Insects: External Structure and Development
1. Introduction: The Place of Insects in the System Animalia
1.1. Insecta as the Largest Group of Animalia
Let us begin our course with a statement that, for all its obviousness, requires reflection: insects are the most numerous and diverse group of animals on our planet. To understand the scale of this phenomenon, let us turn to numbers.
According to modern estimates, the total number of described species of living organisms is about 1.75 million, of which at least 1.5 million are insects (Gullan, 2014; Zakhvatkin, 2001). In other words, approximately every second or every third known species of living thing is an insect. If we also consider that many groups of insects, especially in the tropics, remain undescribed, and that estimates of the total number of existing species range from 3 to 8 million (McGavin, 2022), it becomes clear: insects represent the dominant form of life on land.
This disproportion is so great that the outstanding geneticist J. B. S. Haldane, answering the question of what can be concluded about the Creator from the study of creation, allegedly remarked: “He has an inordinate fondness for beetles” (Gullan, 2014). Indeed, beetles (Coleoptera) make up almost 40% of all described insects — more than 350 thousand species (Gullan, 2014). For comparison: all mammals on Earth number about 5.5 thousand species (Hickman, 2015). Thus, insects not only surpass any other group of animals in number of species — they surpass it by orders of magnitude.
Data on the number of individuals are equally impressive. It has been calculated that for every human on Earth there are about 200 million insects, and for every acre of land about 40 million individuals (Pedigo, 2002). In the Brazilian Amazon, ants exceed all vertebrates combined in biomass by a ratio of 4:1 (Pedigo, 2002). These figures give grounds to assert that insects are the most successful group of animals on Earth, if success is measured by abundance and biomass.
1.2. Hexapoda and Insecta sensu stricto
Before moving further, it is necessary to clearly define the subject of our discussion. In modern systematics, a distinction is made between the superclass Hexapoda (six-legged) and the class Insecta (insects in the narrow sense).
Hexapoda includes all arthropods that have three pairs of legs on the thoracic segments. In addition to insects proper, this superclass contains three small classes: Protura (proturans), Diplura (diplurans), and Collembola (springtails) (McGavin, 2022; Miller, 2024). These three groups are united under the name Entognatha — entognathous — because their mouthparts are recessed into a special cavity of the head capsule (Gullan, 2014). The total number of entognathan species is small — about 10 thousand, which is less than 1% of Hexapoda diversity.
Insects proper — Insecta sensu stricto — are characterized by ectognathous mouthparts, that is, their jaws freely protrude from the head capsule. Insecta includes two primarily wingless orders — Archaeognatha (bristletails) and Zygentoma (silverfish) — and the enormous group Pterygota (winged insects) (Gullan, 2014; McGavin, 2022). It is this group, numbering more than a million species, that will be the center of our attention.
Thus, when we say “insects,” we mean Insecta sensu stricto — the group including winged insects and their primarily wingless relatives. If this caveat is not made, one may encounter terminological confusion, since in the broad sense “insects” is sometimes used to refer to all six-legged arthropods.
1.3. Why Insects Dominate Terrestrial and Freshwater Ecosystems
The dominance of insects in terrestrial and freshwater ecosystems is a fact without analog among other groups of animals. If in the seas crustaceans and mollusks predominate, and among vertebrates fish, then on land insects have no equals in number of species, number of individuals, or diversity of ecological roles.
What is this dominance connected with? We will examine this question in detail throughout the course, but even now we can name the key factors that will repeatedly arise in our presentation.
Small size. Most insects are between 1 and 10 mm long (McGavin, 2022). Small size means that the habitat for an insect is much more “fine-grained” than for a large animal: a single tree can support the existence of hundreds of insect species, whereas for mammals it represents only one food resource (Gullan, 2014). Small size also means a high surface-to-volume ratio, which makes gas exchange through tracheae possible without the participation of the circulatory system (Hickman, 2015).
Flight. Insects are the only invertebrates to have mastered active flight. Wings allowed them to colonize new habitats, escape from predators, and use food resources distributed in space (McGavin, 2022; Pedigo, 2002). The ability to fly arose about 300–350 million years ago, in the Carboniferous period, and since then insects have remained the only flying invertebrates (Gullan, 2014).
Metamorphosis. The ability to undergo complete transformation (holometaboly) allowed larvae and adults to occupy different ecological niches without competing with each other (Gullan, 2014; Pedigo, 2002). This is a key evolutionary acquisition, which we will examine in detail in section 7.
High fecundity. A single female insect is capable of laying hundreds, thousands, and sometimes millions of eggs. This ensures rapid recovery of population numbers after unfavorable conditions (Zakhvatkin, 2001). For example, a female house fly can lay up to 200 eggs at a time, and up to 2000 over her lifetime (Blokhin, 2022).
Ability to undergo diapause. Insects can survive unfavorable seasons in a state of physiological rest, which allows them to persist in temperate and cold climates (Gullan, 2014; Pedigo, 2002). Diapause is not simply torpor, but a complex physiological mechanism, which we will examine in section 8.
All these factors act in combination, and it is their combination that explains why insects occupy practically all available ecological niches on land — from polar tundras to tropical forests, from high-mountain glaciers to hot springs, from soil horizons to the aerial environment (Gullan, 2014; Blokhin, 2022).
1.4. Why Insects Are a Key Group for Understanding Arthropod Evolution
Insects occupy a unique position in the animal system not only because of their abundance, but also because they represent a key group for understanding arthropod evolution.
Modern phylogenetic studies, based on molecular and morphological data, have shown that Hexapoda (including Insecta) originated from crustacean ancestors (Miller, 2024; McGavin, 2022). In other words, insects are not simply one of the groups of arthropods, but a branch originating within Crustacea. This conclusion, confirmed by data from comparative anatomy, embryology, and molecular biology, radically changed our understanding of arthropod phylogeny (Gullan, 2014).
The closest relatives of Hexapoda among crustaceans are considered to be Remipedia — blind crustaceans living in marine caves (Miller, 2024; McGavin, 2022). This group, first described only in the 1980s, represents the sister group to all six-legged arthropods. Thus, Insecta is not simply a terrestrial group, but a branch of crustaceans that came onto land. This fact has profound implications for understanding insect evolution: many of their features — from limb structure to features of embryonic development — were inherited from aquatic ancestors.
Equally important is that insects represent the most studied group of arthropods. It was on the example of insects that many fundamental concepts of biology were developed — from genetics (on Drosophila melanogaster) to evolutionary theory (on the example of mimicry in butterflies). Therefore, understanding insects is necessary for understanding not only entomology, but biology as a whole (Gullan, 2014).
1.5. Brief Reminder on Phylogeny
In order to orient ourselves in the subsequent material, we need a general idea of the phylogenetic relationships within Hexapoda and Insecta.
The class Insecta in the narrow sense is divided into two groups. The first is the primarily wingless insects, represented by the orders Archaeognatha and Zygentoma. They have retained a number of primitive features, including the ability to molt in the adult state and the absence of wings (Gullan, 2014; McGavin, 2022). These groups are few in number — about 600 species of Archaeognatha and about 600 species of Zygentoma (McGavin, 2022).
The second, much more extensive group is Pterygota, or winged insects. Within Pterygota, two main branches are distinguished: Palaeoptera (ancient-winged), to which dragonflies (Odonata) and mayflies (Ephemeroptera) belong, and Neoptera (new-winged), including all other winged insects (Gullan, 2014; McGavin, 2022). Palaeoptera are few — about 5.5 thousand species, whereas Neoptera number more than a million species.
Among Neoptera, in turn, groups with incomplete metamorphosis (Exopterygota, or Hemimetabola) and with complete metamorphosis (Endopterygota, or Holometabola) are distinguished. The latter includes the overwhelming majority of modern insects — beetles, butterflies, dipterans, hymenopterans, and others (Gullan, 2014; McGavin, 2022). It is Holometabola that make up about 80% of all known insect species.
This scheme will be our guide throughout the course. Now, having a general idea of the place of insects in the system Animalia, we can move on to a detailed examination of their external structure.
2. External Structure: Head, Thorax, Abdomen
2.1. Three Tagmata: General Body Plan
The body of an insect, like that of all arthropods, is segmented. However, unlike millipedes, in which body segments are more or less uniform, in insects they are united into three functionally distinct groups — tagmata: the head (cephalon), thorax, and abdomen (Gullan, 2014; Zakhvatkin, 2001). This body plan is so characteristic that an insect can be recognized by it at first glance.
Tagmosis — the process of uniting segments into functional divisions — is one of the key evolutionary acquisitions of arthropods (Hickman, 2015; Miller, 2024). In insects it reached its most complete expression: each body division is specialized for performing certain functions. The head is the sensory and feeding center, the thorax is the locomotor division, and the abdomen is the container of internal organs (Zakhvatkin, 2001).
It is important to understand that the segments forming each tagma fuse with one another, but the boundaries between them are often preserved in the form of sutures, grooves, or changes in the structure of the integument. These boundaries are of great importance for systematics, since their position and structure differ among different groups of insects (Gullan, 2014).
2.2. Head (cephalon)
The head of an insect is a dense chitinous capsule formed by the fusion of several segments (Gullan, 2014; Zakhvatkin, 2001). It bears the sense organs and mouthparts, and also contains the brain — the supraesophageal ganglion (Pedigo, 2002).
Structure of the Head Capsule
The head capsule (cranium) is a solid structure consisting of several fused sclerites. Its surface is divided by sutures — lines that may be either true boundaries between segments or secondary formations associated with the internal skeleton (Zakhvatkin, 2001; Pedigo, 2002).
