axil of the 4th-5th (6th) leaf or slightly higher, the first fruiting branch with a bud forms. This moment is considered the beginning of the budding phase. From the moment the first leaf appears to the beginning of budding, (20) 25-30 days pass.

Bud formation on the bush occurs in two directions: along the fruiting branch (horizontally) and in a spiral upward.

Flowering proceeds in accordance with the dates of bud formation. The period from the development of the first bud to the opening of the first flower is 25-35 days; by this moment 9-10 fruiting branches have formed.

It has been established that higher raw cotton yields can be obtained with early flowering and fruit formation.

Flowers open in the morning hours. The corolla petals at this time are light yellow. In the second half of the day the corolla reddens, and by evening, wilting, it closes. The next day the corolla acquires a violet color and falls off.

Cotton flowering pattern

Cotton flowering pattern:

Roman numerals indicate the numbering of flowering cones, Arabic numerals the numbering of branches.

The opening of flowers on the bush occurs from bottom to top, in groups or cones. The first cone includes the first three flowers, which are located on the three lower branches closer to the stem. The second cone consists of the second flowers of the first three branches and the first flowers on the 4th, 5th and 6th branches. The third cone consists of flowers of the 1st, 2nd and 3rd branches, the second flowers of the 4th, 5th and 6th branches and the first flowers of the 7th, 8th and 9th branches, etc.

Flowering along an ascending line, that is from branch to branch, occurs with intervals of approximately 2-3 days (short queue), whereas along one and the same branch — with intervals of 5-7 days (long queue). The duration of short and long flowering queues depends on the varietal characteristics of cotton, growing temperature, agrotechnics, etc.

The period from the flowering phase to the opening of bolls is (45) 50-65 days. External formation of the boll ends 25-35 days after fertilization, but for seed ripening and fiber formation another 25-30 days are necessary, during which reutilization of nutrients from the vegetative organs of the plant occurs.

The opening of bolls on one bush often stretches up to 2 months. Clear and warm weather leads to acceleration of this phase and, conversely, cool weather — to slowing down.

The entire period from sowing to the moment of opening of the first boll, that is the beginning of the ripening phase, is:

  • for Soviet varieties of medium-fiber cotton — 130-140 days;
  • for Soviet varieties of fine-fiber cotton — 145-160 days.

The duration of interphase periods for the most widespread group of mid-ripening varieties is (Vavilov):

  • from sowing to emergence 14-16 days;
  • from emergence to the beginning of head formation 37-43 days;
  • from the beginning of head formation to flowering 27-30 days (according to other data, 50-60 days after emergence, Kolomeichenko);
  • from flowering to ripening 44-50 days.

The total duration of vegetation for this group of sunflower varieties is 120-140 days. Depending on the variety or hybrid and growing conditions, ripening of achenes may occur after (70) 80-120 (140) days after emergence.

In the first period of their development (2-3 pairs of leaves), sunflower plants develop relatively slowly. At this time they are easily suppressed by weeds. However, then growth accelerates and reaches its maximum, which is 3-5 cm per day, in the period from head formation to the beginning of flowering. In the flowering phase, growth in height slows down and by the end of flowering completely stops.

The beginning of head formation in early-ripening sunflower varieties under the conditions of the South-East of Russia occurs at 2 pairs of leaves, in mid-ripening — at 3-5 pairs. Head initiation in mid-ripening varieties begins under the conditions of Krasnodar Krai at 5 pairs of leaves.

Flowering of one head lasts 8-10 days, and growth — until the moment of its yellowing. The head grows most intensively during 8-10 days after the end of flowering. Filling of achenes lasts 32-42 days from the time of their fertilization.

Simultaneously with the growth of the plant in height and the formation of the head, dry substances begin to accumulate. In this period this process proceeds slowly, and by the beginning of head formation sunflower accumulates only 15% of dry substances. By the beginning of the flowering phase the amount of dry matter in the plant reaches 50%, and it continues to increase until the beginning of achene filling, but is also consumed mainly for the formation of the head.

Physiological ripening of achenes after harvesting may be 10-50 days.

Crop rotation

In cotton-growing regions, cotton-alfalfa rotations are widespread. The main ones are considered 8-, 9- and 10-field rotations, in which 2-3 fields are occupied by alfalfa and 5-7 fields — by cotton. Cotton accounts for 60-70% in cotton-alfalfa rotations.

For cotton-alfalfa rotations the designation by numbers is accepted, for example, 2:5, 2:6, 3:7, etc., in which the first number means the number of alfalfa fields, the second — cotton.

Depending on soil conditions the following rotation schemes are recommended:

  • non-saline dark typical sierozems and meadow soils — 3:9, 3:7, 2:8;
  • non-saline and slightly saline light sierozems and meadow soils — 3:7, 3:6, 2:7;
  • medium-saline sierozems and meadow soils — 3:6;
  • lands subject to strong salinization — 3:5:1, 3:6:1, where 1 denotes a reclamation field.

In the first field of cotton-alfalfa rotations, alfalfa is usually sown under the cover of cereal crops (barley) or together with maize, dzhugara or Sudan grass for silage. In the second and third years alfalfa grows as a sole crop; after its plowing up, cotton is sown, which occupies the field for 6-7 years in a row.

In schemes 3:5:1 and 3:6:1 the last field, designated 1, is reclamation. On it, before sowing alfalfa, leveling, leaching, etc. are performed.

Alfalfa is important as a predecessor of cotton on soils subject to salinization. Thanks to its well-developed aboveground mass, it shades the soil surface, significantly reducing moisture evaporation and thereby preventing the movement of salts from the lower soil layers to the upper ones. During irrigations salts are washed out in large quantities into deeper horizons.

