Arthropods: General Body Plan

Last updated: October 02, 2026

1. Introduction: The Place of Arthropods in the Animalia System

We begin a lecture devoted to one of the most amazing and numerous groups of animals on our planet — the phylum Arthropoda. Today we will lay the foundation for understanding why this group achieved such evolutionary success and which key structural features ensured its dominant position in most of Earth's ecosystems.

1.1. The Scale of Diversity: Why Arthropoda Is the Largest Animal Phylum

Let us start with impressive numbers. According to modern estimates, the number of described arthropod species exceeds 1.2 million, and this is only the tip of the iceberg (Miller, 2024, ch. 14; Hickman, 2004, ch. 18). Thousands of new species are described every year, and the total estimated number of existing species, according to various estimates, ranges from 3 to 8 million (Schierwater, 2022, ch. 27). For comparison: all other animal phyla combined contain a significantly smaller number of species. It is arthropods that make up more than 80% of all animals known to science (Miller, 2024, ch. 15).

When we speak of arthropods, we mean not only the insects familiar to everyone, but also spiders, scorpions, mites, crustaceans (crabs, lobsters, shrimp, daphnia, cyclops), millipedes, and a number of other groups. The diversity of their forms is truly enormous: from microscopic mites less than 0.1 mm in size to the Japanese spider crab with a leg span of almost 4 meters (Miller, 2024, ch. 14).

1.2. Phylogenetic Position: Place in the Animalia System

To understand the place of arthropods in the animal world, we need to recall the basics of macrosystematics. Arthropods belong to the group Ecdysozoa — a superphylum of protostomes characterized by periodic shedding of the cuticle during growth (molting) (Miller, 2024, ch. 14; Regier et al., 2010). Besides arthropods, this group includes roundworms (Nematoda), horsehair worms (Nematomorpha), kinorhynchs (Kinorhyncha), and a number of other less known groups.

Within Ecdysozoa, arthropods together with velvet worms (Onychophora) and tardigrades (Tardigrada, water bears) form the clade Panarthropoda (Miller, 2024, ch. 14; Schierwater, 2022, ch. 28). This clade unites animals with a segmented body, paired appendages, and a chitinous cuticle that is shed during molting. It is important to understand that onychophorans and tardigrades are not arthropods in the strict sense, but their closest relatives, which have retained a number of primitive structural features. Molecular data convincingly confirm the monophyly of Panarthropoda and the sister relationships among these three groups (Regier et al., 2010).

Modern arthropod phylogeny, based on molecular and morphological data, distinguishes several large clades. Traditionally, the phylum Arthropoda is divided into four modern subphyla: Chelicerata, Myriapoda, Crustacea, and Hexapoda (Miller, 2024, ch. 14; Hickman, 2004, ch. 18). However, modern phylogenetic studies have shown that crustaceans in the traditional sense are not a monophyletic group: insects (Hexapoda) originated from ancestors close to crustaceans and together with them form the clade Pancrustacea (Regier et al., 2010; Schierwater, 2022, ch. 26). Thus, crustaceans are a paraphyletic group, and hexapods are terrestrial crustaceans, so to speak (Miller, 2024, ch. 15).

Chelicerata include spiders, scorpions, mites, horseshoe crabs, and sea spiders. They are characterized by the absence of antennae and the presence of chelicerae — the first pair of appendages modified for capturing and crushing food (Schierwater, 2022, ch. 28). Myriapoda are terrestrial arthropods with numerous body segments and one pair of appendages per segment (or two pairs in millipedes) (Schierwater, 2022, ch. 29).

1.3. Why Arthropods Dominate Terrestrial, Aquatic, and Aerial Environments

Arthropods are the only group of animals that has mastered all possible habitats: from deep-ocean trenches to high mountains, from polar ice to tropical forests, from soil to air (Miller, 2024, ch. 14). They occur in fresh waters, seas, and oceans, in soil, on plants, and in the bodies of other animals. Such ubiquitous distribution is explained by a complex of key adaptations that we will examine in detail in the following sections.

In aquatic ecosystems, crustaceans occupy a central place in food webs, often dominating in biomass. For example, copepods (Copepoda) and euphausiids (Euphausiacea, krill) are key links in marine trophic chains, providing food for fish, whales, and seabirds (Schierwater, 2022, ch. 26). In terrestrial ecosystems, insects and arachnids make up the bulk of arthropods, occupying almost all ecological niches — from phytophages and predators to parasites and detritivores (Miller, 2024, ch. 15; Pedigo, 2002, ch. 2).

In the aerial environment, insects are the only invertebrates capable of active flight. This gave them an enormous advantage in dispersal, food search, and avoiding predators (Miller, 2024, ch. 15). Insect flight is one of the key innovations that determined their evolutionary success.

2. Exoskeleton and Molting

We have already established that arthropods are the dominant group of animals on Earth. But what exactly underlies their amazing success? The answer lies in the unique construction of their external skeleton. It is the exoskeleton, or external skeleton, that is the key innovation which determined the appearance and lifestyle of all arthropods (Miller, 2024, ch. 14; Hickman, 2004, ch. 18).

2.1. Chitinous Exoskeleton: Composition and Structure

The arthropod exoskeleton is not merely a hard shell. It is a complex, multilayered structure secreted by the single-layered epithelium lying beneath it, which in arthropods is called the hypodermis (Pedigo, 2002, ch. 2; Roberts, 2013, ch. 33). Let us examine its layers, moving from the outside inward.

The outermost, thin layer is the epicuticle. Its thickness usually does not exceed 1–4 µm (McGavin, 2022, ch. 1). The epicuticle consists of lipoproteins and is often covered with a wax-like layer. It is this layer that ensures the waterproofness of the integument, preventing moisture loss from the body. This is a critically important adaptation for life on land. In terrestrial arthropods, the epicuticle also serves as a barrier against microorganisms and many chemicals (Miller, 2024, ch. 14).

Beneath the epicuticle lies the procuticle — the main, thickest part of the exoskeleton. It consists of chitin — a strong polysaccharide — bound to proteins (Pedigo, 2002, ch. 2; Roberts, 2013, ch. 33). Chitin gives the cuticle flexibility and lightness, but not hardness. Hardness is achieved through two processes: sclerotization (tanning of proteins) and incrustation with calcium salts (in crustaceans). The procuticle, in turn, is subdivided into two layers:

  • Exocuticle — the outer layer of the procuticle, which is secreted before molting. It is here that sclerotization occurs, that is, the chemical "cross-linking" of protein chains, which gives this layer hardness and dark coloration (Pedigo, 2002, ch. 2).
  • Endocuticle — the inner, thicker layer, which is secreted after molting. It is less sclerotized, contains more chitin, and gives the cuticle elasticity and the ability to stretch (McGavin, 2022, ch. 1).

This structure — a combination of a hard outer exocuticle and an elastic inner endocuticle — provides an amazing combination of strength and flexibility. In places where special mobility is needed (for example, in the joints of appendages or between body segments), the procuticle remains thin and unsclerotized, forming flexible membranes. And where special hardness is required (for example, in mandibles or claws), sclerotization is maximally expressed (Roberts, 2013, ch. 33).

2.2. Functions of the Exoskeleton

The exoskeleton performs many vitally important functions (Miller, 2024, ch. 14; Hickman, 2004, ch. 18):

1. Protection. It serves as a mechanical barrier, protecting the body from predators, damage, and pathogen penetration.

2. Support. The exoskeleton is an external skeleton to which muscles attach from the inside. This allows arthropods to perform fast and precise movements.

3. Water barrier. The wax layer of the epicuticle prevents desiccation, which allowed arthropods to colonize the driest habitats.

4. Muscle attachment site. Internal outgrowths of the cuticle, called apophyses or apodemes, serve as attachment sites for powerful musculature (Roberts, 2013, ch. 33).

5. Sensory function. The cuticle forms various sensilla — sensitive hairs, bristles, pits — which perceive mechanical, chemical, and other stimuli.

2.3. Molting (Ecdysis) as a Necessary Condition for Growth

However, this perfect external skeleton has one significant drawback: it cannot stretch. How do arthropods grow if their body is enclosed in hard "armor"? The solution to this problem is periodic molting, or ecdysis (Miller, 2024, ch. 14; Pedigo, 2002, ch. 2). Molting is the process of shedding the old exoskeleton and replacing it with a new, more spacious one.

Arthropod growth, unlike that of vertebrates, occurs not continuously but in jumps. The period between molts is called intermolt, and the developmental stage between two successive molts is called an instar (McGavin, 2022, ch. 1). The number of molts varies over the lifespan, but is usually strictly determined for each species.

2.4. Stages of Molting

The molting process is a complex sequence of events that can be divided into several stages (Miller, 2024, ch. 14; Roberts, 2013, ch. 33):

1. Preparatory stage (proecdysis). The hypodermis separates from the old cuticle. In the resulting space, molting fluid accumulates, containing enzymes (chitinases and proteases) that begin to dissolve the old endocuticle. The breakdown products are absorbed and used to build the new cuticle.

2. Formation of the new cuticle. The hypodermis begins to secrete a new epicuticle, and then a new procuticle. The new cuticle is initially soft and wrinkled; it is gathered into folds to provide a growth reserve after molting.

3. Molting proper (ecdysis). The old cuticle ruptures along certain lines (rupture lines), usually on the dorsal side of the body. The animal emerges from the old "clothing," making wave-like movements. Blood pressure (haemolymph) helps rupture the old cuticle and expand the new one.

4. Postecdysis. Immediately after molting, the new cuticle is soft and elastic. The animal increases in size by swallowing air or water to stretch it. Then the process of sclerotization (hardening) and pigmentation of the new cuticle begins.

2.5. Hormonal Regulation of Molting

The molting process is under strict hormonal control (Miller, 2024, ch. 14; Roberts, 2013, ch. 33). In insects, two main hormones participate in this:

  • Ecdysteroids (for example, ecdysone, 20-hydroxyecdysone). This hormone, produced by the prothoracic glands, triggers the molting process itself. Its level in the haemolymph rises, signaling the beginning of preparation for ecdysis.
  • Juvenile hormone (JH). This hormone, produced by the corpora allata, determines what the result of molting will be. If the JH level is high, then at the next molt the animal remains a larva (or nymph). When the JH level falls, the next molt leads to metamorphosis — transformation into an adult or into a pupa. In adult insects, JH is usually not produced, so they no longer molt.

In crustaceans, analogous roles are played by hormones produced in the eyestalks (for example, molt-inhibiting hormone, MIH, and molting hormone, MH) (Roberts, 2013, ch. 33).

2.6. Molting — A Vulnerable Period

The molting period is the time when an arthropod is most vulnerable (Miller, 2024, ch. 14). Until the new cuticle hardens, the animal cannot actively defend itself from predators. Many species hide in shelters, burrows, or become immobile during molting. This is why molting is often synchronized with certain seasons or times of day when the risk of being eaten is minimal. In addition, during this period the animal cannot feed, since the lining of the foregut and hindgut is also shed.

2.7. Constraints Imposed by the Exoskeleton on Body Size

There is a widespread opinion that it is the exoskeleton that limits the maximum size of arthropods (McGavin, 2022, ch. 1). Indeed, as body size increases, the surface area of the cuticle grows as the square, while volume and mass grow as the cube. This means that relative strength and the ability to support body weight decrease. However, as McGavin (2022, ch. 1) notes, this is not the only or even the main reason. A more important limitation is the respiratory system. Tracheae, which deliver oxygen directly to tissues, cannot effectively supply oxygen to a very large and active animal. This is why the largest arthropods, such as some crustaceans and spiders, either lead a sedentary lifestyle or have highly developed specialized respiratory systems (for example, lungs in spiders). Body size is also limited by the molting process itself: it is difficult for a too-large animal to shed its old exoskeleton without injuring itself.

AliExpress WW

3. Segmentation and Tagmosis

We have already discussed that the exoskeleton provides protection and support, but it would be useless without another key feature of arthropod structure — their segmented body. It is segmentation in combination with tagmosis that creates the unique architectural plan that allows arthropods to move effectively, feed, and colonize a variety of habitats (Miller, 2024, ch. 14; Hickman, 2004, ch. 18).

3.1. Metamerism: True Segmentation

The body structure of arthropods, like that of their annelid ancestors, is based on metamerism — true segmentation. This means that the animal's body consists of successive, repeating blocks — segments, or metameres (Roberts, 2013, ch. 33). Each segment in the primitive state contains a similar set of structures: a body region, a pair of appendages, elements of the nervous system (ganglia), blood vessels, and excretory organs.

However, arthropod metamerism has a number of fundamental differences from the metamerism of annelids (Annelida). In annelids, segments are separated from each other by internal partitions — septa, and each segment is a closed hydrostatic compartment that participates in locomotion. In arthropods, internal partitions are largely lost, and the body cavity is a single mixocoel (mixed cavity), not divided into segmental compartments (Miller, 2024, ch. 14; Roberts, 2013, ch. 33). This is because the function of support and movement in arthropods was taken over by the external skeleton, and the hydrostatic skeleton, so important for worms, lost its significance.