The most noticeable suture is the epicranial suture — a Y-shaped line on the vertex, which in larvae serves as a line of rupture during molting (Gullan, 2014). The branches of this suture separate the frons and the vertex. Other important regions of the head include the genae (cheeks), clypeus, and occiput (Zakhvatkin, 2001; Pedigo, 2002).
Inside the head capsule is the tentorium — an internal skeleton formed by invaginations of the integument. It gives the head additional strength and serves as the site of attachment for powerful mandibular muscles (Zakhvatkin, 2001). The structure of the tentorium is often used in systematics, especially in the identification of hymenopterans (Gullan, 2014).
Antennae
Antennae, or feelers, are paired segmented appendages located on the head between or below the eyes (Gullan, 2014; Pedigo, 2002). They perform the functions of smell, touch, and in some groups also hearing. Antennae are extremely diverse in form, and their structure is widely used in systematics.
A typical antenna consists of three main parts: the scape, pedicel, and flagellum (Gullan, 2014; Zakhvatkin, 2001). The first segment is usually larger than the others and contains muscles that provide mobility to the antenna. The second segment contains Johnston's organ — a sensory structure that perceives movements of the flagellum (Gullan, 2014). The flagellum may consist of one or many segments and often bears numerous sensilla — sensory structures (Pedigo, 2002).
The forms of antennae are astonishingly diverse (Gullan, 2014; Zakhvatkin, 2001; Pedigo, 2002):
- Filiform — all segments are approximately equal, the antenna resembles a thread (ground beetles, cockroaches);
- Moniliform — segments are rounded, resembling beads (darkling beetles);
- Serrate — segments are expanded on one side, resembling saw teeth (click beetles);
- Pectinate — the processes of the segments are very long, resembling a comb (males of some butterflies);
- Clavate — segments gradually widen toward the apex (white butterflies);
- Lamellate — the last segments form plates capable of folding into a bundle (dung beetles, chafers);
- Plumose — with numerous long hairs (male mosquitoes);
- Geniculate — the first segment is long, and the flagellum extends from it at an angle (ants, weevils).
The diversity of antennal forms reflects the diversity of their functions. In males of many insects the antennae are more strongly developed than in females, which is connected with the need to find a sexual partner using pheromones (Gullan, 2014; Zakhvatkin, 2001).
Eyes and Ocelli
On the head of insects are located the organs of vision: compound faceted eyes and simple ocelli (Gullan, 2014; Pedigo, 2002).
Compound eyes are paired structures consisting of many individual eye units — ommatidia (Gullan, 2014; Zakhvatkin, 2001). The number of ommatidia varies from a few units to 28,000 (in dragonflies) (Pedigo, 2002). Each ommatidium contains a corneal lens, a crystalline cone, and a group of light-sensitive retinal cells forming the rhabdom (Gullan, 2014; Hickman, 2015).
Compound eyes of insects do not form a clear image in the sense in which we speak of vertebrate vision. They perceive the world as a mosaic of points of different intensity — so-called mosaic vision (Zakhvatkin, 2001; Hickman, 2015). However, this system is superbly adapted for detecting movement: insects notice the movement of objects with high speed (Gullan, 2014).
Many insects are capable of perceiving ultraviolet light, inaccessible to the human eye (Gullan, 2014; Pedigo, 2002). This has important ecological significance: flowers that we see as monochromatic may appear to insects as contrasting patterns indicating the path to nectar (Pedigo, 2002). Some insects perceive polarized light and use it for navigation (Gullan, 2014).
Simple ocelli are small light-sensitive organs located on the vertex or frons (Gullan, 2014; Zakhvatkin, 2001). In adult insects there are usually three ocelli arranged in a triangle, but in some groups there may be two or none at all. Ocelli do not form images, but perceive changes in light intensity and probably participate in the regulation of circadian rhythms (Gullan, 2014; Pedigo, 2002).
In larvae of insects with complete metamorphosis, compound eyes are absent. They are replaced by stemmata — simple eye units, the number of which may reach six or more (Gullan, 2014). Stemmata are usually located on the sides of the head and provide the larva with perception of light and movement (Gullan, 2014).
Mouthparts
The mouthparts of insects are one of the most important and diverse structures determining feeding methods and, consequently, the ecological roles of these animals (Gullan, 2014; Zakhvatkin, 2001). We will examine them in detail in the next section, but here we note their general plan.
The basis of the insect mouthparts is the chewing (mandibulate) type, characteristic of the most primitive groups (Gullan, 2014; Zakhvatkin, 2001). It includes the upper lip (labrum), a pair of mandibles, a pair of maxillae, and the lower lip (labium). All these structures, except for the upper lip, are modified limbs of the head segments (Gullan, 2014; Pedigo, 2002).
The upper lip (labrum) is an unpaired plate covering the mouth opening from above (Zakhvatkin, 2001). Mandibles are hard, often toothed jaws used for biting off and crushing food (Pedigo, 2002). Maxillae are more complex structures bearing palps and participating in food processing (Gullan, 2014). The lower lip (labium) is formed by the fusion of the second pair of maxillae and covers the mouth opening from below (Zakhvatkin, 2001).
2.3. Thorax
The thorax is the locomotor division of the insect body, bearing the legs and wings (Gullan, 2014; Zakhvatkin, 2001). It consists of three segments, called the prothorax, mesothorax, and metathorax (Gullan, 2014; Pedigo, 2002).
Structure of Thoracic Segments
Each thoracic segment is built according to a single plan and consists of four main sclerites (Zakhvatkin, 2001; Pedigo, 2002):
- Tergum — dorsal plate;
- Sternum — ventral plate;
- Pleura — lateral plates.
In insects with well-developed wings, the meso- and metathorax form the so-called pterothorax — the division bearing the wings (Gullan, 2014). The prothorax, lacking wings, is usually smaller and retains a simpler structure.
The tergum of each thoracic segment is called the notum (Gullan, 2014; Zakhvatkin, 2001). The pronotum is often well developed and covers part of the head or the bases of the legs (Gullan, 2014). In beetles, cockroaches, and some other groups it may be greatly enlarged and form a shield (Pedigo, 2002). The mesonotum and metanotum in winged insects are usually divided into several parts: prescutum, scutum, and scutellum (Zakhvatkin, 2001; Pedigo, 2002).
The pleura — lateral walls of the thoracic segments — in winged insects are often divided by a pleural suture into two parts: episternum and epimeron (Gullan, 2014; Zakhvatkin, 2001). The pleural suture serves as the site of attachment of wing muscles and plays an important role in the mechanics of flight (Zakhvatkin, 2001).
Inside the thorax is powerful musculature ensuring movement of the legs and wings. In higher insects (dipterans, hymenopterans), the thoracic segments are strongly specialized: the mesothorax is enlarged, while the pro- and metathorax are reduced (Zakhvatkin, 2001). This is connected with the fact that in these groups only the anterior pair of wings participates in flight.
Legs
On each thoracic segment there is a pair of legs; thus, an adult insect always has six legs — a feature that gave the superclass its name Hexapoda (Gullan, 2014; Miller, 2024). The legs of insects are extremely diverse in structure and function, reflecting the diversity of their lifestyles.
A typical insect leg consists of the following segments (Gullan, 2014; Zakhvatkin, 2001; Pedigo, 2002):
- Coxa — basal segment connecting the leg to the body;
- Trochanter — small segment providing mobility;
- Femur — usually the largest segment;
- Tibia — long segment, often bearing spurs;
- Tarsus — segmented structure, usually of 1–5 segments;
- Pretarsus — terminal structure bearing claws and often pads.
The tarsus often ends with a pair of claws and pads (pulvilli or arolia) ensuring adhesion to surfaces (Pedigo, 2002; Zakhvatkin, 2001). In some insects (for example, in flies), glandular pads are developed under the claws, secreting a sticky substance that allows movement on smooth surfaces (Zakhvatkin, 2001).
Depending on lifestyle, insect legs acquire various specializations (Gullan, 2014; Zakhvatkin, 2001; Pedigo, 2002):
- Gressorial — the most common type, characteristic of most insects;
- Saltatorial — with strongly thickened femora of the hind legs (locusts, grasshoppers, fleas);
- Natatorial — with flattened tibiae and tarsi bearing swimming hairs (diving beetles, backswimmers);
- Fossorial — with widened and toothed tibiae of the front legs (mole crickets, dung beetles);
- Raptorial — with long and strong front legs bearing spines (mantises, some bugs);
- Collecting — with widened tibiae and tarsi bearing brushes for collecting pollen (bees, bumblebees).
Leg structure is an important feature for systematics. For example, the number of tarsal segments (tarsal formula) is often used to distinguish families of beetles (Pedigo, 2002).
Wings
Wings are the most characteristic feature of adult insects. They are located on the meso- and metathorax and represent outgrowths of the body integument (Gullan, 2014; Zakhvatkin, 2001). Wings arose only once in evolution — in the common ancestor of Pterygota (Gullan, 2014).
A typical wing consists of two thin membranes, between which veins pass — tubular thickenings giving the wing strength (Zakhvatkin, 2001; Pedigo, 2002). The veins contain tracheae, nerves, and hemolymph (Zakhvatkin, 2001). The arrangement of veins (venation) is extremely diverse and widely used in insect systematics (Gullan, 2014; Pedigo, 2002).
The main wing veins include (Gullan, 2014; Zakhvatkin, 2001):
- Costal (costa, C) — anterior marginal vein;
- Subcostal (subcosta, Sc) — following the costal;
- Radial (radius, R) — often branching;
- Medial (media, M) — located in the middle part of the wing;
- Cubital (cubitus, Cu) — behind the medial;
- Anal (analis, A) — in the posterior part of the wing.