Alfalfa is also of great importance on fields infected with wilt. The causative agents of the disease do not develop on alfalfa roots and for the most part die, not finding the substrate they need. According to data from experimental institutions, when using cotton varieties with low resistance to wilt, their infection in the first 3 years after alfalfa plowing up is not more than 20-35%, whereas when sown after old arable land the same cotton varieties are infected by wilt by more than 90% already in the first year.

Alfalfa improves the physical properties of the soil, reduces subsequent water consumption for irrigation and activates the activity of soil microflora. Alfalfa of the third year of use leaves up to 15-18 t/ha of organic matter.

Other rotations may also be used, which are developed taking into account the intensification of cotton growing and more efficient use of irrigated lands. Besides alfalfa, good predecessors of cotton may be sorghum, maize, leguminous crops (mung bean, pea, soybean, sweet clover).

Of great importance for increasing soil fertility and yield are sowings of green manure crops, for example, rapeseed, mustard, vetch, pea, etc. Sowing of green manures is carried out after harvesting maize or under cotton in the 4th-6th year after alfalfa plowing up.

The use of cotton monoculture, which is practiced in some countries, is not recommended, as it is associated with a large annual removal of nutrients from the soil and unfavorable mechanical effects associated with repeated irrigations and inter-row cultivations. With continuous cotton sowings, fertility decreases, the arable layer disperses, the concentration of harmful salts increases and the groundwater level rises, the structure and phytosanitary condition of soils worsen.

Cotton is allowed to be grown in one place of the rotation for 4-7 years in a row only in the case of systematic application of fertilizers and systematic control of weeds, pests and diseases.

Cotton rotations

Cotton occupies large areas in regions where irrigated agriculture is used, in Central Asian and Transcaucasian countries. To increase the share of cotton in special rotations, repeated sowings are introduced for 3-4 or more years in a row.

In Central Asian countries nine- and ten-field cotton-alfalfa rotations are used. On cultivated highly fertile soils the following alternation schemes have been introduced:

  • 1-2 — alfalfa, 4-10 — cotton;
  • 1-2 — alfalfa, 3-6 — cotton, 7 — maize for grain, 8-10 — cotton;
  • 1 — alfalfa, 2-4 — cotton, 5 — maize for grain, 6-10 — cotton.

In these rotations cotton accounts for 70, 75 and 80% of the area.

On poorly cultivated but comparatively fertile, for example, slightly and medium saline, soils the following cotton rotations are recommended:

  • 1-2 — alfalfa, 3-6 — cotton, 7 — maize for grain, 8-10 — cotton;
  • 1-2 — alfalfa, 3-6 — cotton, maize for grain with postharvest sowing of rapeseed or green manures, 8-10 — cotton;
  • 1-3 — alfalfa, 4-7 — cotton, 8 — maize for grain, 9-10 — cotton. In these rotations cotton occupies respectively 75%, 70 and 66.7%.

To increase the efficiency of cotton-alfalfa rotations, alfalfa sowings are combined with Sudan grass or maize, autumn and winter intermediate crops are introduced, harvested in spring for green fodder or plowed in before sowing cotton. The best intermediate crops are — winter vetch, winter barley or rye, wintering pea, shabdar, mustard, rapeseed, etc.

Intermediate crops are, as a rule, used in the 3rd-5th year of cotton cultivation, after alfalfa plowing in.

It is worth noting that in the countries of Central Asia, when growing cotton in a rotation, for the production of 100 kg of raw cotton 24% less labor is spent than with continuous cultivation, fertilizers — 34% less, irrigation water — 20% less.

Fertilizer system

Cotton belongs to crops that consume a large amount of nutrients. For the formation of 100 kg of raw cotton with good plant development, cotton consumes 5 kg of nitrogen, 1.7 kg of phosphorus and 5 kg of potassium.

Providing cotton plants with an optimal nutrition regime makes it possible to shorten the growing season by 5-10 days, increase yield and plant resistance to diseases. A lack of nutrients in the initial phases leads to slower development of the root system and shedding of buds and ovaries. A lack of nutrition in later phases of vegetation reduces the rate of formation of fruiting branches and buds and delays flowering.

The absorption of nutrients during vegetation is uneven:

  • before the beginning of budding, 3-5% of nitrogen and phosphorus of the total amount of these substances needed during the entire vegetation, and 2-3% of potassium, are consumed;
  • from the beginning of budding to flowering — 25-30% of nitrogen and phosphorus, up to 15-20% of potassium;
  • during flowering and fruit formation, which coincide with the most intensive plant growth, — 65-70% of nitrogen and phosphorus, 75-80% of potassium.

In the first phases of development, plants are most sensitive to phosphorus deficiency.

Intensive cultivation technologies presuppose providing cotton with an optimal nutrient regime during vegetation and increasing the efficiency of applying mineral fertilizers.

The Fertilizer system includes the application of organic and mineral fertilizers. However, it should be taken into account that cotton, which is placed in a rotation after alfalfa plowing in, makes good use of the nutrients accumulated by alfalfa and has a lower need for organic fertilizers than cotton grown on fields more distant in time from alfalfa. As a rule, for 2-3 years after alfalfa, organic fertilizers are not applied under cotton, but mineral fertilizers are applied.

The use of green fertilizers is important. After harvesting maize, intermediate crops may be sown, for example, pea, whose green mass is plowed in in autumn.