In addition, in arthropods, segmentation affects primarily the external integument and associated structures (appendages, muscles), whereas internal organs (intestine, heart, nerve cord) retain segmental structure only partially (Miller, 2024, ch. 14).

3.2. Homonomous and Heteronomous Segmentation

During the evolution of arthropods, the segmentation of their body underwent important changes. In the most primitive fossil arthropods, such as trilobites (Trilobita), all trunk segments were more or less identical, and the appendages were of the same type. Such segmentation is called homonomous (from Greek homos — equal, identical) (Hickman, 2004, ch. 18). Homonomous segmentation is also characteristic of some modern primitive groups, for example, millipedes (Myriapoda) and larvae of some crustaceans.

However, in the vast majority of arthropods, body segments are not identical. They differ in size, shape, structure of appendages, and functions performed. Such segmentation is called heteronomous (from Greek heteros — different) (Hickman, 2004, ch. 18; Miller, 2024, ch. 14). It was heteronomous segmentation that allowed arthropods to specialize different body regions for different tasks: some segments bear sensory organs and mouthparts, others bear appendages for locomotion, and still others bear reproductive organs.

3.3. Tagmosis: Union of Segments into Body Regions

Heteronomous segmentation is inextricably linked with tagmosis — the process of uniting segments into functional groups called tagmata (from Greek tagma — rank, order) (Miller, 2024, ch. 14; Pedigo, 2002, ch. 2). Tagmosis is a key feature distinguishing arthropods from their annelid ancestors and from closely related onychophorans. If in annelids body segments are relatively uniform, in arthropods they are grouped into regions, each of which performs its own set of functions.

From an evolutionary point of view, tagmosis is the result of fusion of neighboring segments and specialization of their appendages. Externally, this manifests in the disappearance or weakening of boundaries between segments within a tagma, and the segments themselves may completely fuse, forming single structures (Roberts, 2013, ch. 33). For example, in insects the head is formed by the fusion of six segments, and in arachnids the cephalothorax is formed by the fusion of seven segments.

3.4. Main Tagmata in Different Arthropod Groups

Different arthropod groups are characterized by different sets of tagmata. This is related to their lifestyle, feeding method, and evolutionary history. Let us consider the main variants (Miller, 2024, ch. 14, 15; Schierwater, 2022, ch. 26–29).

Insects (Insecta, Hexapoda). The body of insects is clearly divided into three tagmata: head, thorax, and abdomen (Miller, 2024, ch. 15; Pedigo, 2002, ch. 2).

  • The head bears sensory organs (antennae, eyes) and mouthparts. It is formed by the fusion of six segments.
  • The thorax consists of three segments (prothorax, mesothorax, metathorax) and bears three pairs of walking appendages, and in winged insects also two pairs of wings.
  • The abdomen contains internal organs (digestive, excretory, reproductive systems). Appendages on the abdomen are usually absent in adult insects, although rudiments are retained in some primitive groups.

Arachnids (Arachnida) and crustaceans (Crustacea). In these groups, the body is divided into two tagmata: cephalothorax and abdomen (Miller, 2024, ch. 14; Schierwater, 2022, ch. 26, 28).

  • The cephalothorax is formed by the fusion of head and thoracic segments. It bears all appendages: in arachnids — chelicerae, pedipalps, and four pairs of walking legs; in crustaceans — two pairs of antennae, mandibles, two pairs of maxillae, and appendages performing walking and food-capturing functions.
  • The abdomen contains internal organs and in crustaceans often bears appendages (swimming, respiratory, reproductive), while in arachnids it lacks appendages.

Chelicerata. In chelicerates, in addition to the cephalothorax and abdomen, more subdivided regions are sometimes distinguished. For example, in horseshoe crabs (Xiphosura), the abdomen is subdivided into the mesosoma and metasoma (Schierwater, 2022, ch. 28). In spiders, the cephalothorax is called the prosoma, and the abdomen the opisthosoma (Hickman, 2004, ch. 18). These names reflect not only morphology but also the embryological origin of the regions.

Myriapoda. The body of myriapods is divided into two tagmata: head and trunk (Schierwater, 2022, ch. 29). The trunk consists of many similar segments, each bearing one or two pairs of appendages. The homonomous nature of trunk segmentation is a primitive feature distinguishing myriapods from insects.

3.5. Why Tagmosis Is a Key Feature of Arthropods

Tagmosis is one of the most important features that determined the evolutionary success of arthropods (Miller, 2024, ch. 14; Hickman, 2004, ch. 18). What are its advantages?

1. Division of functions. Each tagma specializes in performing certain tasks. The head is responsible for sensory perception and feeding, the thorax for locomotion, and the abdomen for digestion and reproduction. Such a division of labor increases the efficiency of the whole organism.

2. Cephalization. The union of segments into a head is accompanied by concentration of nerve centers and sensory organs at the anterior end of the body. This leads to the formation of a brain and complex behavior (Miller, 2024, ch. 14).

3. Resource economy. Fusion of segments and loss of unnecessary appendages allows energy and materials to be saved and directed to the development of more important structures.

4. Adaptive radiation. Different variants of tagmosis opened the way for arthropods to colonize a variety of ecological niches. For example, the division of the body into head, thorax, and abdomen in insects allowed them to master the aerial environment, while the fusion of the cephalothorax in arachnids helped them become effective predators.

3.6. Why Different Groups Have Different Tagmata

The diversity of tagmata in different arthropod groups reflects their adaptation to different environmental conditions and ways of life (Miller, 2024, ch. 15; Schierwater, 2022, ch. 26–29).

  • In insects, three tagmata are the result of adaptation to flight and a terrestrial lifestyle. The thorax, bearing wings and legs, is separated from the abdomen, which contains internal organs.
  • In arachnids, two tagmata are an adaptation to a predatory lifestyle. The cephalothorax bears all appendages necessary for capturing and holding prey, while the abdomen contains organs ensuring digestion and reproduction.
  • In crustaceans, two tagmata are a consequence of adaptation to an aquatic lifestyle. The cephalothorax bears appendages for swimming, walking, and filtering, while the abdomen is used for swimming and reproduction.
  • In myriapods, two tagmata are a primitive feature associated with their lifestyle in soil and litter.

Thus, tagmosis is not merely a mechanical union of segments, but an evolutionary process reflecting the adaptation of a group to its ecological niche.

3.7. Genetic Basis of Tagmosis

Modern developmental biology has shown that tagmosis is controlled by Hox genes — a special group of genes that determine the fate of each segment during individual development (Miller, 2024, ch. 14; Schierwater, 2022, ch. 27). Hox genes encode transcription factors that turn other genes on or off, determining whether a given segment will be head, thoracic, or abdominal.

It was changes in Hox gene expression that led to the appearance of different tagmata in different arthropod groups. For example, in insects the genes responsible for wing formation are expressed only in thoracic segments, while in crustaceans they are expressed in other segments. This explains why different arthropod groups form tagmata differently, although all of them use the same set of genetic tools.

4. Jointed Appendages

We have already discussed that the exoskeleton provides protection and support, while segmentation and tagmosis create the architectural basis of the arthropod body. However, all these features would be useless without another key innovation — jointed appendages. It was they that turned arthropods into the most mobile and diverse animals on the planet (Miller, 2024, ch. 14; Hickman, 2004, ch. 18).

4.1. Structure of an Appendage: Podomeres, Joints, Muscles

An arthropod appendage is not merely an outgrowth of the body, but a complex lever system consisting of individual podomeres, connected by movable joints (McGavin, 2022, ch. 1; Pedigo, 2002, ch. 2). Each joint is a region of thin, unsclerotized cuticle that provides flexibility and mobility. It is the presence of podomeres and joints that distinguishes arthropod appendages from non-jointed body outgrowths, for example, from the parapodia of annelids.

Inside the appendage are muscles that attach to internal outgrowths of the cuticle — apodemes (Roberts, 2013, ch. 33). Muscles work as antagonistic pairs: some flex the podomere, others extend it. Such a system allows fast, precise, and diverse movements. It is important to note that in arthropods muscles attach to the exoskeleton from the inside, not from the outside as in vertebrates. This is a fundamental difference that ensures high efficiency of movements at small body sizes (Miller, 2024, ch. 14).

The structure of a typical appendage can be examined using the example of an insect leg (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1). It consists of the following podomeres, counting from the body:

1. Coxa — the basal podomere connecting the leg to the body.

2. Trochanter — a small podomere providing additional mobility.

3. Femur — the thigh, often the largest podomere, containing powerful muscles.

4. Tibia — the shank, usually a long and thin podomere.

5. Tarsus — the foot, often consisting of several subsegments (tarsomeres).

6. Pretarsus — the terminal structure bearing claws, suckers, or other adaptations for attachment to the substrate.

In different arthropod groups, the number and structure of podomeres may vary, but the general principle remains unchanged: an appendage is a system of movably connected levers driven by muscles (Roberts, 2013, ch. 33).

4.2. Uniramous and Biramous Appendages

One of the most important features distinguishing major arthropod groups is the structure of their appendages. Two main types are distinguished (Miller, 2024, ch. 14; Schierwater, 2022, ch. 26; Roberts, 2013, ch. 33):

  • Biramous appendages. Such an appendage consists of a basal part — the protopodite, from which two branches extend: the outer exopodite and the inner endopodite. Biramous appendages are characteristic of crustaceans (Crustacea) and were typical of trilobites (Trilobita). In crustaceans, the two branches may perform different functions: for example, the endopodite serves for walking, while the exopodite serves for swimming or creating a water current. Additional outgrowths — epipodites — may also be located on the protopodite, often functioning as gills (Schierwater, 2022, ch. 26).
  • Uniramous appendages. Such an appendage consists of a single row of podomeres, without division into exo- and endopodite. Uniramous appendages are characteristic of insects (Hexapoda), myriapods (Myriapoda), and chelicerates (Chelicerata) (Miller, 2024, ch. 14; Schierwater, 2022, ch. 27, 28, 29). It is believed that uniramous appendages originated from biramous ancestral forms through reduction of one branch (Miller, 2024, ch. 14).

The difference between these types of appendages has important phylogenetic significance. For a long time, the presence of uniramous appendages in insects and myriapods served as a basis for uniting them into the group Uniramia. However, modern molecular data have shown that insects originated from crustacean ancestors, and their uniramous appendages are a secondary simplification (Regier et al., 2010; Schierwater, 2022, ch. 26).

4.3. Specialization of Appendages

One of the main advantages of jointed appendages is their ability to specialize. During evolution, arthropod appendages acquired many forms and functions, allowing them to colonize a variety of ecological niches. Let us consider the main types of specialization (Miller, 2024, ch. 14, 15; Pedigo, 2002, ch. 2; Schierwater, 2022, ch. 26–29).

Walking appendages. This is the most common type of appendage, intended for moving along a substrate. Walking legs may be relatively simple, as in many insects, or specialized for running, as in ground beetles (Carabidae), or for climbing, as in many arboreal insects. In arachnids, walking legs often bear numerous sensory bristles, compensating for the absence of antennae (Schierwater, 2022, ch. 28).

Swimming appendages. In aquatic arthropods, especially crustaceans, appendages are often modified for swimming. They may have broad, flattened podomeres covered with setae, which increase surface area and create thrust during the stroke (Schierwater, 2022, ch. 26). For example, swimming legs (pleopods) in shrimp and other higher crustaceans are located on the abdomen and provide movement in water. In copepods (Copepoda), the antennules and thoracic legs work as oars, which gave the group its name (Schierwater, 2022, ch. 26).

Jumping appendages. In some insects, for example, grasshoppers, locusts, and fleas, the hind appendages are modified for jumping. They usually have thickened femora containing powerful muscles and elongated tibiae. In fleas (Siphonaptera), jumping appendages allow them to cover distances hundreds of times greater than body length (Miller, 2024, ch. 15; McGavin, 2022, ch. 1). Some crustaceans, for example, amphipods (Amphipoda), also have jumping appendages (Schierwater, 2022, ch. 26).

Digging appendages. In burrowing animals, such as mole crickets (Gryllotalpidae) and some beetles, the forelimbs are modified for digging. They are usually short and massive, with expanded podomeres and teeth resembling a scoop (Pedigo, 2002, ch. 2). In crustaceans, for example, in fiddler crabs (Uca), one claw may be enlarged and used for digging or attracting females (Schierwater, 2022, ch. 26).

Grasping appendages. Grasping appendages are intended for capturing and holding prey. In arachnids, this function is performed by pedipalps, which may be pincer-like, as in scorpions, or whip-like, as in solifuges (Schierwater, 2022, ch. 28). In crustaceans, grasping appendages are claws (chelipeds), which can be very large and powerful, as in crabs and lobsters (Schierwater, 2022, ch. 26). In insects, grasping appendages are characteristic of mantises (Mantodea), whose forelegs are armed with spines for holding prey (Miller, 2024, ch. 15).