Wing venation is one of the most important features for identifying orders and families of insects (Gullan, 2014; Pedigo, 2002). In different groups it undergoes significant changes: from complex reticulate venation in dragonflies and mayflies to strongly reduced venation in dipterans and hymenopterans (Zakhvatkin, 2001).
Insect wings undergo various modifications depending on function (Gullan, 2014; Pedigo, 2002; Zakhvatkin, 2001):
- Membranous — the most common type, characteristic of most insects;
- Scaled — covered with scales (butterflies);
- Elytra — hard, sclerotized anterior wings of beetles;
- Hemelytra — anterior wings of bugs, in which the base is hard and the apex membranous;
- Tegmina — leathery anterior wings of orthopterans and cockroaches;
- Halteres — modified hind wings of dipterans, serving as organs of balance.
The ability to fold wings along the body is a key feature of Neoptera (new-winged insects). In Palaeoptera (dragonflies and mayflies), the wings do not fold and remain permanently spread (Gullan, 2014; McGavin, 2022). This ability allowed Neoptera to colonize narrow spaces and became one of the prerequisites for their evolutionary success.
2.4. Abdomen
The abdomen is the third division of the insect body, containing internal organs and usually lacking locomotor limbs (Gullan, 2014; Zakhvatkin, 2001). In adult insects the abdomen consists of 6–11 segments, although in some groups the number of segments may be smaller (Pedigo, 2002).
Structure of the Abdomen
Each abdominal segment consists of a tergum (dorsal plate) and a sternum (ventral plate), connected by a lateral membrane (Gullan, 2014; Zakhvatkin, 2001). Unlike the thorax, the pleura of the abdomen are usually not developed or are represented by small sclerites.
On the sides of the abdominal segments are spiracles — openings of the tracheal system (Gullan, 2014; Pedigo, 2002). Usually spiracles are present on segments 1–8, but their number may vary (Gullan, 2014).
The abdomen does not bear true legs, but in some groups derivatives of them remain (Gullan, 2014; Zakhvatkin, 2001):
- Styli — rudimentary appendages in Archaeognatha and Zygentoma;
- Prolegs — fleshy outgrowths in butterfly caterpillars and sawfly larvae;
- Cerci — paired appendages on the last segment, performing a sensory function (Gullan, 2014; Zakhvatkin, 2001).
Genitalia and Their Significance
On the last abdominal segments are located the external genital organs (Gullan, 2014; Zakhvatkin, 2001). In females this is usually the ovipositor — a structure serving for laying eggs (Gullan, 2014). In males it is the copulatory organ (aedeagus) (Gullan, 2014; Pedigo, 2002).
The structure of the genitalia is extremely diverse and often species-specific. This makes them the most important feature for identifying species, especially in groups where external features of males and females are similar (Gullan, 2014; Pedigo, 2002). In some insects (for example, in butterflies), species identification without studying the genitalia is practically impossible (Gullan, 2014).
2.5. Why the Three-Tagma Structure Is a Key Feature of Insects
The three-tagma body structure — division into head, thorax, and abdomen — is one of the key features distinguishing insects from other arthropods (Gullan, 2014; Zakhvatkin, 2001). In millipedes the body is divided only into head and trunk; in arachnids into cephalothorax and abdomen; in crustaceans into cephalothorax and abdomen or into head, thorax, and abdomen, but the thorax often fuses with the head (Gullan, 2014; Hickman, 2015).
In insects each body division is specialized for performing certain functions (Zakhvatkin, 2001):
- Head — sensory and feeding center, bearing antennae, eyes, and mouthparts;
- Thorax — locomotor division, bearing legs and wings;
- Abdomen — container of internal organs, including digestive, excretory, and reproductive systems.
This specialization allowed insects to use environmental resources efficiently and became one of the prerequisites for their evolutionary success (Gullan, 2014).
In addition, the three-tagma structure provides insects with high mobility and maneuverability. The thorax, bearing powerful musculature for legs and wings, is separated from the abdomen, which allows the insect to move freely without affecting internal organs (Zakhvatkin, 2001).
2.6. Brief Reminder on Tagmosis
Tagmosis — the process of uniting segments into functional divisions — is one of the key evolutionary acquisitions of arthropods (Hickman, 2015; Miller, 2024). In different groups of arthropods it manifested differently: in crustaceans a cephalothorax formed, in arachnids a cephalothorax and abdomen, in millipedes a head and trunk, in insects a head, thorax, and abdomen (Gullan, 2014).
Tagmosis in insects reached its most complete expression: each body division is specialized for performing certain functions, and the segments forming the tagmata often fuse, forming solid structures (Zakhvatkin, 2001). This provides insects with high efficiency of movement, feeding, and reproduction.
3. Mouthparts of Insects
3.1. Introduction: Mouthparts as the Key to Understanding Insect Biology
The mouthparts of insects are perhaps one of the most important and most diverse structures in the entire animal world. They determine what and how an insect feeds on, and consequently its place in the ecosystem, its interactions with plants, animals, and humans. For an agronomist, understanding the structure of mouthparts is of particular importance: the type of damage a pest causes depends on its mouthparts, and therefore so does the strategy of plant protection (Pedigo, 2002).
Insect mouthparts demonstrate astonishing evolutionary plasticity. From a single initial plan — the chewing apparatus — dozens of modifications arose during evolution, adapted for feeding on the most varied substrates: from hard wood to nectar, from leaves to the blood of vertebrate animals. This plasticity became one of the key prerequisites for the evolutionary success of insects (Gullan, 2014; Zakhvatkin, 2001).
3.2. Chewing (Mandibulate) Mouthparts — the Original Type
The chewing mouthparts are considered the original, primitive type for all insects. They are characteristic of cockroaches, orthopterans (locusts, grasshoppers, crickets), beetles, butterfly caterpillars, and many other groups (Gullan, 2014; Zakhvatkin, 2001). It is precisely this type of mouthparts that allows insects to bite off and crush solid food — leaves, stems, wood, seeds, and animal tissues.
Main Components
The chewing mouthparts consist of five main components (Gullan, 2014; Pedigo, 2002; Zakhvatkin, 2001):
Upper lip (labrum) — an unpaired plate covering the mouth opening from above. It is not a modified limb, but an outgrowth of the head integument. On its inner surface are located sensory structures — the epipharynx (Zakhvatkin, 2001). The upper lip holds food and helps direct it into the mouth.
Mandibles — paired hard, often toothed jaws located behind the upper lip (Gullan, 2014). These are modified limbs of the fourth head segment. Mandibles have an incisor area for biting off and a molar area for crushing food (Pedigo, 2002). In herbivorous forms the mandibles are usually massive and toothed; in predatory forms they are sharp and sickle-shaped (Zakhvatkin, 2001).
Maxillae — paired structures located behind the mandibles. Each maxilla consists of several parts: cardo, stipes, lacinia, galea, and maxillary palp (Gullan, 2014; Zakhvatkin, 2001). The lacinia is a hard, often toothed structure holding food, while the galea is a soft lobe bearing sensory sensilla (Gullan, 2014). The palps perform a sensory function, assessing food quality (Pedigo, 2002).
Lower lip (labium) — an unpaired structure formed by the fusion of the second pair of maxillae (Gullan, 2014; Zakhvatkin, 2001). It covers the mouth opening from below and consists of the submentum, mentum, prementum, glossae, paraglossae, and labial palps (Zakhvatkin, 2001). The lower lip holds food and directs it into the mouth.
Hypopharynx — a tongue-like structure located in the preoral cavity between the upper and lower lips (Gullan, 2014; Zakhvatkin, 2001). It divides the preoral cavity into two parts: the cibarium, into which the pharynx opens, and the salivarium, into which the ducts of the salivary glands open (Zakhvatkin, 2001). The hypopharynx participates in moistening food with saliva and forming the food bolus.
Examples of the Chewing Type
The chewing mouthparts are characteristic of many groups of insects (Pedigo, 2002):
- Orthoptera — locusts, grasshoppers, crickets — use mandibles for biting off leaves and stems;
- Coleoptera — ground beetles, leaf beetles, weevils — crush food with powerful mandibles;
- Lepidoptera caterpillars — have typical chewing mouthparts, with which they eat leaves;
- Blattodea — omnivorous forms with chewing mouthparts;
- Termites (Blattodea: Termitoidae) — use mandibles for grinding wood.
In larvae of insects with complete metamorphosis (beetles, butterflies, hymenopterans), the mouthparts are usually of the chewing type, even if the adults feed on liquids (Zakhvatkin, 2001). For example, a butterfly caterpillar has chewing mouthparts, whereas the adult butterfly has siphoning mouthparts.
3.3. Piercing-Sucking Mouthparts
Piercing-sucking mouthparts represent one of the most significant modifications of the chewing type. They allow insects to pierce the integuments of plants or animals and suck out liquid food — plant juices, blood, tissues (Gullan, 2014; Pedigo, 2002). This type of mouthparts is characteristic of bugs (Hemiptera), aphids (Aphididae), mosquitoes (Culicidae), and many other groups.
Structure of Piercing-Sucking Mouthparts
The basis of piercing-sucking mouthparts is formed by thin, elongated stylets, which at rest are retracted into the head or lower lip (Gullan, 2014; Zakhvatkin, 2001). In bugs and aphids the stylets are formed by mandibles and maxillae, which fit tightly against each other, forming two canals: a food canal (for sucking food) and a salivary canal (for releasing saliva) (Pedigo, 2002; Zakhvatkin, 2001).