Norms and methods of applying mineral fertilizers depend on soil type, fertilizer form and placement of cotton in the rotation. In cotton-alfalfa rotations on sierozem soils in the first two years after alfalfa plowing in, nitrogen fertilizers, as a rule, are applied in smaller amounts than phosphorus fertilizers. The ratio of nitrogen and phosphorus in the annual norm of mineral fertilizers is 1 : 1.3 or 1 : 1.5. In subsequent years, under cotton on the same fields, the norms of applying nitrogen fertilizers are increased, and the ratio between nitrogen and phosphorus is set at 1 : 0.8. Such a ratio reduces the incidence of cotton wilt. Besides, it is favorable for cotton when nitrogen doses are increased to 240-300 kg/ha.

On meadow and meadow-bog soils with a high nitrogen content, the N : P ratio is advisable to set at 1 : 1.5.

The norms of mineral fertilizer application recommended by SoyuzNIKHI for cotton on sierozems with a planned raw cotton yield of 3.5-4.0 t/ha are N270-300P190-210K120 kg/ha. In the third year after alfalfa plowing in, on cotton fields under autumn plowing it is recommended to apply not less than 10-15 t/ha of manure.

With industrial cultivation technology, fractional application of fertilizers is recommended:

  • under deep plowing;
  • before sowing;
  • at sowing;
  • during vegetation.

When distributing fertilizers by application dates, it is necessary to take into account the entry of nutrients into plants during vegetation. 25% of the total norm of nitrogen fertilizers should be applied before sowing and 75% — at sowing and in top dressing. With two top dressings, nitrogen is applied in the phases of the beginning of budding and the beginning of flowering; with three — additionally in the phase of 3-4 true leaves.

At the first (early) top dressing, fertilizers are applied at a distance of 15-16 cm from the row to a depth of 12-14 cm. At top dressing in the budding phase — at a distance of 20-22 cm from the row to a depth of 3-4 cm below the bottom of the furrow. The third top dressing is applied in the middle of the inter-row spaces.

For applying fertilizers, cultivators-plant feeders KRKh-4 are used with 60 cm inter-row spacings or cultivators-plant feeders KRKh-3.6 with 90 cm inter-row spacings.

When using increased nitrogen norms, approximately 1/3 of them is applied before sowing, the rest — in top dressings during budding and the beginning of flowering.

Nitrogen deficiency leads to poor plant development and greater susceptibility to wilt.

Phosphorus is recommended to be applied under plowing at the rate of 60-70% of the annual norm, the rest — simultaneously with sowing and in top dressings.

A good effect is given by row application at sowing of granular superphosphate in an amount of 15-20 kg/ha P2O5. In top dressing, phosphorus fertilizers are applied together with nitrogen fertilizers in the budding phase of cotton.

Potassium fertilizers are more effective on light and non-saline soils with a high groundwater level. The recommended norm is 80-100 kg/ha K2O. Usually potassium fertilizers are applied in equal shares under plowing and in top dressing, which is also carried out at the beginning of budding.

It should be taken into account that intensive use of nitrogen and phosphorus fertilizers increases cotton's need for potassium nutrition. Potassium deficiency leads to disruption of carbohydrate metabolism in plants, the conditions for boll formation, especially of the outer flowering cones, greatly worsen, the main stem becomes thinner and prone to lodging. Besides, the technological properties of the fiber significantly decrease: metric number, strength and maturity.

According to experimental data of SoyuzNIKHI, the most optimal ratio of nitrogen and potassium is 1 : 0.5. When applying increased nitrogen norms and on plots infected with wilt, the ratio shifts to 1 : 0.7 and even to 1 : 1.

Potassium fertilizers are a necessary component of fertilizer mixtures for all soil types, except saline ones, in which the potassium content is sufficiently high, and with a planned raw cotton yield of more than 2.5 t/ha.

Sulfur, calcium and magnesium are important in the development of cotton.

Sulfur deficiency, especially on alkaline soils, leads to retarded plant growth, and the leaves acquire a yellow color. A good result is given by applying ammonium sulfate in the initial period of plant development.

In the soils of the main cotton-growing regions of Central Asian countries, as a rule, a sufficient amount of calcium and magnesium is contained. For these regions, the application of micronutrient fertilizers is effective: boron, manganese, copper, zinc, molybdenum or, accordingly, macrofertilizers enriched with these microelements. Micronutrient fertilizers are applied directly to the soil or used for soaking seeds. In the latter case, the concentration of salts of microelements in the solution for soaking should be 0.02-0.04%, and the ratio of seeds and solution — 2:1, soaking duration — 12 h. Micronutrient fertilizers are applied to the soil before sowing or in the first top dressing in a mixture with the main fertilizers.

For sierozems it is recommended to apply 0.5-1 kg/ha of a.i. boron, for meadow-bog soils — 1.5-2 kg/ha.

Recommended norms of manganese — not more than 18 kg/ha, copper — 2-3 kg/ha, zinc — 3-4 kg/ha. Molybdenum is applied as part of molybdenized superphosphate.

Soil tillage system

Autumn tillage for cotton depends on the predecessor.

When placing cotton after alfalfa, plowing is carried out in the second half of October with plows with skimmers to a depth of not less than 28-30 cm. Before plowing, disking is performed to a depth of 5-6 cm to cut alfalfa roots and prevent their regrowth in spring.

On fields infested with Bermuda grass (Cynodon dactylon), Johnson grass (Sorghum halepense), purple nutsedge (Cyperus rotundus) and other rhizomatous weeds, after harvesting guza-paya, the soil is loosened to a depth of 16-18 cm with plows with removed moldboards, combing out weed rhizomes with mounted harrows, or with chisels. The combed-out rhizomes are removed from the field. Before loosening, heavily dried soils are irrigated with a water consumption of 600-800 m3/ha.