Mouth appendages. Appendages located around the mouth are modified for food intake. In crustaceans, these are mandibles, maxillae, and maxillipedes (Schierwater, 2022, ch. 26). In insects, mouthparts are formed by modified head appendages: mandibles, maxillae, and labium (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1). The diversity of mouthparts in insects is enormous: chewing, piercing-sucking, lapping, siphoning, and other types. We will examine them in detail in the next section.

Sensory appendages. Some appendages are modified for perceiving information from the environment. In crustaceans, these are antennae and antennules, bearing numerous chemoreceptors and mechanoreceptors (Schierwater, 2022, ch. 26). In insects, antennae are also sensory appendages, often with very complex structure (Pedigo, 2002, ch. 2). In arachnids, which lack antennae, the sensory function is performed by elongated anterior appendages, for example, in whip scorpions (Uropygi) and solifuges (Solifugae) (Schierwater, 2022, ch. 28).

Reproductive appendages. In many arthropods, appendages are modified for transferring sperm or laying eggs. In male crustaceans, the first two pairs of abdominal legs are transformed into copulatory organs (gonopods) (Schierwater, 2022, ch. 26). In male spiders, pedipalps are modified into copulatory organs (Schierwater, 2022, ch. 28). In insects, the ovipositor is often formed by modified appendages of abdominal segments (Pedigo, 2002, ch. 2).

4.4. Why Jointed Appendages Are a Key Factor of Evolutionary Success

Jointed appendages played a decisive role in the evolutionary success of arthropods. What are their advantages? (Miller, 2024, ch. 14; Hickman, 2004, ch. 18)

1. Multifunctionality. The same appendage can perform different functions depending on lifestyle. For example, the forelimbs of insects can be walking, grasping, digging, or mouth appendages. This allows arthropods to adapt to a variety of conditions.

2. Precision of movements. Joints between podomeres allow very precise and coordinated movements. This is especially important for predators that need to seize prey and for herbivorous animals that need to bite and grind food.

3. Speed. Jointed appendages are capable of very fast movements, allowing arthropods to escape predators or seize prey. For example, fleas can jump distances hundreds of times greater than their body length.

4. Specialization. Different appendages can specialize in performing different tasks, increasing the efficiency of the whole organism. For example, in crustaceans some appendages are used for swimming, others for walking, others for filtering, and still others for capturing food.

5. Adaptive radiation. The diversity of appendages opened the way for arthropods to colonize a variety of ecological niches. It was appendages that allowed them to become the dominant group of animals on Earth.

4.5. Why Appendages Are Homologous Structures

From a morphological point of view, all arthropod appendages are homologous structures. This means that they have a common origin despite external differences (Miller, 2024, ch. 14; Roberts, 2013, ch. 33).

The homology of appendages is confirmed by several facts:

1. A single structural plan. All appendages, regardless of function, consist of podomeres and joints. Even strongly modified appendages, for example, mouthparts, retain features of the original plan.

2. Embryological development. During embryogenesis, all appendages are laid down as paired outgrowths of body segments, which indicates their common origin (Roberts, 2013, ch. 33).

3. Genetic control. Appendage development is controlled by the same genes (for example, Distal-less, dachshund) in different arthropod groups (Schierwater, 2022, ch. 28).

4. Fossil forms. Fossil arthropods, such as trilobites, demonstrate a series of transitional appendage forms, confirming their common origin.

The doctrine of appendage homology is important not only for understanding arthropod evolution but also for systematics. For example, the homology of arachnid chelicerae and insect antennae was established on the basis of embryological and genetic data, which helped refine the phylogeny of these groups (Schierwater, 2022, ch. 28).

5. Body Cavity and Internal Structure

We have already examined in detail the external structures of arthropods — exoskeleton, segmentation, tagmosis, and appendages. Now we need to look inside the body and understand how their internal space is organized. It turns out that here too arthropods demonstrate unique solutions that largely explain their evolutionary success (Miller, 2024, ch. 14; Hickman, 2004, ch. 18).

5.1. Mixocoel: The Mixed Body Cavity

In most multicellular animals that we studied earlier (annelids, mollusks), the body cavity is represented by the coelom — a secondary cavity lined with mesodermal epithelium. In roundworms (Nematoda) we encounter a pseudocoel — a primary cavity lacking such a lining. However, in arthropods the situation is fundamentally different (Miller, 2024, ch. 14; Roberts, 2013, ch. 33).

During the evolution of arthropod ancestors, the coelom underwent significant reduction. Its remnants are preserved only as small cavities around the gonads and sometimes excretory organs. The main space inside the body was occupied by the mixed body cavity, or mixocoel (from Greek mixis — mixing and koilos — cavity) (Miller, 2024, ch. 14; Hickman, 2004, ch. 18). The mixocoel is formed as a result of the fusion of coelom remnants with the primary body cavity — the blastocoel. Thus, the mixocoel is neither a true coelom nor a pseudocoel in the pure sense, but their combination.

This fundamental difference has a deep functional meaning. In annelids, the coelom serves as a hydrostatic skeleton supporting body shape and participating in locomotion. In arthropods, this function was taken over by the external skeleton, and the need for a hydrostatic compartment disappeared. This is why the coelom was reduced in them, and its place was taken by the mixocoel, which does not perform a supporting function but serves as a container for internal organs and circulating fluid (Roberts, 2013, ch. 33).

5.2. Haemocoel and Haemolymph

The space of the mixocoel in which internal organs are located is called the haemocoel (Miller, 2024, ch. 14; Schierwater, 2022, ch. 26). The haemocoel is filled with fluid — haemolymph, which performs the functions of blood and tissue fluid simultaneously (Miller, 2024, ch. 14; Pedigo, 2002, ch. 2).

Haemolymph is a watery fluid containing plasma and cellular elements — haemocytes (Roberts, 2013, ch. 33). Unlike vertebrate blood, haemolymph does not contain erythrocytes with haemoglobin (with rare exceptions, for example, in some mosquito larvae — chironomids). The respiratory function in most arthropods is performed not by haemolymph but by the tracheal system or gills, which deliver oxygen directly to tissues (Miller, 2024, ch. 14; Pedigo, 2002, ch. 2).

The functions of haemolymph are diverse (Miller, 2024, ch. 14; Roberts, 2013, ch. 33):

1. Transport of nutrients. Haemolymph carries nutrients from the intestine to tissues.

2. Transport of metabolic products. It delivers metabolic products to excretory organs.

3. Transport of hormones. Haemolymph carries hormones from endocrine glands to target organs.

4. Immune function. Haemocytes participate in phagocytosis of pathogens and in clotting processes.

5. Hydrostatic function. In some arthropods (for example, spiders), haemolymph creates pressure necessary for extending appendages and movement.

6. Thermoregulation. In some insects, haemolymph participates in heat transfer.

It is important to note that in insects haemolymph does not participate in oxygen transport — this function is fully taken over by the tracheal system. This is why insects can have a very high metabolic rate despite a relatively simply organized circulatory system (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1).

5.3. Internal Organs in the Haemocoel

All internal organs of arthropods are located in the haemocoel (Miller, 2024, ch. 14; Hickman, 2004, ch. 18):

  • Digestive system — a through tube passing through the entire body.
  • Excretory system — Malpighian tubules, coxal, antennal, or maxillary glands.
  • Circulatory system — heart and vessels.
  • Nervous system — brain and ventral nerve cord.
  • Reproductive system — gonads and ducts.
  • Fat body — a special tissue characteristic of insects.

All these organs are bathed in haemolymph, which ensures their interaction and metabolism. Such organization allows arthropods to have a compact body and effectively use internal space (Miller, 2024, ch. 14).

5.4. Fat Body in Insects

The fat body deserves special mention — a unique tissue characteristic of insects and some other arthropods (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1). The fat body is a loose tissue consisting of cells — trophocytes — which perform many functions:

1. Storage of nutrients. The fat body accumulates fats, glycogen, and proteins, which are used during starvation, metamorphosis, or overwintering.

2. Metabolism. Synthesis and breakdown of carbohydrates, lipids, and proteins occur in the fat body.

3. Synthesis of haemolymph proteins. The fat body synthesizes many proteins circulating in the haemolymph.

4. Detoxification. The fat body participates in neutralizing toxic substances, including insecticides.

5. Endocrine function. The fat body participates in the metabolism of ecdysteroids and juvenile hormone.

The fat body is analogous to the liver and adipose tissue of vertebrates but performs more diverse functions. It plays a key role in metamorphosis, providing energy and building materials for body remodeling processes (Pedigo, 2002, ch. 2).

5.5. Why the Mixocoel Differs from the Coelom and Pseudocoel

To better understand the uniqueness of the mixocoel, let us compare it with other types of body cavities (Miller, 2024, ch. 14; Hickman, 2004, ch. 18; Roberts, 2013, ch. 33).

FeatureCoelomPseudocoelMixocoel
OriginMesodermBlastocoelFusion of coelom and blastocoel
LiningMesodermal epitheliumAbsentAbsent or incomplete
FunctionHydrostatic skeleton, transportHydrostatic skeleton, transportTransport, container for organs
ExamplesAnnelids, mollusksRoundwormsArthropods

Thus, the mixocoel is a unique evolutionary acquisition of arthropods, which allowed them to abandon the hydrostatic skeleton in favor of an external one, while preserving internal space for organs and fluid circulation.

5.6. Why the Internal Structure of Arthropods Is Compact

The internal structure of arthropods is highly compact. This is achieved through several factors (Miller, 2024, ch. 14; Hickman, 2004, ch. 18):

1. Absence of septa. Unlike annelids, arthropods have no internal partitions between segments, allowing organs to be arranged more compactly.

2. Fusion of ganglia. The arthropod nervous system is characterized by concentration of ganglia, which reduces the space occupied.

3. Compact heart. The arthropod heart is usually a tube or compact organ that does not require much space.

4. Fat body. In insects, the fat body fills the free space between organs, performing the functions of storage tissue.

5. Malpighian tubules. These thin tubules are compactly arranged in the haemocoel, not occupying much space.

Such compactness allows arthropods to have small body sizes while retaining all necessary organs and systems. It is this combination — small size and high functionality — that is one of the key reasons for their evolutionary success (Miller, 2024, ch. 14).

6. Digestive System

We have already examined how the body cavity of arthropods is organized and where internal organs are located. Now let us consider one of the most important systems — the digestive system. It is this system that ensures the intake of energy and building materials necessary for growth, development, and reproduction. In arthropods, the digestive system demonstrates amazing diversity, closely related to their lifestyle and type of feeding (Miller, 2024, ch. 14; Pedigo, 2002, ch. 2).

6.1. Through Digestive Tube: General Plan

The arthropod digestive system is a through tube (alimentary canal) that passes through the entire body — from mouth to anus (Miller, 2024, ch. 14; Roberts, 2013, ch. 33). The presence of a through tube is an important evolutionary advantage: food moves in one direction, allowing the processes of digestion and absorption to be separated into different regions and making digestion more efficient.

Traditionally, the arthropod digestive tube is divided into three main regions (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1; Roberts, 2013, ch. 33):

1. Foregut (stomodaeum). This is an ectodermal region lined with cuticle. It begins with the mouth opening and includes the pharynx, oesophagus, crop, and, in some groups, the proventriculus (gizzard). Functions of the foregut: food intake, storage, mechanical grinding, and transport to the midgut. Since the foregut is lined with cuticle, its lining is also shed during molting, and the animal cannot feed during molting (Pedigo, 2002, ch. 2).

2. Midgut (mesenteron). This is an endodermal region without a cuticular lining. It is here that the main digestion and absorption of nutrients occurs (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1). In many arthropods, the midgut forms blind outgrowths — gastric caeca — which increase the surface area for digestion and absorption. In arachnids and some other groups, the midgut has paired glandular outgrowths — hepatic caeca — performing the functions of a digestive gland (Roberts, 2013, ch. 33).

3. Hindgut (proctodaeum). This is also an ectodermal region lined with cuticle. It includes the intestine and rectum. The main function of the hindgut is absorption of water and salts from undigested food residues, as well as formation and excretion of feces. In some arthropods (for example, arachnids), Malpighian tubules — excretory organs — open into the hindgut (Roberts, 2013, ch. 33).

Between the regions are valves (sphincters) regulating food movement: the cardiac valve between foregut and midgut and the pyloric valve between midgut and hindgut (Pedigo, 2002, ch. 2).

6.2. Mouthparts: Diversity Linked to Feeding

One of the most impressive features of arthropods is the diversity of their mouthparts. The mouthparts are a complex of modified appendages and other structures surrounding the mouth and adapted for taking in a certain type of food (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1). It is the structure of the mouthparts that largely determines what and how the animal feeds, and is a key feature for identifying arthropods.

In arthropods, several main types of mouthparts are distinguished (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1; Miller, 2024, ch. 15).

Chewing mouthparts. This is the most primitive type, characteristic of insects with complete metamorphosis (for example, grasshoppers, beetles, butterfly caterpillars) and many other groups (Pedigo, 2002, ch. 2). It consists of the following structures:

  • Labrum — the upper lip, not an appendage but an outgrowth of the head capsule.
  • Mandibles — a pair of powerful jaws intended for biting and grinding solid food.
  • Maxillae — a pair of second jaws, which hold food, direct it into the mouth, and bear sensory palps.
  • Labium — the lower lip, formed by fusion of a pair of appendages, covering the mouth from below.
  • Hypopharynx — a tongue-like structure, not an appendage, on which salivary gland ducts open.