The lower lip does not participate in piercing, but forms a protective sheath — a case inside which the stylets slide (Zakhvatkin, 2001). In mosquitoes the lower lip also forms a groove in which the remaining mouthparts are located (Pedigo, 2002).
In mosquitoes the piercing-sucking apparatus includes six stylets: the upper lip (labrum), hypopharynx, a pair of mandibles, and a pair of maxillae (Gullan, 2014; Pedigo, 2002). The upper lip forms the food canal, and the hypopharynx forms the salivary canal (Pedigo, 2002). When biting, the mosquito pierces the victim's skin with the stylets, while the lower lip remains outside, serving as a support (Zakhvatkin, 2001).
Examples of the Piercing-Sucking Type
Piercing-sucking mouthparts are characteristic of the following groups (Pedigo, 2002; Zakhvatkin, 2001):
- Bugs (Hemiptera: Heteroptera) — bed bug, sunn pest, predatory bugs;
- Aphids (Hemiptera: Aphididae) — suck plant juices, often transmitting viral diseases;
- Cicadas, psyllids, whiteflies (Hemiptera: Auchenorrhyncha, Sternorrhyncha) — sucking plant juices;
- Mosquitoes (Diptera: Culicidae) — females suck the blood of vertebrates;
- Black flies (Diptera: Simuliidae) — blood-sucking;
- Horse flies (Diptera: Tabanidae) — blood-sucking;
- Fleas (Siphonaptera) — blood-sucking parasites;
- Lice (Psocodea: Anoplura) — blood-sucking parasites.
Piercing-sucking mouthparts are of enormous importance for humans and agriculture, since many of their possessors are vectors of dangerous diseases — malaria, yellow fever, encephalitis, viral diseases of plants (Pedigo, 2002; Zakhvatkin, 2001).
3.4. Sponging (Muscoid) Mouthparts
Sponging mouthparts are characteristic of flies (Diptera: Brachycera) and represent a highly specialized structure for feeding on liquid food (Pedigo, 2002; Zakhvatkin, 2001). In flies the mandibles and maxillae are reduced, and the lower lip is transformed into a soft proboscis with expanded lobes at the end — labella (Gullan, 2014; Pedigo, 2002).
Structure of Sponging Mouthparts
The fly proboscis consists of several parts (Pedigo, 2002):
- Rostrum — base of the proboscis;
- Haustellum — middle part;
- Labella — terminal lobes bearing numerous pseudotracheae — thin canals through which liquid is sucked.
When feeding, the fly applies the labella to the food surface, and the liquid rises through the canals into the food canal due to capillary forces and the action of the pharyngeal pump (Pedigo, 2002; Zakhvatkin, 2001). If the food is dry, the fly secretes saliva, which dissolves it (Zakhvatkin, 2001).
Examples of the Sponging Type
Sponging mouthparts are characteristic of (Pedigo, 2002):
- House fly (Musca domestica) — vector of intestinal infections;
- Stable fly (Stomoxys calcitrans) — a blood-sucking fly with piercing-sponging mouthparts;
- Tsetse fly (Glossina) — vector of sleeping sickness;
- Fruit flies (Tephritidae) — pests of fruit crops.
3.5. Siphoning (Proboscis) Mouthparts
Siphoning mouthparts are characteristic of butterflies and moths (Lepidoptera) and represent a long, spirally coiled proboscis formed by greatly elongated galeae of the maxillae (Gullan, 2014; Pedigo, 2002; Zakhvatkin, 2001). The mandibles and other components of the mouthparts in adult butterflies are usually reduced.
Structure of Siphoning Mouthparts
The butterfly proboscis is a hollow tube formed by two grooved galeae that fit tightly together, forming a food canal (Zakhvatkin, 2001). At rest the proboscis is coiled into a spiral due to the elasticity of the cuticle, but during feeding it unfolds by means of hemolymph pressure (Gullan, 2014; Zakhvatkin, 2001). Liquid (nectar, fruit juices) is sucked through the proboscis by means of a pharyngeal pump (Pedigo, 2002).
Examples of the Siphoning Type
Siphoning mouthparts are characteristic of (Pedigo, 2002):
- Butterflies (Papilionoidea) — diurnal butterflies feeding on nectar;
- Moths (various families of Lepidoptera) — nocturnal forms feeding on nectar, fruit juices, honeydew;
- Hawk moths (Sphingidae) — have a very long proboscis, allowing them to feed on nectar from flowers with deep corollas (Zakhvatkin, 2001).
Some butterflies (for example, vampire moths of the genus Calyptra) have a proboscis adapted for piercing the skin of vertebrates and feeding on blood (McGavin, 2022).
3.6. Chewing-Lapping Mouthparts
Chewing-lapping mouthparts are characteristic of bees, bumblebees, and wasps (Hymenoptera: Apoidea, Vespoidea) and represent a combination of chewing and lapping structures (Gullan, 2014; Pedigo, 2002; Zakhvatkin, 2001). The mandibles retain a chewing function and are used for building nests, crushing wax, and seizing prey. The maxillae and lower lip form a proboscis for sucking nectar (Zakhvatkin, 2001).
Structure of Chewing-Lapping Mouthparts
In the bee, the mandibles are hard, spoon-shaped structures used for working with wax and propolis (Pedigo, 2002). The maxillae and lower lip form a long proboscis, which at rest folds under the head (Zakhvatkin, 2001). The proboscis consists of elongated galeae forming a tube, and the lower lip with a terminal flabellum, which moistens nectar and directs it into the food canal (Zakhvatkin, 2001).
Examples of the Chewing-Lapping Type
Chewing-lapping mouthparts are characteristic of (Pedigo, 2002):
- Honey bee (Apis mellifera) — collects nectar and pollen;
- Bumblebees (Bombus) — pollinators;
- Solitary bees (various families of Apoidea) — pollinators;
- Wasps (Vespidae) — predators and pollinators.
3.7. Why the Diversity of Mouthparts Is Connected with the Diversity of Feeding
The diversity of insect mouthparts directly reflects the diversity of their feeding strategies. Each type of apparatus is adapted for feeding on a particular substrate (Gullan, 2014; Zakhvatkin, 2001):
- Chewing mouthparts allow feeding on solid food — leaves, stems, wood, seeds, animal tissues. They are characteristic of phytophages, saprophages, and predators.
- Piercing-sucking mouthparts allow piercing integuments and sucking out liquids — plant juices, blood, tissues. They are characteristic of parasites, blood-suckers, and sap-sucking phytophages.
- Sponging mouthparts allow feeding on liquid or semi-liquid food — nectar, decaying substrates, secretions. They are characteristic of flies.
- Siphoning mouthparts allow feeding on nectar and other liquids. They are characteristic of butterflies.
- Chewing-lapping mouthparts combine the functions of chewing and lapping, allowing feeding on nectar and pollen and using the mandibles for building. They are characteristic of bees.
Thus, mouthparts are the key to understanding the trophic relationships of insects and their role in ecosystems (Pedigo, 2002).
3.8. Why Mouthparts Are a Key Feature for Systematics
The structure of mouthparts is of enormous importance for insect systematics (Gullan, 2014; Zakhvatkin, 2001). This is connected with several reasons:
Stability within groups. Mouthparts are usually of the same type within large taxa — orders and families. For example, all bugs have piercing-sucking mouthparts, all butterflies have siphoning mouthparts, all flies have sponging mouthparts (Pedigo, 2002). This makes it easy to determine the belonging of an insect to a large group by the structure of the mouth organs.
Adaptive significance. The structure of the mouthparts is directly connected with lifestyle and feeding, which makes it an important ecological feature (Zakhvatkin, 2001).
Details of structure are species-specific. In some groups (for example, in dipterans), details of the structure of mouthparts, especially the palps and labella, are used to distinguish species and genera (Pedigo, 2002).
Evolutionary informativeness. Comparison of mouthparts of different groups allows reconstruction of evolutionary pathways and relationships (Gullan, 2014).
Thus, mouthparts are not only a functional, but also a most important taxonomic structure that must be taken into account when identifying insects.
4. Wings and Flight
4.1. Introduction: Wings as a Key Evolutionary Acquisition
Wings are, without exaggeration, the most significant evolutionary acquisition of insects. It was they that allowed this group to become the first group of animals in Earth's history to master active flight, and for more than 300 million years to remain the only flying invertebrates (Gullan, 2014; Zakhvatkin, 2001). Flight opened fundamentally new possibilities for insects: effective dispersal, colonization of new habitats, escape from predators, and use of food resources distributed in space (Pedigo, 2002).
It is no accident that the overwhelming majority of modern insects — more than 99% of species — belong to Pterygota, that is, to winged forms (Gullan, 2014; McGavin, 2022). Primarily wingless insects (Archaeognatha and Zygentoma) make up only about 1200 species, whereas winged insects number more than a million. This ratio eloquently testifies that wings became a key factor in the evolutionary success of Insecta.
4.2. Structure of the Wing
The wing of an insect is an outgrowth of the body integument located on the meso- and metathorax (Gullan, 2014; Zakhvatkin, 2001). Unlike the wings of birds and bats, which are modified forelimbs, insect wings are not homologous to legs — they are special structures formed by folds of the body wall (Gullan, 2014; McGavin, 2022).
Membrane and Veins
A typical wing consists of two thin membranes — upper and lower — between which a system of veins passes (Zakhvatkin, 2001; Pedigo, 2002). The wing membrane is formed by two layers of cuticle with a thin layer of hypodermis between them (Gullan, 2014). In the veins pass tracheae, nerves, and hemolymph, providing nutrition and innervation to the wing (Zakhvatkin, 2001).