When placing cotton after cotton, the field is first freed from stems (guza-paya) and the irrigation furrows are leveled. Uprooting should be completed not later than the first decade of November. The uprooted stems are removed from the field. Especially thorough cleaning of guza-paya should be carried out on fields infected with wilt. On fields not infected with wilt, cotton stems can be chopped and plowed in.

When placing cotton after cereal crops, after their harvesting, shallow stubble disking is carried out to a depth of up to 5-8 cm; for better germination of weeds, it is recommended to carry out pre-plowing irrigation. After the appearance of weeds, surface tillage is carried out. The optimal time for autumn plowing is considered August-September.

With postharvest sowings of annual crops, after their harvesting irrigation is done, after which deep plowing with plows with skimmers is performed.

Two-tier plowing to a depth of 30-40 cm on fertile soils and combined plowing with subsoiling, in which the 20-25-centimeter soil layer is treated with turnover of the slice, and the lower one is loosened (on saline lands with a compacted subarable horizon), have proven themselves well. In this case, when placing cotton after alfalfa, before plowing, disking is also carried out. For two-tier and combined treatments, the plow PD-4-35 is used.

Early spring and pre-sowing soil treatments differ depending on the condition of the arable land on each plot. As a rule, soil treatment in spring begins with harrowing of autumn plowing in two passes in one tractor pass. However, on fields where leaching irrigations were carried out, harrowing in early spring may be ineffective due to strong compaction of the arable layer. Instead of harrowing on such soils, chiseling or disking is carried out with simultaneous harrowing.

5-10 days before or immediately before sowing, on non-saline soils harrowing with smoothing is carried out. On fields clean of weeds, one can limit oneself to leveling the surface with a leveler or smoothing harrow; on medium and heavily infested lands — cultivators or chisels with flat-cutting working bodies in coupling with harrows and smoothing harrow.

Irrigation

To ensure cotton's water requirement, the soil moisture in the root layer must be more than 65-70% MWC, which is achieved by using irrigation. At soil moisture less than 65% MWC, yield decreases, whereas at moisture above 80% MWC, branch overgrowth occurs.

Irrigations can be reserve (moisture-recharging, in some cases also leaching) and growing-season. Reserve irrigations improve the physical state of the soil, promote removal of harmful salts from the upper soil layers, create a moisture reserve for normal cotton development, and help reduce pest numbers.

Reserve, or moisture-recharging, irrigations in the autumn-winter period serve to accumulate moisture in the soil and ensure seed germination and emergence of cotton seedlings. They are carried out after cotton harvesting along furrows, strips and large checks. Irrigation is also carried out in winter, before the onset of severe frosts. For these purposes furrows are cut, along which water moistens the soil. On light soils and with deep groundwater occurrence, reserve irrigations are done in early spring.

The norm of reserve irrigation in winter is 1000-1500 m3/ha, in spring — 800-900 m3/ha. On saline soils reserve irrigations are also leaching; the irrigation norm reaches 3000 m3/ha.

In spring, to preserve moisture, harrowing in 1-2 passes is carried out or continuous chiseling to a depth of 6-8 cm is used.

Growing-season irrigations are done during the cotton vegetation period: before the flowering phase, during flowering and during ripening. For example, two irrigations are carried out — before flowering, three or four — during flowering and one — during ripening. Such a distribution of irrigations is conventionally designated 2-3-1 or 2-4-1 and is called an irrigation scheme. Irrigations may also be carried out when soil moisture decreases to 65-75% MWC for stable provision of plants with water.

The total number of growing-season irrigations depending on soil type and groundwater occurrence is from 2 to 12. On the basis of numerous studies, SoyuzNIKHI developed approximate irrigation norms for medium-fiber cotton varieties on old arable lands.

Table. Irrigation norms for medium-fiber cotton varieties.

Soil type and depth of groundwater occurrenceNumber of irrigationsIrrigation norm, m3/ha
before floweringduring floweringat ripeningtotal
Thin soils with close occurrence of gravel and sand and deep groundwater2-34-62-38-126000-8400
Sierozems with groundwater at a depth of 3-4 m and more1-23-51-25-95200-7800
Sierozem-meadow soils with groundwater at a depth of 2-3 m1-23-40-14-74200-6500
Meadow soils with groundwater at a depth of 1-2 m12-403-53000-5000
Meadow-bog soils with groundwater at a depth of up to 1 m02-302-32000-3200

For old arable fields with deep groundwater occurrence, with furrow irrigation the following norms are recommended.

Table. Irrigation rates for medium-fiber cotton varieties (SoyuzNIKHI).

Soils (by texture)Irrigation rates, m3/ha
before floweringduring floweringat ripening
Light700750-800650
Medium800900-1000750
Heavy9001000-1200850

On heavy soils the irrigation rates are increased, but they are carried out less often.

The irrigation rate after plowed alfalfa is increased by 100-300 m3/ha.

Starting cotton irrigation too early is not recommended. With early and frequent irrigations, its root system develops in the upper soil horizons and therefore does not sufficiently supply the aboveground part of plants with water during flowering and ripening. Besides, excess moisture in the early vegetation period promotes abundant development of vegetative mass at the expense of generative organs.

However, it is important to carry out the first irrigation in a timely manner, since delay can greatly retard the development of cotton plants. Depending on the state of the soil and seedlings, the first irrigation is carried out 2-3 weeks after emergence. To ensure good cotton growth, approximately 2-3 irrigations should be carried out before flowering (by the beginning of June). Increased irrigations in August and September promote intensive growth of vegetative organs, which leads to delayed boll ripening.