Chewing mouthparts allow grinding solid food — leaves, stems, wood, chitin of other insects. This is the most common type of mouthparts in phytophages and predators.

Piercing-sucking mouthparts. This type is characteristic of insects feeding on liquid food — plant sap or animal blood. It is a long proboscis formed by modified mandibles and maxillae, which are transformed into thin stylets (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1). In mosquitoes (Diptera: Culicidae), the proboscis consists of six stylets surrounded by a protective sheath — the labium. During feeding, the stylets pierce the host's skin, and through one canal blood is sucked up, while through another saliva with anticoagulants is injected (Pedigo, 2002, ch. 2). In aphids, leafhoppers, and bugs (Hemiptera), the piercing-sucking apparatus is adapted for piercing plant tissues and sucking out sap. It is this type of mouthparts that makes many arthropods vectors of pathogens of plant and animal diseases (Pedigo, 2002, ch. 2; Roberts, 2013, ch. 33).

Lapping (sponging) mouthparts. Characteristic of house flies and their relatives (Diptera). Their mandibles and maxillae are reduced, and the labium forms a soft proboscis expanded at the end with labella — spongy pads capable of sucking liquid food through capillaries (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1). If the food is solid, the fly secretes saliva, which dissolves it, and then sucks up the resulting solution. In horseflies (Tabanidae), the mouthparts are cutting-lapping: mandibles and maxillae form sharp blades with which they cut the skin, and then lap up blood (Pedigo, 2002, ch. 2).

Siphoning mouthparts. Characteristic of butterflies and moths (Lepidoptera). Their mandibles are reduced, and the maxillae form a long, spirally coiled proboscis, intended for sucking nectar from flowers (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1). At rest, the proboscis is coiled into a spiral; during feeding, it unfolds and is inserted into the flower. Liquid is sucked up by the action of a pharyngeal pump.

Lapping-chewing mouthparts. Characteristic of bees and wasps (Hymenoptera). The mandibles retain the ability to chew (used for building nests, collecting wax, or capturing prey), while the maxillae and labium form a proboscis for sucking nectar (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1).

6.3. Salivary Glands

Salivary glands are an important component of the arthropod digestive system (Pedigo, 2002, ch. 2; Roberts, 2013, ch. 33). They are paired glands whose ducts open into the oral cavity, most often on the hypopharynx. The functions of salivary glands are diverse:

1. Moistening food. Saliva facilitates swallowing of solid food.

2. Beginning of digestion. Saliva contains enzymes (amylase, lipase, proteases) that begin the breakdown of carbohydrates, fats, and proteins already in the oral cavity.

3. Anticoagulants. In blood-sucking arthropods (mosquitoes, ticks, horseflies), saliva contains substances that prevent blood clotting (Roberts, 2013, ch. 33).

4. Pharmacologically active substances. The saliva of some arthropods contains toxins, analgesics, and vasodilators that facilitate feeding and suppress the host's defense reactions (Roberts, 2013, ch. 33).

5. Building material. In caddisfly larvae (Trichoptera) and some other insects, salivary glands secrete silk for building cases or catching nets (Pedigo, 2002, ch. 2).

6.4. Liver (Hepatopancreas) in Crustaceans

In crustaceans, the digestive system has a number of features. The foregut often forms a gastric mill, in which food is ground with the help of chitinous teeth and calcareous concretions (Schierwater, 2022, ch. 26; Hickman, 2004, ch. 18). The midgut in many crustaceans forms large paired outgrowths — the hepatopancreas, which performs the functions of both liver and pancreas (Schierwater, 2022, ch. 26; Hickman, 2004, ch. 18).

The crustacean hepatopancreas is a large organ consisting of many blind tubules in which the following processes occur (Schierwater, 2022, ch. 26; Hickman, 2004, ch. 18):

1. Secretion of digestive enzymes. The hepatopancreas secretes enzymes that break down proteins, fats, and carbohydrates.

2. Absorption of nutrients. Absorption of digestion products occurs in the epithelium of the tubules.

3. Intracellular digestion. Some hepatopancreas cells phagocytose food particles and digest them intracellularly.

4. Storage of nutrients. The hepatopancreas can accumulate fats and glycogen.

In some crustaceans, for example, in daphnia, the hepatopancreas is poorly developed, and the midgut is long and performs the main digestive functions. In crayfish, on the contrary, the hepatopancreas is strongly developed, and the midgut is short (Schierwater, 2022, ch. 26).

6.5. Why the Diversity of Mouthparts Is Linked to the Diversity of Feeding

The diversity of arthropod mouthparts is a direct reflection of their feeding specialization (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1). During evolution, different arthropod groups adapted to different food sources, and their mouthparts underwent corresponding changes.

  • Phytophagy. Herbivorous arthropods (caterpillars, leaf beetles, aphids) have either chewing mouthparts for grinding plant tissues or piercing-sucking mouthparts for sucking sap from plant vessels.
  • Zoophagy. Predatory arthropods (mantises, spiders, ground beetles) have grasping appendages and chewing mouthparts for tearing prey. Some (predatory bugs) use piercing-sucking mouthparts to suck out the contents of the prey's body.
  • Parasitism. Blood-sucking arthropods (mosquitoes, ticks, lice, fleas) have piercing-sucking mouthparts adapted for piercing skin and sucking blood.
  • Nectarophagy. Butterflies and bees feed on nectar, for which they have formed siphoning or lapping-chewing mouthparts.
  • Detritivory. Arthropods feeding on decomposing organic remains (woodlice, millipedes, fly larvae) have chewing or lapping mouthparts.

Thus, the diversity of mouthparts is a key adaptation that allowed arthropods to master almost all possible food sources and occupy all ecological niches (Pedigo, 2002, ch. 2; Miller, 2024, ch. 15).

6.6. Why the Arthropod Digestive System Is Efficient

The arthropod digestive system is highly efficient, ensuring their rapid growth, high fecundity, and ability to exploit diverse food resources (Miller, 2024, ch. 14; Pedigo, 2002, ch. 2). What are its advantages?

1. Through tube. The presence of a through digestive tract allows the processes of digestion and absorption to be separated into different regions, increasing the efficiency of food processing.

2. Specialization of regions. Each region of the digestive system performs its own function: foregut — intake and grinding of food, midgut — digestion and absorption, hindgut — water absorption and formation of feces.

3. High speed of digestion. In many arthropods, digestion occurs very quickly. For example, in aphids plant sap passes through the digestive system in a few minutes, allowing them to consume large amounts of low-calorie food (Pedigo, 2002, ch. 2).

4. Symbionts. Many arthropods feeding on difficult-to-digest food (wood, plant sap) have symbiotic microorganisms in the intestine that help break down cellulose and synthesize missing nutrients (McGavin, 2022, ch. 1; Schierwater, 2022, ch. 27).

5. Efficient absorption. The presence of gastric caeca and microvilli on the midgut epithelium significantly increases the absorption area.

6. Epithelial regeneration. The midgut epithelium is capable of rapid regeneration, allowing arthropods to recover quickly after damage.

7. Respiratory System

We have already examined how the arthropod digestive system is organized and how they obtain and process food. Now let us consider an equally important system — the respiratory system. It is this system that ensures the intake of oxygen necessary for releasing energy from nutrients and the removal of carbon dioxide — the end product of metabolism. In arthropods, the respiratory system demonstrates amazing diversity, reflecting their adaptation to aquatic and terrestrial habitats (Miller, 2024, ch. 14; Hickman, 2004, ch. 18).

7.1. General Principles of Gas Exchange in Arthropods

All animals need oxygen for aerobic respiration — a process in which energy stored in nutrients is released and used for cell activity (Miller, 2024, ch. 14; Roberts, 2013, ch. 33). In small animals with a large relative body surface area, gas exchange can occur by simple diffusion through the integument. However, in most arthropods, which lead an active lifestyle, diffusion is insufficient, and specialized respiratory organs have formed.

In arthropods, several types of respiratory systems are distinguished, which can be divided into two large groups: aquatic (gills) and air (tracheae, book lungs, tracheal gills) (Miller, 2024, ch. 14; Hickman, 2004, ch. 18). The choice of respiratory system type is determined by habitat and lifestyle.

7.2. Gills (Crustaceans, Aquatic Chelicerates)

Gills are respiratory organs adapted for extracting oxygen from water (Miller, 2024, ch. 14; Schierwater, 2022, ch. 26). In arthropods, gills are usually thin-walled, richly vascularized outgrowths of the integument through which gases diffuse between water and haemolymph.

In crustaceans, gills are most often located on thoracic appendages or on the body walls in gill cavities under the carapace (Schierwater, 2022, ch. 26; Hickman, 2004, ch. 18). Each gill consists of a central axis and many thin leaflets or filaments, which significantly increases the surface area for gas exchange. Water flow through the gills is provided by movement of appendages or by special structures, for example, the scaphognathite — a modified exopodite of the second maxilla, which works like a scoop, driving water through the gill cavity (Schierwater, 2022, ch. 26).

In aquatic chelicerates, for example, horseshoe crabs (Xiphosura), the respiratory organs are book gills, located on abdominal segments (Schierwater, 2022, ch. 28; Hickman, 2004, ch. 18). They are flattened leaf-like structures resembling book pages, hence the name. Gas exchange between water and haemolymph occurs through their thin walls.

Gills are effective in the aquatic environment because water contains dissolved oxygen, although its concentration is significantly lower than in air. However, gills cannot function on land, since their thin leaflets stick together and dry out, making gas exchange impossible. This is why the emergence of arthropods onto land required the formation of fundamentally different respiratory organs.

7.3. Tracheae (Insects, Myriapods, Some Arachnids)

Tracheae are a unique respiratory system characteristic of insects, myriapods, and some arachnids (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1; Schierwater, 2022, ch. 27, 29). The tracheal system is a network of branching air-bearing tubules that deliver oxygen directly to body cells, bypassing the circulatory system. This fundamentally distinguishes the tracheal system from gills and lungs, where gas exchange occurs through blood or haemolymph.

Structure of the tracheal system (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1; Miller, 2024, ch. 15):

1. Spiracles. These are openings on the lateral surface of the body through which air enters the tracheal system. The number of spiracles varies: in insects usually 10 pairs (2 pairs on the thorax and 8 pairs on the abdomen), but there may be fewer. Spiracles are often equipped with valves and filtering structures that regulate air intake and prevent moisture loss (Pedigo, 2002, ch. 2).

2. Tracheal trunks. Large tracheae extend from the spiracles and branch into smaller tubules. The walls of tracheae are lined with cuticle and reinforced with spiral thickenings — taenidia — which prevent the tubules from collapsing (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1).

3. Tracheoles. These are the thinnest terminal branches of the tracheal system, less than 1 µm in diameter. Tracheoles penetrate into cells or closely adjoin them, providing direct gas exchange between air and the cell (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1). It is at the level of tracheoles that oxygen diffuses into cells and carbon dioxide out of cells.

4. Air sacs. In many actively flying insects (for example, bees, flies), tracheae form expansions — air sacs. They lack taenidia and can collapse and expand, providing additional ventilation of the tracheal system (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1).

Ventilation of the tracheal system. In small insects, gas exchange can occur primarily by diffusion. However, in large and active forms (for example, flying insects), diffusion is insufficient, and active ventilation is used — rhythmic movements of the abdomen that compress and expand air sacs, driving air through the tracheae (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1). In some insects, continuous gas exchange is observed (spiracles always open), in others — discontinuous gas exchange (spiracles open periodically), which allows water to be conserved (McGavin, 2022, ch. 1).

Advantages of the tracheal system (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1):

1. Direct oxygen delivery. Oxygen is delivered directly to cells, bypassing the circulatory system. This makes gas exchange very efficient.

2. Independence from the circulatory system. The tracheal system does not depend on haemolymph, which in insects does not transport oxygen.

3. High metabolic intensity. The tracheal system allows insects to maintain a very high metabolic rate necessary for flight.

4. Water economy. Valves on spiracles and discontinuous gas exchange allow insects to minimize moisture loss.

Limitations of the tracheal system (McGavin, 2022, ch. 1; Miller, 2024, ch. 14):

1. Limitation of body size. Diffusion is effective only over short distances. Since tracheoles must be no farther than 2–3 µm from a cell, the tracheal system cannot service a very large body. This is why insects do not reach large sizes (McGavin, 2022, ch. 1).

2. Dependence on humidity. The tracheal system is open to air, creating a risk of moisture loss. Insects are forced to conserve water, which limits their activity in dry conditions.

7.4. Book Lungs (Arachnids)

Book lungs are respiratory organs characteristic of arachnids (Schierwater, 2022, ch. 28; Hickman, 2004, ch. 18). They are paired invaginations of the abdominal wall, inside which are numerous thin leaf-like plates — lamellae, resembling book pages. Air circulates between the lamellae, and haemolymph inside the lamellae. Gas exchange occurs through the thin walls of the lamellae (Schierwater, 2022, ch. 28).