Veins perform two main functions (Zakhvatkin, 2001):
- Mechanical — they give the wing rigidity and strength, similar to how spokes give rigidity to an umbrella;
- Aerodynamic — they distribute loads during flight and damp turbulent vortices.
In the most primitive winged insects (dragonflies, mayflies, lacewings), venation is dense, with numerous cross veins forming a network (archedictyon) (Zakhvatkin, 2001). In higher insects the number of veins decreases, and their arrangement becomes more specialized (Gullan, 2014).
Main Wing Veins
According to the generally accepted scheme, the insect wing contains the following main longitudinal veins (Gullan, 2014; Zakhvatkin, 2001; Pedigo, 2002):
- Costal vein (costa, C) — anterior marginal vein, usually the thickest;
- Subcostal vein (subcosta, Sc) — following the costal, often connected to it by a transverse humeral vein;
- Radial vein (radius, R) — often branching into the radial sector;
- Medial vein (media, M) — located in the middle part of the wing, often branching into anterior and posterior medial veins;
- Cubital vein (cubitus, Cu) — behind the medial, often branching;
- Anal veins (analis, A) — in the posterior part of the wing, may be numerous;
- Jugal vein (jugum, Ju) — the most posterior, not developed in all groups.
At the point where the subcosta joins the costa, a dense cuticular thickening — the pterostigma — is often formed (Zakhvatkin, 2001). This formation removes harmful vibration of the wing surfaces during flight, like a counterweight (Zakhvatkin, 2001).
Wing Cells
The spaces between veins are called cells (Gullan, 2014; Pedigo, 2002). Cells may be open (reaching the wing margin) or closed (completely surrounded by veins). The shape and arrangement of cells is an important feature for systematics, especially in hymenopterans and dipterans (Pedigo, 2002).
4.3. Wing Venation
Venation is the system of arrangement of veins on the wing (Gullan, 2014; Pedigo, 2002). It is extremely diverse in different groups of insects and is one of the most important features for identifying orders and families (Gullan, 2014; Zakhvatkin, 2001).
Types of Venation
Depending on complexity, several types of venation are distinguished (Zakhvatkin, 2001; Pedigo, 2002):
- Reticulate — with numerous cross veins forming a network (dragonflies, mayflies, lacewings);
- Membranous — with a relatively small number of veins and cells (most insects);
- Reduced — with strongly simplified venation (dipterans, hymenopterans).
In some groups venation is so specialized that it serves as a key feature for distinguishing even closely related species (Pedigo, 2002).
Evolutionary Trends in Venation
In the evolution of insect wings, two main trends are traced (Zakhvatkin, 2001):
Costalization — displacement of the main veins toward the anterior margin of the wing, which improves aerodynamic properties. Costalization is most strongly expressed in higher dipterans and hymenopterans (Zakhvatkin, 2001).
Dipterization — functional union of the fore and hind wings or reduction of one pair. In dipterans the hind wings are transformed into halteres; in hymenopterans the fore and hind wings are coupled into a single plane by means of special hooks — hamuli (Zakhvatkin, 2001; Pedigo, 2002).
4.4. Modifications of Wings
Insect wings undergo numerous modifications depending on lifestyle and functions performed (Gullan, 2014; Pedigo, 2002; Zakhvatkin, 2001).
Scales (Butterflies)
In butterflies and moths (Lepidoptera), the wings are covered with small scales, which are modified hairs (Gullan, 2014; Pedigo, 2002). The scales are arranged like roof tiles and may be pigmented or have a microscopic structure creating interference colors (Gullan, 2014).
Scales perform several functions (Gullan, 2014; Pedigo, 2002):
- Aerodynamic — they create a rough surface improving airflow;
- Thermoregulatory — they help retain heat;
- Protective — they provide camouflage or warning coloration;
- Communicative — they participate in visual signals during courtship.
The structure of scales is species-specific, which is used in systematics (Pedigo, 2002).
Elytra (Beetles)
In beetles (Coleoptera) the forewings are transformed into hard, sclerotized elytra, which at rest cover the folded hind wings (Gullan, 2014; Pedigo, 2002). Elytra do not participate in flight, but perform a protective function (Zakhvatkin, 2001).
In flight beetles use only the hind wings, which are usually longer and wider than the forewings (Pedigo, 2002). Before flight the beetle raises the elytra, freeing the hind wings (Zakhvatkin, 2001). In some groups (for example, in darkling beetles) the elytra may fuse, and such beetles lose the ability to fly (Gullan, 2014).
Hemelytra (Bugs)
In bugs (Hemiptera: Heteroptera) the forewings are transformed into hemelytra, in which the base is hard and sclerotized, and the apex is membranous (Gullan, 2014; Pedigo, 2002). This structure provides protection and at the same time retains flexibility for flight (Pedigo, 2002).
Hemelytra are usually divided into several parts: corium (main sclerotized part), clavus (posterior sclerotized part), and membrane (membranous apex) (Pedigo, 2002). In some bugs (for example, in the bed bug) the wings are reduced (Zakhvatkin, 2001).
Halteres (Dipterans)
In dipterans (Diptera) the hind wings are transformed into halteres — small club-shaped structures serving as organs of balance (Gullan, 2014; Pedigo, 2002). Halteres vibrate during flight at a frequency equal to the frequency of wing beats and provide stabilization of body position in the air (Zakhvatkin, 2001).
Halteres contain numerous sensilla — campaniform organs perceiving deformations of the cuticle during flight (Gullan, 2014). Signals from these sensilla pass directly to the wing muscles, providing automatic correction of flight (Gullan, 2014). This allows dipterans to perform complex maneuvers — hovering, backward flight, 360° turns (McGavin, 2022).
Other Modifications
Besides those listed, there are other modifications of wings (Pedigo, 2002; Zakhvatkin, 2001):
- Tegmina — leathery forewings of orthopterans, cockroaches, mantises, protecting the membranous hind wings;
- Pseudohomelytra — in some true bugs;
- Fringed wings — in thrips (Thysanoptera), with long hairs along the edges;
- Reduced wings — in parasitic forms (lice, fleas), as well as in some soil and cave insects.
4.5. Wing Folding: Neoptera vs Palaeoptera
One of the most important features dividing winged insects into two large groups is the ability to fold the wings along the body at rest (Gullan, 2014; McGavin, 2022).
Palaeoptera (Ancient-Winged)
Palaeoptera is the group including dragonflies (Odonata) and mayflies (Ephemeroptera). Their wings do not fold along the body, but remain spread at rest (Gullan, 2014; McGavin, 2022). This is connected with features of the wing articulation with the body: in Palaeoptera the wing plates are connected to the body rigidly, without movable axillary sclerites (Zakhvatkin, 2001).
The inability to fold the wings limits the possibilities of Palaeoptera in colonizing narrow spaces and makes them more vulnerable to predators (McGavin, 2022). This is precisely why Palaeoptera are few — about 5.5 thousand species (Gullan, 2014).
Neoptera (New-Winged)
Neoptera is the overwhelming majority of winged insects, including all other orders (Gullan, 2014; McGavin, 2022). Their wings are capable of folding along the body at rest thanks to the presence of movable axillary sclerites in the wing articulation with the body (Gullan, 2014).
The ability to fold the wings gave Neoptera enormous advantages (McGavin, 2022; Zakhvatkin, 2001):
- The possibility of colonizing narrow spaces (bark cracks, soil passages, leaf mines);
- Less vulnerability to predators at rest;
- More compact placement of wings, allowing smaller body sizes;
- The possibility of using wings for protection (for example, folding them under the elytra).
It is Neoptera that make up more than 99% of all modern insects (Gullan, 2014).
4.6. Why Flight Is a Key Factor in the Evolutionary Success of Insects
Flight became one of the most important factors determining the evolutionary success of insects (Gullan, 2014; Pedigo, 2002; Zakhvatkin, 2001). Let us consider the main advantages it gave.
Dispersal. Flight allowed insects to overcome barriers impassable for non-flying animals — rivers, mountains, deserts, seas (Pedigo, 2002). This contributed to the colonization of new habitats and the formation of broad ranges (Zakhvatkin, 2001).
Escape from predators. The ability to take off quickly and maneuver in the air is an effective means of protection from predators (McGavin, 2022). Many insects use flight for escape reactions (Gullan, 2014).
Use of distributed resources. Flight allows insects to use food resources that are distributed in space — flowers, fruits, leaves, carrion (Pedigo, 2002). This is especially important for pollinators and parasites (Gullan, 2014).
Search for a sexual partner. Flight facilitates the search for a partner, especially in species with pheromone communication (Gullan, 2014). Males of many insects actively fly in search of females (Zakhvatkin, 2001).
Colonization of new ecological niches. Flight opened the aerial environment to insects — a niche that had not been colonized before them (Zakhvatkin, 2001). This allowed them to occupy almost all available habitats on Earth (Gullan, 2014).
4.7. Why Venation Is an Important Feature for Systematics
Wing venation is one of the most important features used in insect systematics (Gullan, 2014; Pedigo, 2002; Zakhvatkin, 2001). This is connected with several reasons.
Stability within taxa. Venation is usually species-specific and stable within families and orders (Pedigo, 2002). For example, all representatives of the order Hymenoptera have characteristic venation with a small number of cells (Zakhvatkin, 2001).
Informativeness. Venation reflects evolutionary relationships between groups (Gullan, 2014). Comparison of venation allows reconstruction of phylogeny and determination of relationships (Pedigo, 2002).
Accessibility for study. Wings are often well preserved in fossil form, which makes venation an important feature for paleontology (Gullan, 2014).