The timing of irrigations is determined by the state of the plants: before flowering — by darkening of leaves and slight wilting in the midday hours, whereas during flowering — by the position of the upper flower. Properly irrigated cotton by the beginning of flowering has 8-9 fruiting non-flowering branches above the last flower, at the end of July — 6-7 branches, at the end of August — not more than 4. However, the most objective indicator for establishing irrigation dates is soil moisture, which should not decrease below 70% MWC. Besides, a methodology has been developed for determining irrigation dates by physiological indicators: sucking power of cells and concentration of cell sap.

Usually cotton irrigation is carried out along furrows. Furrows for the first irrigation are cut to a depth of 16-18 cm, for subsequent ones — up to 20 cm. The length of furrows is determined depending on soil permeability and the slope of the furrow bottom. At medium slopes (from 0.001 to 0.005) and weak soil permeability, furrows are made 120-150 m long, at medium — 100-120, at strong permeability — 90-100 m. The force of the water stream at small slopes should be up to 1-1.2 l/s, at large — 0.1-0.3 l/s. For furrow irrigation, flexible polyethylene siphon tubes are usually used.

When using industrial cotton cultivation technology for irrigation, instead of cutting furrows, rigid and semi-rigid polyethylene irrigation pipelines, flexible hoses, siphon tubes, machines of the PPA-165U type or sprinkler installations (DDA-100M, “Volzhanka”, “Fregat”, etc.) are used.

When using pipelines, water is supplied to the fields through concrete-lined flumes, strengthened at a certain height above the soil surface to ensure water pressure. Water is taken into the pipelines with the help of hydrants. The use of pipelines and sprinkler installations allows regulating water supply, economizing its consumption and automating the irrigation process.

The sprinkler method allows reducing water consumption by 2-4 times, while eliminating the need for cutting furrows and leveling the field. Besides, sprinkler installations allow spraying plants to control pests and diseases.

Subsoil irrigation is carried out using porous pipes or perforated hoses, which are placed at a depth of 40-50 cm in rows every 1-1.5 m. During the growing season, water pressure is maintained in them, thereby ensuring sufficient soil moisture.

The combination of furrow irrigation and sprinkling is economically more advantageous than ordinary furrow irrigation.

Sowing

Seed preparation

For sowing, cotton seeds with purity of not less than 97% and germination not lower than 85% are used.

The best sowing qualities are considered to be seeds obtained from raw cotton of the first opened bolls. According to experiments conducted in Uzbekistan, the field germination of seeds of the first collection was 94%, whereas of the last pre-frost collection less than 50%. Thus, when sowing seeds from bolls that ripened on September 4-10, 3.9 t/ha of raw cotton was obtained, and from bolls that ripened on September 29 — October 9 — 2.3 t/ha.

Raw cotton for seeds at cotton gins is subjected to primary processing, including ginning, lintering and delinting. Besides, preparation of seed material includes calibration, dressing and coating in the presence of pubescence.

Ginning — the process of complete separation of fiber from seeds. Lintering — the process of partial separation of fuzz from seeds. During ginning and lintering, cotton seeds can be mechanically damaged.

Delinting — the process of complete removal of fuzz from seeds. Delinting can be mechanical, chemical (exposure of seeds to acids) and aerochemical (exposure to gaseous reagents). The aerochemical method is most interesting, as it does not damage seeds and does not reduce their sowing qualities. Besides, under the action of gaseous reagents, seeds are disinfected from gummosis and other diseases, thus eliminating the need for chemical protection agents.

The Research Institute of Plant Protection (Tashkent) recommends coating bare and pubescent seeds, which consists in enveloping the seeds with a mixture of nutrient, protective and stimulating substances. Coated seeds are distinguished by greater flowability and protection from diseases and decay in the soil.

Pubescent seeds may also be used for sowing. They are treated against gummosis and root rot with 65% feptiuram at the rate of 10-12 kg/t of seeds. Before sowing, such seeds are moistened with water in three portions (600 l/t of seeds), for which they are spread on a cemented area in a layer of 20-30 cm, moistened and turned over 2-3 times with an interval of 4-5 hours. The moistened seeds are gathered in heaps and covered with tarpaulin or film for tempering. At early sowing dates in moist soil, tempering is completed in 8-12 hours, at late dates in 20-24 hours.

Bare seeds are sown in dry form.

It is not allowed to moisten pubescent coated seeds.

Sowing dates

Sowing of cotton begins when the soil at a depth of 10 cm warms up to 12 (13) °C and a stable average air temperature of (12) 13-15 °C is established. As a rule, in the southern cotton-growing regions such conditions are created in the third decade of March, in the middle — at the end of March — beginning of April, in the northern — in the second decade of April.

Too early sowing of cotton leads to a lengthening of the growing season, whereas too late sowing — to delayed boll opening and reduced pre-frost raw cotton collection.

Sowing dates are recommended to be specified taking into account soil, hydrological and weather conditions. Sowing usually begins on light, well-warmed lands of southern slopes. The duration of sowing is not recommended to be stretched out.

Sowing methods

When sowing pubescent seeds, row (belt) or frequent-nest sowing methods are used. Often preference is given to the wide-row sowing method, which allows ensuring better warming of plants, reducing the incidence of wilt, facilitating inter-row cultivation, irrigation, mechanized harvesting, accelerating boll ripening by 4-7 days, reducing labor costs and obtaining a yield increase of up to 0.3-0.5 t/ha.

With industrial cotton cultivation technology, sowing is carried out with bare seeds with precise sowing of a specified number of seeds in each nest, thus obtaining the specified plant stand density without thinning.

In cotton growing, the inter-row spacing is usually 60 and 90 cm with distances between nests of 10-30 (60) cm. When using the dotted sowing method, seeds are sown every 10 cm, 1-2 per nest. Such a scheme ensures the most uniform distribution of plants and the specified stand density — 100-150 thousand plants per 1 ha without thinning seedlings.