Structure of a book lung (Schierwater, 2022, ch. 28; Hickman, 2004, ch. 18):

  • Spiracle — a slit-like opening on the ventral side through which air enters the book lung.
  • Atrium — a cavity into which the spiracle opens.
  • Lamellae — thin leaf-like plates between which air circulates.
  • Haemolymph circulates inside the lamellae, ensuring gas exchange.

In different arachnid groups, the number of book lungs varies: in scorpions — four pairs, in most spiders — one or two pairs (Schierwater, 2022, ch. 28). In some spiders (for example, two-lunged spiders), there is one pair of lungs and one pair of tracheae, while in four-lunged spiders there are only lungs (Schierwater, 2022, ch. 28).

Advantages of book lungs (Schierwater, 2022, ch. 28; Hickman, 2004, ch. 18):

1. Efficient gas exchange in air. Lamellae create a large surface area for diffusion of gases between air and haemolymph.

2. Protection from desiccation. Book lungs are located inside the body, which reduces moisture loss compared with tracheae.

3. Capacity for ventilation. In some arachnids (for example, scorpions), muscles provide active ventilation of book lungs.

Limitations of book lungs. Book lungs are less efficient than tracheae in delivering oxygen directly to tissues. They require a developed circulatory system to transport oxygen from the lungs to tissues. This is why arachnids with book lungs usually have larger body sizes than insects with tracheae (Schierwater, 2022, ch. 28; Hickman, 2004, ch. 18).

7.5. Tracheal Gills (Aquatic Insect Larvae)

Tracheal gills are respiratory organs characteristic of aquatic larvae of some insects (mayflies, stoneflies, dragonflies, caddisflies) (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1). They are thin-walled body outgrowths containing tracheae. Gas exchange occurs through the thin integument of the gills between water and tracheae (Pedigo, 2002, ch. 2).

In mayfly larvae (Ephemeroptera), tracheal gills are located on the sides of the abdomen and have the form of leaf-like plates. In stonefly larvae (Plecoptera), gills may be in the form of tufts of filaments. In dragonfly larvae (Odonata), gills are located in the rectum — these are rectal gills, through which water is pumped by muscles (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1).

7.6. Why Tracheae Are Effective for Small Terrestrial Animals

The tracheal system is especially effective for small terrestrial arthropods for several reasons (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1):

1. Direct oxygen delivery. Oxygen is delivered directly to cells, eliminating the need for a developed circulatory system for gas transport.

2. High diffusion rate. Oxygen diffusion in air occurs 10,000 times faster than in water, making the tracheal system very efficient.

3. Short distances. In small animals, distances between spiracles and cells are small, allowing diffusion to provide sufficient gas exchange.

4. Water economy. Valves on spiracles and discontinuous gas exchange allow moisture loss to be minimized.

7.7. Why Book Lungs Are Effective for Arachnids

Book lungs are effective for arachnids for the following reasons (Schierwater, 2022, ch. 28; Hickman, 2004, ch. 18):

1. Large surface area. Lamellae create a large area for gas exchange in a compact volume.

2. Protection from desiccation. Book lungs are located inside the body, reducing moisture loss.

3. Capacity for ventilation. In some arachnids, muscles provide active ventilation of book lungs.

4. Compatibility with larger body sizes. Book lungs allow arachnids to reach larger sizes than insects with tracheae.

7.8. Why Arthropods Do Not Reach Large Sizes

The limitation of arthropod body size is the result of a complex of causes, the most important of which is the respiratory system (McGavin, 2022, ch. 1; Miller, 2024, ch. 14).

1. Limitations of the tracheal system. Diffusion is effective only over short distances. Since tracheoles must be no farther than 2–3 µm from a cell, the tracheal system cannot service a very large body. Even in large insects (for example, giant stick insects), the body has an elongated shape to reduce the distance from spiracles to internal organs (McGavin, 2022, ch. 1).

2. Limitations of the exoskeleton. The exoskeleton becomes relatively heavier with increasing size, which limits maximum body mass. In addition, molting of a large animal involves great risk (Miller, 2024, ch. 14).

3. Metabolic limitations. Large active animals require very efficient respiratory and circulatory systems. The tracheal system cannot provide sufficient gas exchange for a large endothermic animal.

4. Ecological factors. In past geological epochs (for example, in the Carboniferous), larger insects existed (for example, dragonflies with a wingspan of up to 75 cm). This is associated with a higher oxygen content in the atmosphere (up to 35% versus the modern 21%) (McGavin, 2022, ch. 1). However, the appearance of active vertebrate predators probably contributed to the decrease in insect size (McGavin, 2022, ch. 1).

8. Circulatory System

We have already examined how the arthropod respiratory system is organized and how oxygen is delivered to tissues. Now let us consider the circulatory system. In arthropods, it is fundamentally different from the closed circulatory system of annelids and vertebrates. It is an open, or lacunar, system, closely connected with the mixocoel and haemolymph (Miller, 2024, ch. 14; Hickman, 2004, ch. 18).

8.1. Open Circulatory System

Unlike a closed system, where blood circulates only through vessels, in arthropods haemolymph pours out of vessels into a system of cavities — sinuses and lacunae, which are part of the mixocoel (Miller, 2024, ch. 14; Roberts, 2013, ch. 33). Thus, haemolymph directly bathes internal organs and then collects back to the heart.

Scheme of haemolymph circulation (Miller, 2024, ch. 14; Pedigo, 2002, ch. 2; Schierwater, 2022, ch. 26):

1. Heart — the main pumping organ, located on the dorsal side of the body in the pericardial sinus.

2. Haemolymph enters the heart through ostia — paired openings with valves that open when the heart relaxes (diastole).

3. When the heart contracts (systole), the ostial valves close, and haemolymph is pushed into arteries, which extend from the heart forward and backward.

4. Arteries open into the haemocoel — a system of sinuses and lacunae, where haemolymph bathes organs and tissues.

5. From the haemocoel, haemolymph gradually collects into the pericardial sinus and returns to the heart through the ostia.

It is important to note that the movement of haemolymph in the open system is ensured not only by the heart but also by movements of the body, muscles, and internal organs (Pedigo, 2002, ch. 2; Schierwater, 2022, ch. 26). This is especially characteristic of insects, in which the heart often works in a pulsating mode, and haemolymph moves due to abdominal movements.

8.2. Heart: Tubular and Chambered

The arthropod heart is a tubular organ located dorsally along the body (Miller, 2024, ch. 14; Hickman, 2004, ch. 18). In different groups it has different structure:

  • In crustaceans, the heart is usually compact, chambered (with several ostia), located in the thoracic or abdominal region depending on the localization of gills (Schierwater, 2022, ch. 26; Hickman, 2004, ch. 18). In some primitive forms (for example, branchiopods), the heart is long, multichambered, with paired ostia in each chamber.
  • In insects, the heart is also tubular, but often consists of several chambers separated by valves. It runs along the dorsal side of the abdomen and thorax. In some insects, the heart may be reduced or absent (for example, in Strepsiptera) (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1).
  • In arachnids, the heart is tubular, with several pairs of ostia, located in the abdomen (Schierwater, 2022, ch. 28).

The heart is surrounded by the pericardial sinus — a region of the mixocoel separated by the dorsal diaphragm — a membrane supported by alary muscles (Pedigo, 2002, ch. 2; Schierwater, 2022, ch. 26). These muscles help hold the heart and promote its filling.

8.3. Haemolymph

Haemolymph is the fluid circulating in the open circulatory system of arthropods (Miller, 2024, ch. 14; Pedigo, 2002, ch. 2). We briefly touched on it in the section on the body cavity, but now let us examine it in more detail.

Composition of haemolymph (Roberts, 2013, ch. 33; Schierwater, 2022, ch. 26):

  • Plasma — a watery fluid containing dissolved nutrients (amino acids, sugars, lipids), hormones, metabolic products, salts, and proteins.
  • Haemocytes — cellular elements, making up about 10% of haemolymph volume. They perform diverse functions: phagocytosis, encapsulation, clotting, transport of nutrients.

Functions of haemolymph (Miller, 2024, ch. 14; Pedigo, 2002, ch. 2; Roberts, 2013, ch. 33):

1. Transport of nutrients. Haemolymph carries nutrients from the intestine to tissues.

2. Transport of metabolic products. It delivers metabolic products to excretory organs (Malpighian tubules, coxal glands).

3. Transport of hormones. Haemolymph carries hormones from endocrine glands to target organs.

4. Immune function. Haemocytes participate in phagocytosis of pathogens and in clotting processes.

5. Hydrostatic function. In some arthropods (for example, spiders), haemolymph creates pressure necessary for extending appendages and movement.

6. Thermoregulation. In some insects, haemolymph participates in heat transfer.

7. Water reserve. Haemolymph serves as a reservoir of water and salts.

It is important to note that in insects haemolymph does not participate in oxygen transport — this function is fully taken over by the tracheal system (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1). This is why insects can have a very high metabolic rate despite a relatively simply organized circulatory system.

8.4. Haemocytes

Haemocytes are cells circulating in haemolymph (Roberts, 2013, ch. 33; Schierwater, 2022, ch. 26). In different arthropod groups, several types of haemocytes are distinguished, performing different functions:

1. Prohaemocytes — immature cells from which other types of haemocytes are formed.

2. Plasmatocytes — the most numerous type. Participate in phagocytosis, clotting, and transport of nutrients.

3. Granulocytes — contain granules with enzymes and cytotoxic substances. Participate in the immune response.

4. Spherulocytes — contain large inclusions. Participate in storage of nutrients and detoxification.

5. Oenocytoids — large cells participating in melanogenesis (melanin synthesis) and encapsulation.

Haemocytes play a key role in the immune defense of arthropods. They are able to recognize foreign bodies (bacteria, fungi, parasites) and respond to them by phagocytosis or encapsulation (Roberts, 2013, ch. 33).

8.5. Respiratory Pigments (Haemocyanin)

Although the haemolymph of most arthropods does not participate in oxygen transport, in some groups respiratory pigments that bind oxygen are present in the haemolymph (Miller, 2024, ch. 14; Schierwater, 2022, ch. 26; Roberts, 2013, ch. 33).

  • Haemocyanin — a copper-containing protein that gives haemolymph a bluish tint. It is characteristic of crustaceans and some arachnids (for example, horseshoe crabs). Haemocyanin is dissolved in plasma and binds oxygen, transporting it from gills or lungs to tissues (Schierwater, 2022, ch. 26).
  • Haemoglobin — an iron-containing protein, found in some arthropods, for example, in larvae of biting midges (Chironomidae), which live in conditions of oxygen deficiency. It may be dissolved in plasma or located in haemocytes (Pedigo, 2002, ch. 2).

In insects, respiratory pigments in haemolymph are usually absent, since oxygen is delivered by tracheae directly to tissues.

8.6. Why the Open System Is Effective for Arthropods

The open circulatory system may seem less perfect than the closed one, but for arthropods it is effective for a number of reasons (Miller, 2024, ch. 14; Hickman, 2004, ch. 18):

1. Low energy costs. The open system requires less energy to maintain pressure and move fluid than the closed system.

2. No need for high pressure. Since in most arthropods gas exchange occurs through tracheae or gills, haemolymph does not need to transport oxygen at high speed. Pressure in the system can be low.

3. Efficient distribution of nutrients. Haemolymph directly bathes organs, ensuring rapid exchange of nutrients and metabolic products.

4. Compactness. The open system does not require a branching network of capillaries, saving space inside the body.

5. Connection with the mixocoel. The haemocoel and haemolymph perform the functions of both the circulatory and lymphatic systems, simplifying the organization of internal space.

8.7. Why Haemolymph Performs the Functions of Blood and Tissue Fluid

In arthropods, haemolymph performs functions that in vertebrates are divided between blood and tissue fluid (Miller, 2024, ch. 14; Roberts, 2013, ch. 33). This is due to the features of the open circulatory system:

1. Direct contact with tissues. Since haemolymph pours into the haemocoel, it directly bathes cells and tissues, performing the function of tissue fluid.

2. Transport function. Haemolymph carries nutrients, hormones, and metabolic products, performing the function of blood.

3. Immune function. Haemocytes circulate in haemolymph and perform protective functions analogous to those of blood leukocytes.

4. Absence of separation into plasma and interstitial fluid. Unlike vertebrates, in which blood and tissue fluid are separated by capillary walls, in arthropods haemolymph directly contacts tissues, making it a universal fluid.

9. Excretory and Nervous Systems

We have already examined the digestive, respiratory, and circulatory systems of arthropods. Now let us consider two systems that ensure the removal of metabolic products and the coordination of all vital processes — the excretory and nervous systems. These systems are closely related to the lifestyle of arthropods and largely determine their behavior and ecological strategies (Miller, 2024, ch. 14; Hickman, 2004, ch. 18).