Practicality. Venation is easy to observe and sketch, which makes it a convenient feature for identification (Pedigo, 2002).
This is why in insect identification keys wing venation occupies a central place (Zakhvatkin, 2001).
4.8. Brief Reminder on the Mechanism of Flight
Although a detailed examination of the mechanism of flight is beyond the scope of our course, it is necessary to mention the basic principles (Gullan, 2014; Zakhvatkin, 2001).
Insect flight is ensured by the work of wing muscles, which are divided into two groups (Zakhvatkin, 2001):
- Direct flight muscles — attach directly to the base of the wing and control its tilt;
- Indirect flight muscles — attach to the walls of the thoracic segment and change its shape, which leads to movement of the wings.
In more primitive insects (dragonflies, cockroaches, beetles), direct muscles predominate; in higher ones (dipterans, hymenopterans), indirect muscles predominate (Zakhvatkin, 2001). Indirect muscles allow reaching very high beat frequencies — up to 1000 per second in some mosquitoes (Miller, 2024; Hickman, 2015).
The wing trajectory during flight has a complex shape resembling a figure eight (Zakhvatkin, 2001). The alternation of elevator (lifting) and propelling (driving) strokes allows insects to perform complex maneuvers — hovering, backward flight, turns (Zakhvatkin, 2001).
5. Legs of Insects
5.1. Introduction: Legs as the Locomotor Apparatus
The legs of insects are paired segmented appendages located on the thoracic segments. There are always three pairs — one on the pro-, meso-, and metathorax, which gave the superclass its name Hexapoda (Gullan, 2014; Miller, 2024). It is the presence of three pairs of legs that is one of the key features distinguishing insects from other arthropods.
Legs perform many functions in insects: movement on a substrate, jumping, swimming, digging, seizing prey, collecting pollen. This functional plasticity makes legs the most important object of study both for understanding insect biology and for their identification (Gullan, 2014; Zakhvatkin, 2001).
5.2. Structure of a Typical Leg
A typical insect leg consists of six main segments, which from base to apex are arranged as follows (Gullan, 2014; Zakhvatkin, 2001; Pedigo, 2002):
Coxa — basal segment connecting the leg to the thorax. The coxa articulates with the pleurite of the thoracic segment by means of two condyles, which provides limited mobility (Zakhvatkin, 2001). In some insects (for example, in cockroaches) the coxa may be very large and contain powerful musculature (Pedigo, 2002).
Trochanter — a small segment located between the coxa and femur. The trochanter is usually movable relative to the femur and immovable relative to the coxa (Zakhvatkin, 2001). In some insects the trochanter may be divided into two subsegments (Gullan, 2014).
Femur — usually the largest and most powerful segment of the leg. The femur contains large muscles ensuring movement of the tibia (Zakhvatkin, 2001). In jumping insects (locusts, grasshoppers, fleas) the femur of the hind legs is strongly thickened and contains powerful musculature for jumping (Gullan, 2014; Pedigo, 2002).
Tibia — a long, usually thin segment following the femur. The tibia often bears spurs — hard outgrowths used for defense or digging (Zakhvatkin, 2001). In some groups (for example, in bees) the tibia of the hind legs is widened and bears special structures for collecting pollen (Gullan, 2014).
Tarsus — a segmented structure, usually consisting of 1–5 segments (tarsomeres). The tarsus provides additional flexibility of the leg and often bears structures for adhesion to surfaces (Gullan, 2014; Pedigo, 2002). The number of tarsal segments (tarsal formula) is an important feature for systematics, especially in beetles (Pedigo, 2002).
Pretarsus — the terminal structure located after the tarsus. The pretarsus usually bears a pair of claws, as well as various pads and empodium (Gullan, 2014; Zakhvatkin, 2001). Claws serve for adhesion to rough surfaces, while pads (pulvilli, arolia) provide attachment to smooth surfaces (Pedigo, 2002).
Pretarsal Structures
The pretarsus deserves special attention, since its structure is extremely diverse and has important adaptive significance (Gullan, 2014; Zakhvatkin, 2001).
Claws (ungues) — paired hard structures, usually curved. They provide adhesion to rough surfaces — soil, bark, leaves (Pedigo, 2002).
Pulvilli — paired soft pads located at the base of the claws. They secrete a sticky substance and allow insects to move on smooth surfaces such as glass (Zakhvatkin, 2001; Pedigo, 2002).
Arolium — an unpaired median pad located between the claws. May be absent in some groups (Gullan, 2014).
Empodium — an unpaired bristle-like or pad-like structure located between the claws. Characteristic of dipterans (Pedigo, 2002).
Of particular interest are the pretarsal structures of some bugs, for example Rhodnius prolixus, in which the pads are formed by many small hairs with obliquely cut apices (Zakhvatkin, 2001). These structures allow the bug to move freely on vertical smooth surfaces, but lose effectiveness when moving downward (Zakhvatkin, 2001).
5.3. Types of Legs and Their Specializations
Depending on lifestyle and functions performed, insect legs acquire various specializations. Let us consider the main types (Gullan, 2014; Zakhvatkin, 2001; Pedigo, 2002).
Walking (Running) Legs — gressorial, cursorial
The most common type of legs, characteristic of most insects. Walking legs are usually slender, with well-developed femur and tibia, adapted for movement on a substrate (Pedigo, 2002). Examples include ground beetles, cockroaches, and ants (Zakhvatkin, 2001).
In fast-running insects (ground beetles, cockroaches, ants) the legs are elongated and slender, which increases the speed of movement (Gullan, 2014). In slowly moving forms (caterpillars of some butterflies) the legs may be short and thick (Pedigo, 2002).
Jumping Legs — saltatorial
Jumping legs are characteristic of insects that use jumping as the main method of movement or escape from predators (Gullan, 2014; Zakhvatkin, 2001). The hind legs in such insects are strongly elongated, and the femur is thickened and contains powerful musculature (Pedigo, 2002).
Typical examples (Pedigo, 2002; Zakhvatkin, 2001):
- Locusts (Acrididae) — hind legs with powerful femora, allowing jumps up to 80 cm (McGavin, 2022);
- Grasshoppers (Tettigoniidae) — also have jumping hind legs;
- Fleas (Siphonaptera) — hind legs adapted for jumping, which can reach 30 cm in height (McGavin, 2022);
- Flea beetles (Chrysomelidae: Alticinae) — capable of jumping thanks to thickened hind femora.
The jumping mechanism differs in different groups. In locusts energy is stored in elastic structures of the knee joint and released when the tibia extends (McGavin, 2022). In fleas energy is stored in resilin — an elastic protein that is compressed when the leg bends and released during the jump (Gullan, 2014).
Swimming Legs — natatorial
Swimming legs are characteristic of aquatic insects (Gullan, 2014; Zakhvatkin, 2001). They are usually flattened and bear long swimming hairs that increase surface area (Pedigo, 2002).
Typical examples (Pedigo, 2002; Zakhvatkin, 2001):
- Diving beetles (Dytiscidae) — hind legs flattened and bearing swimming hairs;
- Backswimmers (Notonectidae) — hind legs transformed into oars;
- Water boatmen (Corixidae) — hind legs also adapted for swimming;
- Water scorpions (Nepidae) — have swimming legs.
In some aquatic insects (for example, in diving beetles) the swimming legs can fold and be used for walking on a substrate (Zakhvatkin, 2001).
Fossorial Legs — fossorial
Fossorial legs are characteristic of insects that dig in soil or other substrates (Gullan, 2014; Zakhvatkin, 2001). The front legs in such insects are widened, flattened, and often bear teeth or spurs for loosening the substrate (Pedigo, 2002).
Typical examples (Pedigo, 2002; Zakhvatkin, 2001):
- Mole crickets (Gryllotalpidae) — front legs strongly widened, with teeth, resembling claws;
- Dung beetles (Scarabaeidae) — front legs widened for digging;
- Soil beetles (Carabidae: some) — have fossorial front legs.
The mole cricket is a classic example of the fossorial type: its front legs are so specialized that they resemble the limbs of a mole (Zakhvatkin, 2001).
Raptorial Legs — raptorial
Raptorial legs are characteristic of predatory insects that use them for seizing and holding prey (Gullan, 2014; Zakhvatkin, 2001). The front legs in such insects are elongated and bear spines or teeth for holding the victim (Pedigo, 2002).
Typical examples (Pedigo, 2002; Zakhvatkin, 2001):
- Mantises (Mantodea) — front legs with long spines, fold like the blade of a penknife;
- Assassin bugs (Reduviidae) — front legs may be raptorial;
- Water scorpions (Nepidae) — front legs raptorial;
- Some lacewings (Neuroptera: Mantispidae) — front legs raptorial.
In mantises the raptorial apparatus is especially perfect: the femur and tibia fold, forming a reliable lock for holding prey (Zakhvatkin, 2001).
Collecting Legs — collecting
Collecting legs are characteristic of bees and bumblebees (Hymenoptera: Apoidea), which use them for collecting pollen (Gullan, 2014; Zakhvatkin, 2001). The hind legs in such insects bear special structures for collecting and transporting pollen.
In the honey bee (Apis mellifera) the hind legs have:
- Pollen basket (corbicula) — a widened area on the tibia surrounded by long hairs;
- Scopa — dense hairs on the inner side of the tarsus;
- Rake — a structure for cleaning pollen from the body (Gullan, 2014; Pedigo, 2002).
In bumblebees the collecting structures are similar, but may differ in details (Zakhvatkin, 2001).