A relatively new sowing method is sowing on removed ridges (ridge method). It is carried out with the help of a ridge-maker or hiller, which cut furrows and form ridges 20-30 cm high. With a special device — a ridge remover — during sowing the upper dry soil layer is removed and seeds are planted in loose, moist, well-warmed soil. This method allows obtaining early and uniform seedlings.

With industrial technology, sowing is carried out with 4-row seeders STKh-4G, equipped with a device for applying herbicides and sowing on ridges. Seeders SKhU-4 and SKhU-8 are also used.

Sowing rates

The sowing rate of cotton seeds depends on the inter-row spacing, nest placement schemes, quality of seed material, and conditions during sowing. The rate varies from 35-40 kg/ha to 70-80 kg/ha (Vavilov). According to other recommendations, the sowing rate of bare seeds is 20-25 kg/ha, pubescent — 90-100 kg/ha.

To obtain a high raw cotton yield, the plant stand density should be 100-110 thousand/ha, on thin and sandy soils — up to 130-150 thousand/ha.

The sowing rate is increased by 10-15% when sowing on fields infected with wilt, as well as on saline soils.

Seed sowing depth

On sierozem soils the sowing depth is 4-5 cm, on meadow-bog — 3-4 cm.

At early sowing dates in moist soil, the planting depth should be 3-4 cm, and as the soil warms and dries, the depth is increased to 4-5 cm.

Bare seeds are recommended to be sown 1 cm shallower than pubescent ones, but necessarily in moist soil.

Crop care

Care of cotton sowings before emergence consists in destroying the soil crust with light harrows or rotary hoes.

When the upper soil layer dries out, it is recommended to carry out a supplemental irrigation with a consumption rate of 600 m3/ha. For its implementation, irrigation furrows are cut during sowing.

To ensure optimal plant stand density, thinning is carried out not later than the phase of formation of the first (second) true leaf. Depending on the applied agrotechnologies, soil fertility, varietal characteristics and sowing method, the stand density should be in the range from 70 to 160 thousand plants per 1 ha. When using precise sowing and observing optimal conditions, the specified stand density can be obtained without thinning.

When seedlings appear, inter-row soil cultivation begins. Depending on the purposes of each treatment, various working bodies can be used on cultivators: razor or flat-cutting shares, hillers, rotary stars, etc.

The first longitudinal cultivation is performed to a depth of 6-8 cm with simultaneous loosening of the protective zones, the width of which in this period of plant development is 10-12 cm on each side of the row. The second cultivation is recommended before the first growing-season irrigation. Subsequent cultivations — 2-3 days after each irrigation, when the soil has somewhat dried.

For loosening the inter-row spaces, the outer working bodies of the cultivators are set to a depth of 8-10 cm, the middle ones — to 12-15 cm. Starting from the 2nd-3rd cultivation, the width of the protective zones is increased to 16 cm.

The number of inter-row treatments after irrigations is determined by the number of irrigations during the growing season and the onset of complete closing of cotton rows, which usually occurs in the second half of the flowering phase.

Weed control using herbicides is important in cotton crop care. Against annual weeds, continuous pre-sowing application of treflan is used with subsequent incorporation by harrowing or disking. For applying the herbicide, sprayers of the OVKh-14 type are used. The application rate of treflan is 4 kg/ha on light soils, 6 kg/ha — on medium and heavy. Working fluid consumption — 400 l/ha.

To control weeds in cotton rows, during sowing the herbicide cotoran is applied in strips 20-30 cm wide at the rate of 0.8-1.75 kg/ha and a working solution consumption of 200 l/ha. For these purposes, devices PGS-2.45 or PKhG-4 can be used, which are aggregated with cotton seeders.

The use of chemical control agents causes the death of 93-96% of weeds, accelerates cotton ripening and increases the collection of pre-frost raw cotton.

In cotton crop care, the practice of topping is important, consisting in removing the growth points of the main stem and monopodial branches. Topping makes it possible to prevent shedding of buds and ovaries, as it creates more favorable conditions for their nutrition and illumination. According to experiments of SoyuzNIKHI, topping of cotton increases raw cotton yield by up to 1.1 t/ha.

The effectiveness of cotton topping depends on the timing. If carried out too early, yield decreases. First of all, topping should be carried out from July 15 to 25 on plots with vigorous plant development when 17-18 fruiting branches have formed on them. On medium-developed plants, topping is carried out when there are 15-16 fruiting branches, not later than August 5. On weakly developed plants — when 12-14 fruiting branches have formed, not later than August 10 (Vavilov). According to other recommendations, topping should be carried out when 12-16 sympodial branches have formed on plants for medium-fiber varieties and 14-20 branches — for fine-fiber varieties.

Topping can be carried out using the device 4VKh-4, which is intended for cutting the tops of cotton plants. It is mounted on a tractor with a cultivator KRKh-4.

Mechanized topping is performed in the second half of July — beginning of August in two periods. The first topping begins when 40-50% of plants have formed 15 or more fruiting branches; the second — 7-10 days after the first. During the second pass, the tops of lagging plants are cut. The knives of the topping device are set 3-5 cm higher than during the first topping. Usually, topping is recommended to be combined with cutting irrigation furrows or loosening inter-row spaces.

According to calculations of research institutions, the costs of two-time mechanized topping are 3.7 times less than for manual topping.

The most harmful diseases for cotton are considered wilt and Fusarium wilt. To control them, approved chemical plant protection agents are used.