9.1. Excretory System: General Principles

Excretion is the process of removing metabolic products from the body, primarily nitrogenous compounds formed during the breakdown of proteins and nucleic acids (Miller, 2024, ch. 14; Roberts, 2013, ch. 33). In arthropods, the excretory system also plays a key role in osmoregulation — maintaining water-salt balance. Since arthropods have colonized a variety of environments — from fresh waters to arid deserts — their excretory organs demonstrate amazing diversity of adaptations.

Main types of excretory organs in arthropods (Miller, 2024, ch. 14; Roberts, 2013, ch. 33; Schierwater, 2022, ch. 26, 28):

1. Malpighian tubules (Malpighian tubules) — characteristic of insects, myriapods, and arachnids.

2. Coxal glands — characteristic of arachnids.

3. Antennal glands, or green glands — characteristic of crustaceans.

4. Maxillary glands — also characteristic of crustaceans.

9.2. Malpighian Tubules (Insects, Arachnids)

Malpighian tubules are thin tubules, blind at the distal end, which open into the digestive tract at the border of the midgut and hindgut (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1; Roberts, 2013, ch. 33). They are the main excretory organ in insects, myriapods, and arachnids.

Structure and principle of operation (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1; Roberts, 2013, ch. 33):

1. Location. Malpighian tubules lie freely in the haemocoel, bathed in haemolymph. Their number varies from 2 (in some scale insects) to 200 or more (in bees) (Pedigo, 2002, ch. 2).

2. Filtration. Ions (primarily potassium) are actively transported from haemolymph into the lumen of Malpighian tubules, and water passively follows. Metabolic products, including uric acid and its salts (urates), also enter the tubules.

3. Formation of urine. Primary urine, isotonic to haemolymph, is formed in the lumen of the tubule.

4. Reabsorption. As urine moves through the tubules and then into the hindgut, water and ions are reabsorbed. In insects living in arid conditions, reabsorption is so effective that feces are excreted almost dry (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1).

5. Excretion. Uric acid is excreted in the form of crystals or paste together with undigested food residues through the anus.

Advantages of Malpighian tubules (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1):

  • Water economy. The ability to reabsorb water in the hindgut allows insects to excrete almost dry feces, which is critically important for life on land.
  • Independence from the coelom. Malpighian tubules work directly with haemolymph, making them effective under conditions of an open circulatory system.
  • Compactness. Thin tubules occupy little space in the haemocoel.

In arachnids, Malpighian tubules are also present, but they open into the hindgut and excrete guanine — a nitrogenous waste product characteristic of arachnids (Roberts, 2013, ch. 33; Schierwater, 2022, ch. 28).

9.3. Coxal Glands (Arachnids)

Coxal glands are paired excretory organs characteristic of arachnids (Schierwater, 2022, ch. 28; Roberts, 2013, ch. 33). They are modified coelomoducts — tubules opening to the outside at the base of appendages (usually the third or fifth pair of walking legs). Hence the name: "coxa" — the basal podomere of the leg.

Structure and function (Schierwater, 2022, ch. 28; Roberts, 2013, ch. 33):

1. Mesodermal sac. The blind end of the gland is represented by a sac of coelomic origin.

2. Coiled canal. A coiled excretory canal extends from the sac.

3. Excretory duct. The canal opens to the outside through an excretory pore at the base of the appendage.

4. Filtration. Fluid from the haemocoel is filtered into the sac, where water and ions are reabsorbed. Metabolic products (guanine, uric acid) are concentrated and excreted.

In most adult arachnids, coxal glands function alongside Malpighian tubules, but in some groups (for example, scorpions) they are the main excretory organ (Schierwater, 2022, ch. 28).

9.4. Antennal and Maxillary Glands (Crustaceans)

In crustaceans, excretory organs are represented by antennal glands or maxillary glands (Schierwater, 2022, ch. 26; Hickman, 2004, ch. 18; Roberts, 2013, ch. 33). They are located in the head region and open to the outside at the base of the corresponding appendages — antennae or maxillae.

Structure and function (Schierwater, 2022, ch. 26; Hickman, 2004, ch. 18):

1. Coelomic sac (end sac). The blind end of the gland, of coelomic origin.

2. Labyrinth. A coiled canal in which water and ions are reabsorbed.

3. Bladder. An expansion of the canal where urine accumulates.

4. Excretory duct. Opens to the outside through an excretory pore.

In different crustacean groups, either one or the other pair of glands functions. In larvae, antennal glands usually function; in adults, maxillary glands, or vice versa (Schierwater, 2022, ch. 26). In some primitive crustaceans (for example, Nebalia), both pairs of glands are present (Hickman, 2004, ch. 18).

The main excretory product in crustaceans is ammonia (in aquatic forms) or uric acid (in terrestrial forms, for example, woodlice) (Schierwater, 2022, ch. 26; Roberts, 2013, ch. 33). Ammonia is highly toxic but readily soluble in water, so aquatic crustaceans can excrete it in large quantities. Terrestrial forms are forced to conserve water and excrete less toxic uric acid.

9.5. Nervous System: General Plan

The nervous system of arthropods, like that of annelids, is built according to the ladder type, but in arthropods it reaches a significantly higher level of concentration and specialization (Miller, 2024, ch. 14; Hickman, 2004, ch. 18; Pedigo, 2002, ch. 2).

Main components (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1; Miller, 2024, ch. 14):

1. Brain (supraoesophageal ganglion). Located in the head, above the oesophagus. Consists of several regions: protocerebrum (innervates eyes), deutocerebrum (innervates antennae), tritocerebrum (innervates chelicerae or upper lip).

2. Suboesophageal ganglion. Located under the oesophagus, innervates mouth appendages.

3. Ventral nerve cord. Paired nerve cord running along the ventral side of the body. Consists of segmental ganglia connected by longitudinal connectives and transverse commissures.

4. Peripheral nerves. Extend from ganglia to sensory organs, muscles, and internal organs.

5. Sympathetic (visceral) nervous system. Innervates internal organs, intestine, heart, respiratory system.

9.6. Concentration of Ganglia

One of the key trends in the evolution of the arthropod nervous system is the concentration of ganglia — fusion of nerve nodes and shortening of the nerve cord (Miller, 2024, ch. 14; Hickman, 2004, ch. 18; Pedigo, 2002, ch. 2). This is manifested to different degrees in different groups:

  • In primitive forms (for example, myriapods), the ventral nerve cord is long, with a large number of segmental ganglia.
  • In insects, there is a tendency toward fusion of ganglia. In many insects, thoracic ganglia fuse into one or two large nodes, and abdominal ganglia are reduced. In the most advanced forms (for example, flies), all ganglia fuse into a single complex (Pedigo, 2002, ch. 2).
  • In arachnids, all ganglia of the ventral nerve cord fuse into a single cephalothoracic ganglion, and in some (for example, mites) into a single circumoesophageal nerve ring (Schierwater, 2022, ch. 28).
  • In crustaceans, concentration of ganglia is also observed, especially in higher crustaceans (Schierwater, 2022, ch. 26).

Concentration of ganglia ensures faster information processing, better coordination of movements, and more complex behavior. It was this that allowed arthropods to develop complex forms of behavior, including social behavior (Miller, 2024, ch. 14).

9.7. Sense Organs

Arthropods possess diverse and highly sensitive sense organs that provide perception of the environment (Miller, 2024, ch. 14; Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1).

Compound eyes. Characteristic of most adult insects and crustaceans. Consist of many separate visual units — ommatidia (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1). Each ommatidium contains a lens, crystalline cone, and light-sensitive cells. Compound eyes provide mosaic vision: the image is composed of separate points perceived by each ommatidium. The number of ommatidia varies from several dozen to 28,000 (in dragonflies) (Pedigo, 2002, ch. 2). Compound eyes are especially good at perceiving movement and polarized light, and in some insects — ultraviolet radiation (McGavin, 2022, ch. 1).

Simple eyes (ocelli). Small light-sensitive organs located on the head between the compound eyes. In insects there are usually three ocelli; in arachnids — from one to six pairs (Pedigo, 2002, ch. 2; Schierwater, 2022, ch. 28). Ocelli do not form images but perceive light intensity and possibly polarization. They play a role in regulating circadian rhythms and orientation (Pedigo, 2002, ch. 2).

Sensilla. Mechanoreceptors located on the body surface, especially on antennae, appendages, and mouthparts (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1). Sensilla may be in the form of hairs, bristles, pits, or plates. They perceive touch, pressure, vibration, and body position in space. In arachnids, which lack antennae, sensilla on appendages compensate for the absence of these sense organs (Schierwater, 2022, ch. 28).

Chemoreceptors. Organs of smell and taste, located on antennae, mouth appendages, tarsi, and sometimes on the body (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1). They perceive molecules of chemical substances in air or water. Chemoreceptors play a key role in food search, recognition of a sexual partner, choice of oviposition site, and avoidance of predators. In some insects, chemoreceptors are capable of perceiving pheromones — chemical signals emitted by other individuals of the same species (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1).

Statocysts. Organs of balance, located at the base of antennae (in crustaceans) or on the body (in some insects) (Pedigo, 2002, ch. 2; Schierwater, 2022, ch. 26). A statocyst is a cavity lined with sensitive hairs, inside which are statoliths — sand grains or concretions that move when body position changes. This allows the animal to orient in space relative to gravity (Schierwater, 2022, ch. 26).

Tympanal organs. Organs of hearing, characteristic of some insects (grasshoppers, crickets, cicadas, some butterflies) (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1). They are a thin membrane stretched over an air cavity, beneath which sensitive cells are located. Tympanal organs perceive sound vibrations, including ultrasonic signals emitted by bats (McGavin, 2022, ch. 1).

9.8. Why the Arthropod Nervous System Is Highly Centralized

The high centralization of the arthropod nervous system is the result of evolutionary adaptation to an active lifestyle, complex behavior, and diverse ecological niches (Miller, 2024, ch. 14; Hickman, 2004, ch. 18; Pedigo, 2002, ch. 2).

Advantages of centralization (Miller, 2024, ch. 14; Pedigo, 2002, ch. 2):

1. Fast information processing. Concentration of ganglia shortens the path of nerve impulses, accelerating the processing of sensory information and the production of responses.

2. Better coordination. Centralization allows coordination of movements of different body parts, especially appendages and wings.

3. Complex behavior. Concentration of nerve centers in the head (cephalization) provides the possibility of complex behavior: learning, memory, social interactions.

4. Energy economy. Fusion of ganglia reduces the total length of nerve pathways, reducing energy costs for impulse transmission.

5. Adaptability. A centralized nervous system is more plastic and allows faster adaptation to environmental changes.

It was the high centralization of the nervous system in combination with developed sense organs that allowed arthropods to become one of the most successful groups of animals on Earth.

10. Reproduction and Development

We have already examined all the main organ systems of arthropods — from the exoskeleton to the nervous system. Now let us consider the processes ensuring continuation of the species and dispersal — reproduction and development. It is these processes that largely explain the demographic success of arthropods and their ability to quickly colonize new territories (Miller, 2024, ch. 14; Hickman, 2004, ch. 18).

10.1. Dioecy and Sexual Dimorphism

The vast majority of arthropods are characterized by dioecy — the presence of separate male and female individuals (Miller, 2024, ch. 14; Roberts, 2013, ch. 33). Hermaphroditism is rare: it has been noted in some barnacles (Cirripedia), which lead a sedentary lifestyle, and in individual insect species (Schierwater, 2022, ch. 26; McGavin, 2022, ch. 1).

Sexual dimorphism — differences in external structure between males and females — is widespread among arthropods (Miller, 2024, ch. 14; Pedigo, 2002, ch. 2). It may manifest in body size, coloration, appendage structure, presence or absence of wings. For example:

  • In many spiders, males are significantly smaller than females and have modified pedipalps for sperm transfer (Schierwater, 2022, ch. 28).
  • In crustaceans, males often have larger claws or specialized copulatory appendages (gonopods) (Schierwater, 2022, ch. 26).
  • In insects, sexual dimorphism may manifest in coloration (for example, in butterflies), in antennal structure (for example, in some moths), in the presence of an ovipositor in females, or in body size (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1).

Sexual dimorphism is usually associated with different reproductive strategies of males and females: males compete for access to females, while females invest more resources in offspring (Miller, 2024, ch. 14).

10.2. External and Internal Fertilization

In arthropods, both types of fertilization occur — external and internal — but internal clearly predominates (Miller, 2024, ch. 14; Roberts, 2013, ch. 33).

External fertilization is characteristic of aquatic forms, for example, horseshoe crabs (Xiphosura) and sea spiders (Pycnogonida) (Schierwater, 2022, ch. 28). In horseshoe crabs, the female lays eggs in sand, and the male fertilizes them by pouring seminal fluid over them. In sea spiders, males and females release gametes into the water, where fertilization occurs.

Internal fertilization may be indirect or direct (Schierwater, 2022, ch. 28; Roberts, 2013, ch. 33).