Other Specializations
Besides those listed, there are other specializations of legs (Pedigo, 2002; Zakhvatkin, 2001):
- Suctorial legs — in males of some diving beetles, with widened tarsi for holding the female during mating;
- Clasping legs — in parasitic forms (lice, chewing lice) with claws for holding onto hairs or feathers;
- Reduced legs — in larvae of some insects (for example, in fly larvae legs are absent).
5.4. Why Leg Specialization Is Connected with Lifestyle
Leg specialization directly reflects the lifestyle of an insect and its ecological niche (Gullan, 2014; Zakhvatkin, 2001). This connection is so close that by the structure of the legs one can often determine where and how an insect lives.
Jumping legs indicate that the insect lives in grassy vegetation or open spaces, where jumping is an effective method of movement and escape from predators (McGavin, 2022). Locusts, grasshoppers, and fleas are classic examples.
Swimming legs indicate an aquatic lifestyle (Pedigo, 2002). Diving beetles, backswimmers, and water boatmen all live in water bodies.
Fossorial legs are characteristic of soil insects (Zakhvatkin, 2001). Mole crickets, dung beetles, and some ground beetles dig soil for feeding or shelter.
Raptorial legs are a sign of predators that ambush prey (Pedigo, 2002). Mantises, predatory bugs, and some lacewings use them for seizing prey.
Collecting legs are a characteristic feature of pollinators feeding on pollen and nectar (Gullan, 2014). Bees, bumblebees, and some wasps.
Thus, leg structure is not simply a morphological detail, but the key to understanding the ecology and behavior of an insect (Zakhvatkin, 2001).
5.5. Why Leg Structure Is an Important Feature for Systematics
Leg structure is widely used in insect systematics (Gullan, 2014; Pedigo, 2002; Zakhvatkin, 2001). This is connected with several reasons.
Stability within taxa. The number of tarsal segments (tarsal formula), the presence or absence of spurs, and the structure of pretarsal structures are all usually stable within families and genera (Pedigo, 2002). For example, in beetles the tarsal formula 5-5-5 is characteristic of most families, but in some groups it may be 5-5-4 or 4-4-4 (Pedigo, 2002).
Informativeness. Leg structure reflects adaptations to a certain lifestyle and, consequently, evolutionary relationships between groups (Gullan, 2014).
Accessibility for study. Legs are usually well preserved in collections and easily accessible for study (Pedigo, 2002).
Practicality. Many identification keys are built on features of leg structure — the number of tarsal segments, the shape of the femur and tibia, and the presence of spurs (Zakhvatkin, 2001).
5.6. Brief Reminder on Leg Muscles
Movement of the legs is ensured by a complex system of muscles, which are divided into two groups (Zakhvatkin, 2001):
Muscles located in the body — ensure movement of the leg as a whole (for example, abduction and adduction of the coxa);
Muscles located in the leg itself — ensure movement of individual segments (for example, flexion and extension of the tibia).
In jumping insects (locusts, grasshoppers) the muscles of the hind legs make up a significant part of the body mass and provide enormous jumping force (Zakhvatkin, 2001). In fleas the muscles of the hind legs are also very powerful, and energy is stored in elastic structures (Gullan, 2014).
6. Integument and Molting
6.1. Introduction: Integument as a Key Adaptation of Insects
The body integument — or integument — represents one of the most important and characteristic structures of insects. It is the integument that provides mechanical protection, prevents water loss, serves as the site of muscle attachment, and performs many other functions (Gullan, 2014; Zakhvatkin, 2001). It would not be an exaggeration to say that the evolutionary success of insects is largely connected with the perfection of their integument.
However, the integument has one fundamental limitation: it is not capable of stretching. This means that for growth an insect must periodically shed the old integument and replace it with a new, larger one. This process is called molting (ecdysis) and is one of the most characteristic and important biological processes in insects (Gullan, 2014; Pedigo, 2002).
6.2. Structure of the Cuticle
The integument of an insect consists of two main components: living tissue — the epidermis — and a nonliving outer layer — the cuticle (Gullan, 2014; Zakhvatkin, 2001).
Epidermis
The epidermis is a single-layer epithelium underlain by a basement membrane (Zakhvatkin, 2001). The epidermal cells are uninucleate and bear numerous microvilli on their surface (Gullan, 2014). It is the epidermis that secretes the cuticle and controls all processes connected with its formation and molting (Zakhvatkin, 2001).
The epidermis also contains specialized cells (Gullan, 2014; Zakhvatkin, 2001):
- Oenocytes — large secretory cells participating in the synthesis of lipids and cuticular proteins;
- Glandular cells — form epidermal glands secreting wax, cement, and other substances;
- Trichogen and tormogen cells — form sensilla (hairs, bristles);
- Sensory neurons — connected with sensilla and providing perception of external stimuli.
Cuticle
The cuticle is a nonliving formation secreted by the epidermis. It covers the entire body of the insect, and also lines the foregut and hindgut, tracheae, and some other internal structures (Gullan, 2014; Zakhvatkin, 2001).
The cuticle consists of several layers, which from outer to inner are arranged as follows (Gullan, 2014; Zakhvatkin, 2001; McGavin, 2022):
Epicuticle — a thin outer layer, 1–4 μm thick. It does not contain chitin and consists of lipoproteins and waxes (Gullan, 2014; Zakhvatkin, 2001). The epicuticle is subdivided into several sublayers (Gullan, 2014):
- Inner epicuticle — a layer of lipoproteins;
- Outer epicuticle (cuticulin layer) — a layer of cuticulin resistant to enzymes;
- Wax layer — a thin layer of lipids and waxes providing waterproofing;
- Cement layer — an outer protective layer secreted by dermal glands.
It is the wax layer of the epicuticle that provides insects with the ability to retain water in terrestrial conditions (Gullan, 2014; Zakhvatkin, 2001). Without this layer insects would quickly die from desiccation. The wax layer may increase in thickness under dry conditions or decrease under humid conditions (Gullan, 2014).
Procuticle — the main layer of the cuticle in thickness, containing chitin in complex with proteins (Gullan, 2014; Zakhvatkin, 2001). The procuticle is subdivided into two sublayers:
- Exocuticle — outer sublayer secreted before molting. It is usually sclerotized (hard and dark) and provides strength to the cuticle (Gullan, 2014; Zakhvatkin, 2001).
- Endocuticle — inner sublayer secreted after molting. It is less sclerotized and more flexible (Gullan, 2014; Zakhvatkin, 2001).
The procuticle is penetrated by numerous pore canals, through which transport of substances from the epidermis to the cuticle surface occurs (Gullan, 2014; Zakhvatkin, 2001).
Chitin
Chitin is a high-molecular-weight nitrogen-containing polysaccharide consisting of residues of N-acetyl-D-glucosamine linked by β-(1→4)-glycosidic bonds (Gullan, 2014; Zakhvatkin, 2001). In structure chitin is close to cellulose, but contains nitrogen (Zakhvatkin, 2001).
Chitin is insoluble in water, alkalis, and organic solvents. It decomposes only in strong inorganic acids, and upon prolonged heating with potassium hydroxide is partially converted into chitosan (Zakhvatkin, 2001). In nature chitin is decomposed only by a few species of bacteria and fungi that secrete the enzyme chitinase (Zakhvatkin, 2001).
Chitin molecules form microfibrils that are embedded in a protein matrix (Gullan, 2014). This structure provides the cuticle with high strength and elasticity (Gullan, 2014). Chitin is synthesized in the insect body, apparently from glucose (Zakhvatkin, 2001).
Sclerotization
Sclerotization is the process of hardening of the cuticle, in which cuticular proteins are cross-linked to each other by quinones (Gullan, 2014; Zakhvatkin, 2001). This process is irreversible and leads to the formation of hard, insoluble exocuticle (Gullan, 2014).
Sclerotization may be accompanied by darkening of the cuticle (Gullan, 2014). However, darkening is not always connected with sclerotization: pigmentation may occur independently (Gullan, 2014).
Sclerotization is characteristic of the hard parts of the insect body — head capsule, mandibles, beetle elytra, leg coxae (Zakhvatkin, 2001). In soft parts of the body (intersegmental membranes, joints) the cuticle remains unsclerotized and flexible (Gullan, 2014).
6.3. Molting
Molting is the process of shedding the old cuticle and replacing it with a new, larger one (Gullan, 2014; Pedigo, 2002). Molting is necessary for growth, since the cuticle is not capable of stretching (Zakhvatkin, 2001).
Phases of Molting
Molting includes several successive phases (Gullan, 2014; Zakhvatkin, 2001; McGavin, 2022):
Apolysis — separation of the epidermis from the old cuticle. The epidermis begins to secrete enzymes (chitinase and proteases) that dissolve the inner layers of the old cuticle (Gullan, 2014; McGavin, 2022).
Formation of the new cuticle — the epidermis secretes the new epicuticle, and then the procuticle (McGavin, 2022). The new epicuticle protects the forming cuticle from the action of enzymes dissolving the old one (Gullan, 2014).
Ecdysis — shedding of the remains of the old cuticle. The insect ruptures the old cuticle along lines of weakness (sutures), usually on the head or thorax, and crawls out of it (McGavin, 2022). During this, the insect increases in size by swallowing air or water (Gullan, 2014; Pedigo, 2002).
Postecdysis — the period after molting during which the new cuticle hardens (sclerotizes) and becomes pigmented (McGavin, 2022). During this time the insect is especially vulnerable, since its integument is still soft (Pedigo, 2002).
Hormonal Regulation of Molting
Molting is regulated by a complex system of hormones (Gullan, 2014; Pedigo, 2002; Randall, 2001). The main hormones participating in this process (Randall, 2001; Pedigo, 2002):
Prothoracicotropic hormone (PTTH) — a neurohormone secreted by neurosecretory cells of the brain. It stimulates the prothoracic glands to synthesize ecdysone (Randall, 2001; Pedigo, 2002).