Harvesting

Ripening of cotton bolls occurs non-simultaneously and lasts about two (three) months (until frost). Therefore, raw cotton harvesting is carried out as bolls open: with mechanized harvesting — in three passes, two of which with cotton-picking spindle machines and one — with kurak-harvesting machines; with manual harvesting — in four passes.

The cotton-picking vertical-spindle machines developed in Soviet times did not allow collecting raw cotton from plants with a large number of green leaves. Therefore, the technology of mechanized harvesting of such sowings presupposes defoliation before harvesting — treatment of cotton with chemical preparations for rapid leaf fall.

As a defoliant, spraying with magnesium chlorate is used, at the rate for medium-fiber cotton — 8-12 kg/ha, fine-fiber — 13-15 kg/ha. Instead of magnesium chlorate, calcium chlorate-chloride can be used, at the rate of 20-30 kg/ha.

Relatively new preparations include hydrel, with a recommended consumption rate of 6-8 kg/ha for medium-fiber cotton or in a mixture with butyl-caitax in compositions from 3+3 kg/ha to 5+5 kg/ha. Defoliants of the UDM type are based on magnesium chlorate in a mixture with nitrogen fertilizers. Spraying of sowings is carried out from airplanes or helicopters when in most plants boll opening occurs in the northern cotton-growing regions at 2 bolls, in the central regions — 2-3 bolls and in the southern — 4-5 bolls (Vavilov). According to other recommendations, defoliation is recommended when 3-4 bolls open on medium-fiber cotton plants or 4-5 — on fine-fiber (Kolomeichenko). Leaf fall after treatment occurs on the 8th-10th day.

The use of the ground sprayer OVKh-28 allows reducing the negative impact of chemicals on the environment and increasing the effectiveness of defoliants.

If the effect of defoliation is insufficient, desiccation is resorted to, that is drying of plants on the root. As desiccants, magnesium chlorate is used at the rate of 25-30 kg/ha or calcium chlorate-chloride — 45-50 kg/ha. Desiccation allows accelerating the ripening of bolls remaining after the first harvests in years with unfavorable weather conditions, as well as freeing turning strips when using the mechanized harvesting method.

For harvesting raw cotton, two-row vertical-spindle cotton-picking machines KhVN-1.2A can be used on sowings with 60 cm inter-row spacings, KhNP-1.8 — on sowings with 90 cm inter-row spacings, four-row cotton-picking machines 14KhV-2.4A on 60 cm inter-row spacings. For harvesting seed raw cotton, machines for layer-by-layer collection of seed raw cotton KhVA-1.2 (60 cm) or KhVB-1.8 (90 cm) can be used.

For collecting kurak, that is unopened bolls after frosts, kurak-harvesting machines SKO-2.4 are used with 60 cm inter-row spacings or SKO-3.6 and SKO-5.4 with 90 cm inter-row spacings.

Mechanized harvesting of raw cotton is carried out on fields cleared of weeds and after 75-80% of cotton leaves have fallen after defoliation. Harvesting is carried out in three passes:

  • first collection — with cotton-picking spindle machines when not more than 50-60% of bolls have opened;
  • second collection — with the same machines when another 20-30 (35)% of bolls have opened, which usually occurs 12-15 days after the first collection;
  • third collection — with kurak-harvesting machines, which collect the remaining bolls on the bushes.

Fallen raw cotton after the first and second collections is picked up from the soil surface by mechanical pickers PKh-2.4 (on 60 cm inter-row spacings) or PKhS-3.6 (on 90 cm inter-row spacings).

From the bins of cotton-picking machines, raw cotton is unloaded into bulk transport vehicles and delivered to the procurement point. Before sending to the procurement point, raw cotton must be dried to a moisture content of 8-12% and cleaned.

Manual harvesting of raw cotton is carried out in four (in some cases up to eight) passes on fields clean of weeds. The first collection begins when there are on average 3-4 well-opened bolls on the plant. During the second collection, the picking of raw cotton from well-opened bolls is completed before the end of the vegetation period of cotton plants. During the first and second collections, picking of immature raw cotton from incompletely opened bolls or collection of raw cotton with abundant dew on the fields is not allowed.

During the third and fourth collections, the raw cotton remaining on the bushes is picked.

Raw cotton from manual collection is divided into four grades depending on fiber strength.

The mechanized method of raw cotton collection, compared with manual collection, allows reducing labor costs by 3-4 times and lowering the cost of raw cotton by 2 times.

Harvesting of cotton stems (guza-paya) after collecting all cotton is carried out with uprooters KV-4A and KV-3.6A.

The use of industrial technologies, for example, on the Pyatiletie Uzbekistan state farm, allowed reducing labor costs to 459 man-hours/ha, which is 2 times less than the average for other farms. The raw cotton yield reached 4 t/ha, production costs — 11.5 man-hours/c, which is 3 times less than on other farms.

Cotton varieties

Cotton varieties used in the USSR, depending on length, fineness and color of fiber, were divided into:

  • varieties of Soviet medium-fiber cotton (Gossypium hirsutum L.);
  • varieties of Soviet fine-fiber cotton (Gossypium peruvianum Gav.).