Indirect internal fertilization (spermatophore-based) is characteristic of many arachnids, myriapods, and some crustaceans (Schierwater, 2022, ch. 28, 29; Roberts, 2013, ch. 33). The male deposits a spermatophore — a packet of sperm — on the substrate, and the female takes it up with her genital opening. In some groups (for example, scorpions), the male actively helps the female find the spermatophore, directing her movements with his pedipalps. In pseudoscorpions, the male deposits a spermatophore with two horns, and the female inserts these horns into her spermathecae (Schierwater, 2022, ch. 28).

Direct internal fertilization (copulation) is characteristic of insects, most crustaceans, and some arachnids (Pedigo, 2002, ch. 2; Schierwater, 2022, ch. 26, 28; McGavin, 2022, ch. 1). The male introduces sperm directly into the female's reproductive tract using a specialized copulatory organ (aedeagus, penis) or modified appendages (for example, pedipalps in spiders). In insects, sperm is often stored in the female's spermatheca and used to fertilize eggs as they are laid (Pedigo, 2002, ch. 2).

10.3. Development: Direct and Indirect (Metamorphosis)

Arthropod development may be direct or indirect (Miller, 2024, ch. 14; Hickman, 2004, ch. 18; Pedigo, 2002, ch. 2).

Direct development means that a young animal emerges from the egg resembling the adult, but smaller and sexually immature. Direct development is characteristic of many arachnids, some crustaceans (for example, crayfish), and primitive insects (for example, silverfish, Thysanura) (Schierwater, 2022, ch. 26, 28; Pedigo, 2002, ch. 2). Young individuals undergo a series of molts, gradually increasing in size and reaching sexual maturity.

Indirect development (metamorphosis) means that a larva emerges from the egg — a stage sharply different from the adult in structure, lifestyle, and often habitat (Miller, 2024, ch. 14; Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1). The larva undergoes a series of molts, sometimes accompanied by profound body restructuring, before transforming into an adult.

In arthropods, several types of metamorphosis are distinguished (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1; Schierwater, 2022, ch. 27):

1. Anamorphosis. Characteristic of some crustaceans and myriapods. The larva hatches from the egg with an incomplete number of segments, and new segments are added at each molt (Schierwater, 2022, ch. 26, 29).

2. Epimorphosis. The larva hatches from the egg with the full number of segments but differs from the adult in proportions and development of some organs. Characteristic of some myriapods (Schierwater, 2022, ch. 29).

3. Hemimetaboly (incomplete metamorphosis). Characteristic of insects with incomplete metamorphosis: cockroaches, grasshoppers, bugs, dragonflies, mayflies (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1). The larva is called a nymph; it resembles the adult but has wing rudiments and immature gonads. With each molt, the nymph becomes more and more similar to the adult. Stages: egg → nymph (several instars) → adult (imago).

4. Holometaboly (complete metamorphosis). Characteristic of the most advanced insect orders: beetles, butterflies, flies, bees, ants (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1). The larva differs sharply from the adult, often has a worm-like shape and specialized mouthparts. After a series of molts, the larva transforms into a pupa — a resting stage in which profound body restructuring occurs. An adult emerges from the pupa. Stages: egg → larva (several instars) → pupa → adult (imago). Holometaboly is considered the most perfect type of metamorphosis, as it allows the functions of growth (larva) and reproduction (imago) to be separated between different stages (McGavin, 2022, ch. 1).

10.4. Larvae: Nauplius, Triungulin, Caterpillar

Arthropod larvae are extremely diverse in form and lifestyle (Miller, 2024, ch. 14; Hickman, 2004, ch. 18; Pedigo, 2002, ch. 2).

Nauplius. This is the most characteristic crustacean larva (Schierwater, 2022, ch. 26; Hickman, 2004, ch. 18). The nauplius has three pairs of appendages: antennules, antennae, and mandibles, which are used for swimming. The body is unsegmented, and there is a single nauplius eye. The nauplius undergoes a series of molts, transforming into a metanauplius, in which rudiments of thoracic appendages and segmentation appear. In many crustaceans (for example, cyclops), the nauplius is the main larval stage. In higher crustaceans (for example, shrimp), the nauplius is followed by the zoea stage, and then the mysis stage (Schierwater, 2022, ch. 26).

Triungulin. This is a specialized larva of some insects, for example, blister beetles (Meloidae) and Strepsiptera (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1). The triungulin has three pairs of thoracic legs with claws and actively searches for a host — usually a bee or another insect — to attach to it and be carried to the nest. This is an example of phoresy — using another animal for dispersal (McGavin, 2022, ch. 1).

Caterpillar. This is the larva of butterflies and moths (Lepidoptera) (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1). The caterpillar has a worm-like body, chewing mouthparts, three pairs of thoracic legs, and up to five pairs of abdominal prolegs. Caterpillars are usually herbivorous and are the main feeding stage in Lepidoptera. After a series of molts, the caterpillar transforms into a pupa, from which the adult butterfly emerges (Pedigo, 2002, ch. 2).

Other types of insect larvae include campodeiform larvae of beetles, eruciform larvae of sawflies, and apodous larvae of flies and bees (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1). The diversity of larval forms reflects the diversity of ecological niches occupied by arthropods.

10.5. Why Metamorphosis Is Characteristic of Many Arthropods

Metamorphosis is an evolutionary acquisition that gives arthropods a number of advantages (Miller, 2024, ch. 14; Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1).

1. Separation of ecological niches. The larva and adult often occupy different ecological niches, feed on different food, and live in different habitats. This reduces intraspecific competition for resources. For example, a butterfly caterpillar feeds on leaves, while the adult butterfly feeds on nectar; a mosquito larva lives in water, while the adult mosquito lives in air (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1).

2. Specialization of stages. The larva is usually specialized for rapid growth and accumulation of nutrients, while the adult is specialized for reproduction and dispersal. Such separation of functions increases the efficiency of the life cycle (McGavin, 2022, ch. 1).

3. Resistance to unfavorable conditions. The pupa (in holometabolous insects) is often the stage in which the insect survives unfavorable conditions (winter, drought). For example, many butterflies overwinter as pupae (Pedigo, 2002, ch. 2).

4. Rapid colonization of new territories. Larvae of many arthropods are specialized for dispersal. For example, larvae of marine crustaceans (nauplii, zoeae) are carried by currents over long distances, and insect larvae can migrate in search of food (Schierwater, 2022, ch. 26; Pedigo, 2002, ch. 2).

5. Evolutionary plasticity. Metamorphosis allows arthropods to adapt quickly to environmental changes, since different stages can evolve independently (McGavin, 2022, ch. 1).

It is metamorphosis that largely explains the evolutionary success of insects — the most numerous group of animals on Earth (Miller, 2024, ch. 15).

10.6. Why Larvae Play a Key Role in Dispersal

Arthropod larvae often perform the function of dispersal — they allow the species to colonize new territories and avoid competition with parental individuals (Miller, 2024, ch. 14; Schierwater, 2022, ch. 26; Pedigo, 2002, ch. 2).

1. Marine larvae. In many marine crustaceans (crabs, shrimp, barnacles), larvae (nauplius, zoea, cypris) lead a planktonic lifestyle and are carried by currents tens and hundreds of kilometers from the hatching site (Schierwater, 2022, ch. 26; Hickman, 2004, ch. 18). This allows the species to colonize new habitats and maintain genetic exchange between populations.

2. Insect larvae. In insects, larvae can also disperse actively or passively. For example, aphid larvae (Aphididae) can be carried by wind, and larvae of some butterflies migrate in search of food (Pedigo, 2002, ch. 2). In some species (for example, blister beetles), triungulin larvae attach to adult insects and thus disperse (McGavin, 2022, ch. 1).

3. Phoresy. Using other animals for dispersal (phoresy) is a widespread strategy among arthropod larvae. For example, mite larvae can attach to insects or birds and be carried over long distances (Roberts, 2013, ch. 33).

Thus, larvae are not merely "immature" stages, but an important stage of the life cycle ensuring dispersal, colonization of new resources, and survival of the species in a changing environment.

11. Ecological and Evolutionary Significance

We have already examined in detail the external and internal structure of arthropods, their organ systems, reproduction, and development. Now it is time to summarize and answer the main question: why have arthropods become the most prosperous group of animals on Earth? What is their ecological and evolutionary significance? The answer to this question links all previous sections into a single picture (Miller, 2024, ch. 14; Hickman, 2004, ch. 18).

11.1. Why Arthropods Dominate Terrestrial and Aquatic Ecosystems

Arthropods are the only group of animals that dominates equally in both aquatic and terrestrial ecosystems. In seas and fresh waters, crustaceans predominate; on land, insects and arachnids (Miller, 2024, ch. 14; Schierwater, 2022, ch. 26; Pedigo, 2002, ch. 2). What are the reasons for such universal success?

In aquatic ecosystems (Schierwater, 2022, ch. 26; Hickman, 2004, ch. 18):

1. High abundance and biomass. Copepods (Copepoda) and euphausiids (Euphausiacea, krill) form huge aggregations that serve as the basis of food chains in the oceans. The biomass of Antarctic krill is estimated at hundreds of millions of tons (Schierwater, 2022, ch. 26).

2. Key links in food webs. Crustaceans occupy a central position in marine trophic networks, linking primary producers (phytoplankton) with higher consumers (fish, whales, seabirds) (Schierwater, 2022, ch. 26).

3. Biofiltration and detritivory. Many crustaceans (barnacles, copepods, mysids) filter water, purifying it of organic particles, while others (amphipods, isopods) process detritus, returning nutrients to the ecosystem (Schierwater, 2022, ch. 26).

4. Adaptive radiation. Crustaceans have colonized all aquatic habitats — from deep-sea trenches to intertidal zones, from freshwater lakes to hypersaline lagoons (Schierwater, 2022, ch. 26).

In terrestrial ecosystems (Miller, 2024, ch. 15; Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1):

1. Enormous species diversity. Insects make up more than 80% of all described animal species. More than 350,000 species of beetles alone have been described, and more than 150,000 species of butterflies and moths (Schierwater, 2022, ch. 27).

2. Occupation of all ecological niches. Insects and arachnids occur in soil, on plants, in the air, in fresh waters, and in the bodies of other animals. They have even colonized extreme habitats such as deserts, high mountains, and polar regions (Miller, 2024, ch. 15; McGavin, 2022, ch. 1).

3. Key ecosystem functions. Arthropods perform critically important functions: pollination of plants, decomposition of organic remains, regulation of the abundance of other animals, and soil aeration (Pedigo, 2002, ch. 2; Miller, 2024, ch. 15).

4. High abundance. The abundance of individual species can reach billions of individuals. For example, locust swarms can number billions of insects and occupy thousands of square kilometers (Miller, 2024, ch. 15).

11.2. Why Arthropods Occupy Almost All Ecological Niches

The ability of arthropods to occupy almost all ecological niches is the result of a complex of morphological, physiological, and behavioral adaptations (Miller, 2024, ch. 14; Hickman, 2004, ch. 18; Pedigo, 2002, ch. 2).

Morphological prerequisites (Miller, 2024, ch. 14; Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1):

1. Small size. Most arthropods have sizes from a few millimeters to a few centimeters. Small size allows them to occupy microhabitats inaccessible to large animals: cracks in bark, cavities in soil, spaces between sand grains (McGavin, 2022, ch. 1).

2. Exoskeleton. The chitinous exoskeleton provides protection, support, and waterproofness, allowing arthropods to survive in a variety of conditions (Miller, 2024, ch. 14).

3. Jointed appendages. Specialization of appendages for walking, swimming, jumping, digging, capturing food, and sensory perception opens enormous possibilities for colonizing different environments (Pedigo, 2002, ch. 2).

4. Diversity of mouthparts. Chewing, piercing-sucking, lapping, siphoning, and other types of mouthparts allow arthropods to feed on a variety of foods — from wood to blood (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1).

5. Wings. Flight is a unique feature of insects, ensuring rapid dispersal, food search, and avoidance of predators (Miller, 2024, ch. 15).

Physiological prerequisites (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1; Schierwater, 2022, ch. 26):

1. Tracheal system. Efficient respiration allows insects to maintain a high metabolic rate necessary for flight and an active lifestyle (Pedigo, 2002, ch. 2).

2. Malpighian tubules. An efficient excretory system allows water to be conserved and survival in arid conditions (Pedigo, 2002, ch. 2).

3. Metamorphosis. Division of the life cycle into stages with different ecological requirements reduces intraspecific competition and allows the species to use more resources (McGavin, 2022, ch. 1).

4. Diapause. The ability to enter a resting state under unfavorable conditions allows arthropods to survive winters, droughts, and other stresses (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1).

Behavioral prerequisites (Miller, 2024, ch. 14; McGavin, 2022, ch. 1):

1. Complex behavior. Arthropods demonstrate diverse forms of behavior: from simple reflexes to complex social interactions (Miller, 2024, ch. 14).

2. Sociality. In insects (termites, ants, bees, wasps) and some crustaceans (some shrimp), complex social systems have developed that allow efficient use of resources and defense against enemies (Miller, 2024, ch. 15; Schierwater, 2022, ch. 26).

3. Capacity for learning. Many arthropods are capable of learning and memory, which increases their adaptability in a changing environment (McGavin, 2022, ch. 1).

11.3. Why Arthropods Are a Key Group for Understanding Invertebrate Evolution

Arthropods occupy a unique position in the animal system and are a key group for understanding invertebrate evolution for several reasons (Miller, 2024, ch. 14; Hickman, 2004, ch. 18; Regier et al., 2010).

1. Antiquity and rich fossil record. Arthropods have been known since the early Cambrian (more than 500 million years ago). Their fossil remains are numerous and well preserved, allowing evolutionary changes over time to be traced (Hickman, 2004, ch. 18; Schierwater, 2022, ch. 26).

2. Morphological diversity. Arthropods demonstrate enormous diversity of body forms, appendages, mouthparts, and sense organs. Studying this diversity allows us to understand the patterns of morphological evolution (Miller, 2024, ch. 14).

3. Key evolutionary innovations. It was in arthropods that many key innovations first appeared: exoskeleton, jointed appendages, tracheal system, wings, metamorphosis, sociality. Studying these innovations helps understand general principles of evolution (Miller, 2024, ch. 14; Pedigo, 2002, ch. 2).

4. Phylogenetic significance. Arthropods occupy a key position in animal phylogeny. They belong to the group Ecdysozoa and the clade Panarthropoda, making them important for understanding the origin and evolution of protostomes (Regier et al., 2010; Schierwater, 2022, ch. 28).

5. Model objects. Many arthropods (Drosophila, silkworm, honeybee, daphnia) are model objects in genetics, physiology, ecology, and evolutionary biology (Schierwater, 2022, ch. 26, 27).

11.4. Why Evolutionary Success Is Linked to Exoskeleton, Segmentation, Appendages, and Metamorphosis

The evolutionary success of arthropods is the result of a combination of several key innovations that we examined in detail in previous sections (Miller, 2024, ch. 14; Hickman, 2004, ch. 18; Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1).

Exoskeleton (Miller, 2024, ch. 14; McGavin, 2022, ch. 1):

  • Provides protection from predators and mechanical damage.
  • Serves as a water barrier, allowing colonization of arid habitats.
  • Is a site of muscle attachment, ensuring fast and precise movements.
  • Allows body shape to be maintained and internal organs protected.

Segmentation and tagmosis (Miller, 2024, ch. 14; Hickman, 2004, ch. 18):

  • Ensure division of the body into functional regions (head, thorax, abdomen).
  • Allow different body regions to specialize for different tasks.
  • Provide cephalization — concentration of nerve centers and sense organs at the anterior end of the body.
  • Create the basis for specialization of appendages.

Jointed appendages (Miller, 2024, ch. 14; Pedigo, 2002, ch. 2):

  • Provide high mobility and precision of movements.
  • Allow appendages to specialize for different functions: walking, swimming, jumping, digging, capturing food, sensory perception.
  • Ensure the possibility of active movement in a variety of environments.

Metamorphosis (Pedigo, 2002, ch. 2; McGavin, 2022, ch. 1):

  • Allows ecological niches of larva and adult to be separated.
  • Reduces intraspecific competition for resources.
  • Ensures specialization of stages for growth and reproduction.
  • Increases resistance to unfavorable conditions (pupa stage or diapause).
  • Ensures effective dispersal (larvae of marine crustaceans, insects).

It was the combination of all these innovations — exoskeleton, segmentation with tagmosis, jointed appendages, and metamorphosis — that made arthropods the most successful group of animals on Earth (Miller, 2024, ch. 14).

12. Significance for the Agrosphere

We have already examined the general body plan of arthropods, their ecological and evolutionary significance. Now it is time to answer the question: why is this knowledge critically important for a specialist in the field of agriculture? Arthropods play a dual role in the agrosphere — they can be both serious pests and indispensable helpers. Understanding their biology, ecology, and functional role is the basis for making competent agronomic decisions (Pedigo, 2002, ch. 1; Beers et al., 2003).

12.1. Pests of Agricultural Crops

This is perhaps the best-known and economically most significant role of arthropods in the agrosphere. According to estimates, annual crop losses from pests constitute a significant share of gross agricultural production worldwide (Pedigo, 2002, ch. 1; Beers et al., 2003).

Main groups of pests (Pedigo, 2002, ch. 2; Beers et al., 2003):

1. Insects with chewing mouthparts. Butterfly caterpillars (Lepidoptera), sawfly larvae (Hymenoptera: Symphyta), leaf beetles (Coleoptera: Chrysomelidae), and locusts (Orthoptera: Acrididae) all feed on leaves, stems, fruits, and roots of cultivated plants. For example, codling moth caterpillars (Cydia pomonella) feed inside apple fruits, making them unsuitable for sale. Losses from this pest in the absence of control can reach 100% of the harvest (Beers et al., 2003).

2. Insects with piercing-sucking mouthparts. Aphids (Hemiptera: Aphididae), leafhoppers (Hemiptera: Cicadellidae), bugs (Hemiptera: Miridae), and thrips (Thysanoptera) suck sap from plants, causing deformation of leaves, fruits, and shoots, as well as transmission of viral diseases. For example, rosy apple aphid (Dysaphis plantaginea) causes leaf curling and fruit deformation in apple (Beers et al., 2003). Mites (Acari: Tetranychidae) also belong to this group — they suck out the contents of leaf cells, causing browning and falling (Beers et al., 2003).

3. Storage pests. Granary mites (Acari: Acaridae), seed beetles (Coleoptera: Bruchidae), and moths (Lepidoptera: Pyralidae) damage grain, flour, groats, and other products during storage (Pedigo, 2002, ch. 2; Huang et al., 2012).

4. Root-system pests. Larvae of click beetles (Coleoptera: Elateridae, wireworms), larvae of chafer beetles (Coleoptera: Scarabaeidae), and root aphids (Hemiptera: Aphididae) damage underground plant organs, leading to stunted growth and plant death (Pedigo, 2002, ch. 2; Beers et al., 2003).

Economic significance. Losses from pests can be direct (reduced yield) and indirect (costs of

References

  1. Beers, E.H., Suckling, D.M., Prokopy, R.J., Avilla, J. (2003). ‘Ecology and Management of Apple Arthropod Pests’, in Ferree, D.C., Warrington, I.J. (ed.) Apples: botany, production, and uses. Cambridge, MA: CABI, pp. 489-520.
  2. Bonkowski, Michael, Callaham, M.A. Jr., Clarholm, Marianne, Coleman, D.C., Crossley, D.A. Jr., Griffiths, Bryan, Hendrix, P.F., McSorley, Robert, John, M.G.S., van Vliet, P.C.J. (2012). ‘Soil Fauna’, in Huang, P.Ming, Li, Yuncong, Sumner, M.E. (ed.) Handbook of Soil Sciences Properties and Processes. Boca Raton, FL: CRC Press, pp. 25-1:25-44.
  3. DeSalle, Rob (2022). ‘Subphylum Hexapoda’, in Schierwater, Bernd, DeSalle, Rob (ed.) Invertebrate Zoology. A Tree of Life Approach. Boca Raton, FL: CRC Press, pp. 407-422.
  4. Derkarabetian, Shahan (2022). ‘Phylum Arthropodachelicerata’, in Schierwater, Bernd, DeSalle, Rob (ed.) Invertebrate Zoology. A Tree of Life Approach. Boca Raton, FL: CRC Press, pp. 423-442.
  5. Gilgado, J.D. (2022). ‘Subphylum Myriapoda’, in Schierwater, Bernd, DeSalle, Rob (ed.) Invertebrate Zoology. A Tree of Life Approach. Boca Raton, FL: CRC Press, pp. 443-458.
  6. Gullan, P.J., Cranston, P.S. (2014). ‘Internal anatomy and physiology’, in The Insects. An Outline of Entomology. West Sussex, UK: John Wiley & Sons, pp. 56-94.
  7. Helfman, G.S., Collette, B.B., Facey, D.E., Bowen, B.W. (2009). ‘Functional morphology of locomotion and feeding’, in The Diversity of Fishes. Biology, Evolution, and Ecology. West Sussex, UK: Wiley-Blackwell, pp. 111-128.
  8. Helfman, G.S., Collette, B.B., Facey, D.E., Bowen, B.W. (2009). ‘Soft anatomy’, in The Diversity of Fishes. Biology, Evolution, and Ecology. West Sussex, UK: Wiley-Blackwell, pp. 41-56.
  9. Hickman, C.P. Jr., Keen, S.L., Larson, Allan, Eisenhour, D.J. (2015). ‘Arthropods’, in Animal Diversity. New York, NY: McGraw-Hill Education, pp. 258-302.
  10. Hickman, C.R. Jr., Roberts, L.S., Larson, Allan, I’Anson, H. (2004). ‘Aouatic Mandibulates’, in Integrated Principles of Zoology. New York, NY: Higher Education, pp. 377-396.
  11. Hickman, C.R. Jr., Roberts, L.S., Larson, Allan, I’Anson, H. (2004). ‘Arthropods’, in Integrated Principles of Zoology. New York, NY: Higher Education, pp. 364-376.
  12. Hickman, C.R. Jr., Roberts, L.S., Larson, Allan, I’Anson, H. (2004). ‘Chordates’, in Integrated Principles of Zoology. New York, NY: Higher Education, pp. 467-485.
  13. Hickman, C.R. Jr., Roberts, L.S., Larson, Allan, I’Anson, H. (2004). ‘Classification and Phylogeny of Animals’, in Integrated Principles of Zoology. New York, NY: Higher Education, pp. 190-206.
  14. Hickman, C.R. Jr., Roberts, L.S., Larson, Allan, I’Anson, H. (2004). ‘Internal Fluids and Respiration’, in Integrated Principles of Zoology. New York, NY: Higher Education, pp. 655-676.
  15. Hickman, C.R. Jr., Roberts, L.S., Larson, Allan, I’Anson, H. (2004). ‘Smaller Protostome Phyla’, in Integrated Principles of Zoology. New York, NY: Higher Education, pp. 426-441.
  16. Hickman, C.R. Jr., Roberts, L.S., Larson, Allan, I’Anson, H. (2004). ‘Terrestrial Mandibulates’, in Integrated Principles of Zoology. New York, NY: Higher Education, pp. 397-425.
  17. McGavin, G.C., Davranoglou, L. (2022). ‘Introduction to insect evolution and biology’, in Essential Entomology. Cambridge, UK: Oxford University Press, pp. 1-34.
  18. Miller, Stephen, Tupper, T.A. (2024). ‘Amphibians: The First Terrestrial Vertebrates’, in Zoology. New York, NY: McGraw Hill, pp. 335-352.
  19. Miller, Stephen, Tupper, T.A. (2024). ‘Protection, Support, and Movement’, in Zoology. New York, NY: McGraw Hill, pp. 415-432.
  20. Miller, Stephen, Tupper, T.A. (2024). ‘The Arthropods: Blueprint for Success’, in Zoology. New York, NY: McGraw Hill, pp. 238-255.
  21. Miller, Stephen, Tupper, T.A. (2024). ‘The Mandibulata: Pancrustacea and Myriapoda’, in Zoology. New York, NY: McGraw Hill, pp. 256-283.
  22. Miller, Stephen, Tupper, T.A. (2024). ‘Transport and Exchange in Animals’, in Zoology. New York, NY: McGraw Hill, pp. 479-498.
  23. Pedigo, L.P. (2002). ‘Insect structures and life processes’, in Entomology and Pest Management. New Jersey: Prentice Hall, pp. 35-78.
  24. Rabet, Nicolas (2022). ‘Subphylum Crustacea’, in Schierwater, Bernd, DeSalle, Rob (ed.) Invertebrate Zoology. A Tree of Life Approach. Boca Raton, FL: CRC Press, pp. 393-406.
  25. Regier, J.C., Shultz, J.W., Zwick, Andreas, Hussey, April, Ball, Bernard, Wetzer, Regina, Martin, J.W., Cunningham, C.W. (2010). ‘Arthropod relationships revealed by phylogenomic analysis of nuclear protein-coding sequences’, Nature, 463(7284), 1079-1083. doi: 10.1038/nature08742 (PubMed)
  26. Roberts, L.S., Janovy, J. Jr., Nadler, Steve (2013). ‘Phylum Arthropoda: Form, Function, and Classification’, in Foundations of Parasitology. New York, NY: McGraw-Hill, pp. 489-512.
  27. Vaughan, T.A., Ryan, J.M. (2015). ‘Mammalian Characteristics’, in Mammalogy. Burlington, MA: Jones & Bartlett Learning, .
  28. vanEmden, H.F. (2013). ‘Class Arachnida’, in Handbook of Agricultural. Entomology. West Sussex, UK: Wiley-Blackwell, pp. 272-283.
  29. vanEmden, H.F. (2013). ‘External features of insects – structure and function’, in Handbook of Agricultural. Entomology. West Sussex, UK: Wiley-Blackwell, pp. 9-24.
  30. Шарова, И.Х. (2002). ‘Тип Членистоногие (Arthropoda) [Phylum Arthropoda]’, in Зоология беспозвоночных [Invertebrate Zoology]. Москва: ВЛАДОС, pp. 341-529.