By 1984, 38 cotton varieties were used in the USSR, of which 26 were medium-fiber and 12 fine-fiber. After the collapse of the USSR, cotton breeding in Russia was started practically from the beginning. By 2006, 14 varieties had been included in the State Register of Breeding Achievements:

  • POSS 1 (1999). Bred by the Prikumsk Experimental Breeding Station (Budennovsk);
  • AS 4 (2000). Bred by the Caspian RI of Arid Agriculture (Astrakhan Oblast);
  • AS 5 (2000). Bred by the Caspian RI of Arid Agriculture (Astrakhan Oblast);
  • AS 6 (2000). Bred by the Caspian RI of Arid Agriculture (Astrakhan Oblast);
  • AS 7 (2000). Bred by the Caspian RI of Arid Agriculture (Astrakhan Oblast);
  • Limansky (2001). Bred by Russian Cotton LLC (Astrakhan Oblast);
  • Mikhailovsky (2001). Bred by Russian Cotton LLC (Astrakhan Oblast);
  • RKh 95 (2001). Bred by Russian Cotton LLC (Astrakhan Oblast);
  • Pioner (2001). Bred by the ARRI of Plant Industry (St. Petersburg);
  • POSS 2 (2003). Bred by the Prikumsk Experimental Breeding Station (Budennovsk);
  • POSS 3 (2003). Bred by the Prikumsk Experimental Breeding Station (Budennovsk);
  • Khristina (2003). Foreign variety, bred in Greece.
  • Goliot (2005). Bred by the Prikumsk Experimental Breeding Station (Budennovsk);
  • POSS 4 (2006). Bred by the Prikumsk Experimental Breeding Station (Stavropol Krai).

Medium-fiber varieties

Tashkent 1. The variety was bred by the Institute of Experimental Biology of the Academy of Sciences of the Uzbek SSR. Growing season 140-150 days. Raw cotton mass of one boll 6.5-7.0 g, fiber yield 36-38%, staple length 32-33 mm, metric number 5430, strength 0.0046-0.0049 N (4.6-4.9 gf), breaking length 24.4 km. It has high resistance to Verticillium wilt. Released in Uzbekistan, Kyrgyzstan and Tajikistan.

108-f. The variety was bred by the Andijan Branch of the All-Union Research Institute of Cotton Growing (SoyuzNIKHI). Growing season 140-150 days. Raw cotton mass of one boll is 6.5-7.5 g, fiber yield 34-35%, staple length 32-33 mm, metric number 5520, strength 0.0046-0.005 N (4.6-5 gf), breaking length 25.4 km. Weakly resistant to wilt. Released in Uzbekistan and Kazakhstan.

175-f. The variety was bred at the Andijan Branch of SoyuzNIKHI. It ripens 3-5 days later than 108-f. It is distinguished by good fiber quality: fiber length 36.4 mm, strength 0.0046 N (4.6 gf), metric number 6500. It is less affected by wilt than Tashkent 1. Released in Uzbekistan.

149-f. The variety was bred by the Andijan Branch of SoyuzNIKHI. Growing season 135-155 days. Raw cotton mass of one boll 6.3-7.5 g, fiber yield 34-36%, staple length 35-36 mm, metric number 6040, strength 0.0044-0.0046 N (4.4-4.6 gf), breaking length 26.6 km. Resistance to wilt is low. Released in Uzbekistan, Kyrgyzstan, Turkmenistan.

S-4727. The variety was bred by the RI of Cotton Breeding and Seed Production. Growing season 130-148 days. Raw cotton mass of one boll 6.5-7.0 g, fiber yield 36-37%, staple length 32-33 mm, metric number 5660, fiber strength 0.0046 N (4.6 gf), breaking length 25.5 km. Resistance to wilt is low. Released in Uzbekistan, Kazakhstan, Azerbaijan, Turkmenistan.

Other medium-fiber cotton varieties: 138-f, 175-f, S-2606, 133, Kzyl-Ravat, 3038, Andijan 2, Regar 34, Regar 1, Chimbay 3010, Chimbay 160, Tashkent 6, Tashauzsky 17, Ok-Oltyn, An-402, Samarkand 3, An-Samarkand 2, Farkhad, An-Uzbekistan 3, Uychi 2, Kyrgyzsky 2.

Fine-fiber varieties

Ashkhabad 25. The variety was bred by the Ashkhabad Branch of the Turkmen RI of Breeding and Seed Production of Fine-Fiber Cotton. Resistance to Fusarium wilt is medium. Growing season 140-150 days. Raw cotton mass of one boll 3.5-3.7 g, fiber yield 33-35%, fiber length 40-41 mm, fineness 7700-8200, strength 0.0045-0.0048 N (4.5-4.8 gf). Released in Turkmenistan, Tajikistan, Uzbekistan.

9647-I. The variety was bred by the Turkmen RI of Breeding and Seed Production of Fine-Fiber Cotton. Growing season 140-153 days. Raw cotton mass of one boll 3.2-3.6 g, fiber yield 30-31%, staple length 40-41 mm, metric number 8380, strength 0.0047 N (4.7 gf). Resistance to Fusarium wilt is high. Released in Tajikistan, Turkmenistan.

S-6037. The variety was bred by VIIISSKh. Growing season 145-155 days. Bush extremely compressed with zero type of branching. Raw cotton mass of one boll 3.8-4.2 g. Fiber yield 30-32%, fiber length 32-40 mm, fineness 7800-8400, strength 0.0045-0.0048 N (4.5-4.8 gf). Released in Uzbekistan, Tajikistan.

Other fine-fiber cotton varieties: 5904-I, 8386-V, 9732-I, 6465-V, 6249-V, 7318-V, T-7, Druzhba 60, Sharaf 80, 9647-I.

List of sources

  1. Vavilov P. P., Gritsenko V. V., Kuznetsov V. S. et al. (1986). Plant Growing. Ed. by Vavilov P. P. 5th ed., revised and enlarged. Moscow: Agropromizdat.
  2. Kolomeichenko V. V. (2007). Plant Growing/Textbook. Moscow: Agrobiznescentr.
  3. Niklyaev V. S. (2000). Fundamentals of Agricultural Production Technology. Agriculture and Plant Growing. Moscow: “Bylina”.