Ecdysone — a steroid hormone secreted by the prothoracic glands. It triggers the molting process, stimulating epidermal cells to form a new cuticle (Randall, 2001; Pedigo, 2002). Ecdysone is converted into its active form — 20-hydroxyecdysone (β-ecdysone) — in peripheral tissues (Randall, 2001).
Juvenile hormone (JH) — secreted by the corpora allata. It determines the nature of molting: at a high level of JH, molting occurs to the next larval stage; at a low level, to the pupa or adult (Randall, 2001; Pedigo, 2002).
Eclosion hormone — a neurohormone secreted by neurosecretory cells of the brain. It triggers behavioral reactions connected with emergence from the old cuticle (Randall, 2001; Pedigo, 2002).
Bursicon — a neurohormone secreted by neurosecretory cells of the ventral nerve cord. It stimulates sclerotization and pigmentation of the new cuticle after molting (Randall, 2001).
Stages and Instars
The period between two molts is called a stadium, and the state of the insect during this period is called an instar (Pedigo, 2002; Zakhvatkin, 2001). The number of instars varies in different groups: in some insects there are only 3–4, in others up to 30 or more (Zakhvatkin, 2001).
In insects with complete metamorphosis (Holometabola), the number of larval instars is usually 3–5, after which the pupal stage follows (Pedigo, 2002). In insects with incomplete metamorphosis (Hemimetabola), the number of nymphal instars may reach 5–6 or more (Pedigo, 2002).
6.4. Why Molting Is Necessary for Growth
Molting is necessary for insects for the simple reason that their cuticle is not capable of stretching (Gullan, 2014; Zakhvatkin, 2001). No matter how much the insect grows inside, its external skeleton remains unchanged. Therefore, periodically the insect must shed the old integument and replace it with a new, larger one (Pedigo, 2002).
This process can be compared to changing clothes in a growing child: the child grows continuously, but clothes must be changed periodically, and each time to a larger size (Gullan, 2014). In insects this “clothing” — the cuticle — is replaced during molting.
Each molt allows the insect to increase in size. The amount of increase (molt increment) is usually from 1.2 to 1.7 times in linear dimensions (Pedigo, 2002). In some insects (for example, in locusts) the increase may be significant, in others minimal.
6.5. Why Molting Is a Vulnerable Period
Molting is a critical period in the life of an insect, when it is especially vulnerable (Gullan, 2014; Pedigo, 2002; Zakhvatkin, 2001). The causes of this vulnerability are numerous.
Soft integument. Immediately after molting, the new cuticle is still soft and not sclerotized. For several hours (and sometimes days) the insect has no effective mechanical protection (McGavin, 2022).
Limited mobility. During molting the insect often cannot move or moves with difficulty. It cannot escape from predators or obtain food (Pedigo, 2002).
Water loss. The new cuticle does not yet have a full wax layer, which makes the insect vulnerable to desiccation (Gullan, 2014).
Vulnerability to parasites. During molting the insect becomes easy prey for parasites and parasitoids (Zakhvatkin, 2001).
This is why many insects molt in shelters — in soil, under bark, in leaf mines, in nests (Pedigo, 2002). This allows them to survive the most dangerous period.
6.6. Brief Reminder on Cuticle and Molting
Let us summarize. The cuticle is the external skeleton of an insect, providing protection, support, and prevention of water loss (Gullan, 2014; Zakhvatkin, 2001). It consists of the epicuticle (outer layer containing wax) and the procuticle (main layer containing chitin) (Zakhvatkin, 2001).
Molting is the process of shedding the old cuticle and replacing it with a new one, necessary for growth (Pedigo, 2002). Molting is regulated by hormones: PTTH, ecdysone, juvenile hormone, and others (Randall, 2001). Molting is a vulnerable period, so insects often molt in shelters (Pedigo, 2002).
Understanding the structure of the cuticle and the process of molting has important practical significance. Many insecticides act precisely on these processes — for example, chitin synthesis inhibitors disrupt cuticle formation, and juvenile hormone analogs prevent normal metamorphosis (Pedigo, 2002).
7. Development: Types of Metamorphosis
7.1. Introduction: Metamorphosis as a Key Concept
The development of insects is a process that proceeds differently in different groups. In some insects the young individuals resemble the adults, in others they differ radically from them. These differences lie at the basis of one of the most important concepts of entomology — the concept of metamorphosis (Gullan, 2014; Zakhvatkin, 2001).
Metamorphosis (from Greek μεταμόρφωσις — transformation) is the totality of changes that an organism undergoes from the moment of hatching from the egg until reaching sexual maturity (Gullan, 2014; Pedigo, 2002). In insects three main types of metamorphosis are distinguished: ametaboly (without metamorphosis), hemimetaboly (incomplete metamorphosis), and holometaboly (complete metamorphosis) (Gullan, 2014; McGavin, 2022).
Understanding the types of metamorphosis is of fundamental importance for entomology. First, it allows understanding how insects colonize different ecological niches. Second, knowledge of metamorphosis is necessary for identifying insects and understanding their life cycles. Third, metamorphosis lies at the basis of practical strategies for plant protection: different developmental stages of a pest may require different control measures (Pedigo, 2002).
7.2. Ametaboly (Without Metamorphosis)
Ametaboly is the most primitive type of development, in which young individuals practically do not differ from adults, except in size and degree of development of the reproductive system (Gullan, 2014; Zakhvatkin, 2001).
Characteristics of Ametaboly
In ametaboly, an individual hatches from the egg that looks like a miniature copy of the adult insect (McGavin, 2022). Such young individuals are called juveniles, not larvae or nymphs (Pedigo, 2002). They lead the same lifestyle as adults, feed on the same food, and inhabit the same habitats (Zakhvatkin, 2001).
The main feature of ametaboly is the absence of a sharp change in body form during the transition from the juvenile to the adult stage (Gullan, 2014). The only changes are an increase in size and development of the reproductive organs. At the same time, insects continue to molt even after reaching sexual maturity (McGavin, 2022).
Examples of Ametaboly
Ametaboly is characteristic of primarily wingless insects — the orders Archaeognatha (bristletails) and Zygentoma (silverfish) (Gullan, 2014; McGavin, 2022). These groups are few — about 600 species each (McGavin, 2022).
Bristletails (Archaeognatha) are small insects with an elongated body covered with scales (McGavin, 2022). They live in soil, forest litter, and under stones. Silverfish (Zygentoma) are flatter insects, often found in houses (for example, the sugar silverfish) (McGavin, 2022).
Ametaboly is considered the most primitive type of development, preserved in insects from ancient times (Zakhvatkin, 2001). It is also characteristic of some other arthropods — for example, millipedes (Gullan, 2014).
7.3. Hemimetaboly (Incomplete Metamorphosis)
Hemimetaboly is a type of development in which an individual hatches from the egg resembling the adult, but differing from it by the absence of wings and an undeveloped reproductive system (Gullan, 2014; Zakhvatkin, 2001).
Characteristics of Hemimetaboly
In hemimetaboly the life cycle includes three main stages: egg → nymph → adult (imago) (Pedigo, 2002). Nymphs are young individuals that resemble adults but do not have fully developed wings and reproductive organs (Gullan, 2014).
Wings in nymphs develop gradually, increasing in size with each molt (Zakhvatkin, 2001). In young nymphs wings are absent; in older ones wing pads appear, which become larger with each molt (Pedigo, 2002). At the final molt the wings reach full development, and the insect becomes an adult (imago) (McGavin, 2022).
Nymphs usually lead the same lifestyle as adults, feed on the same food, and inhabit the same habitats (Zakhvatkin, 2001). However, in some groups (for example, in dragonflies and mayflies) nymphs live in water, while adults live on land (Pedigo, 2002).
Examples of Hemimetaboly
Hemimetaboly is characteristic of many groups of insects (Pedigo, 2002; Zakhvatkin, 2001):
- Orthoptera — locusts, grasshoppers, crickets;
- Blattodea — including termites;
- Mantodea;
- Hemiptera — sunn pest, bed bug;
- Cicadas, aphids, psyllids (Hemiptera: Auchenorrhyncha, Sternorrhyncha);
- Odonata — with aquatic nymphs (naiads);
- Ephemeroptera — with aquatic nymphs (naiads);
- Plecoptera — with aquatic nymphs.
In aquatic forms (dragonflies, mayflies, stoneflies), the nymphs are called naiads and have special adaptations for life in water — tracheal gills, the mask in dragonflies (Pedigo, 2002; Zakhvatkin, 2001).
Features of Hemimetaboly
In hemimetaboly, nymphs and adults often compete for food and habitats, since they lead a similar lifestyle (Gullan, 2014). This is one of the limitations of hemimetaboly compared with holometaboly (McGavin, 2022).
However, in some groups (dragonflies, mayflies) nymphs and adults occupy different ecological niches — aquatic and terrestrial, respectively — which reduces competition (Pedigo, 2002).
7.4. Holometaboly (Complete Metamorphosis)
Holometaboly is the most advanced type of development, in which the life cycle includes four stages: egg → larva → pupa → adult (Gullan, 2014; Pedigo, 2002).
Characteristics of Holometaboly
In holometaboly, a larva hatches from the egg, which differs radically from the adult in structure, lifestyle, and feeding (Gullan, 2014; Zakhvatkin, 2001). Larvae are usually worm-like, lack wings and compound eyes, and have chewing mouthparts (Pedigo, 2002).
After several molts the larva turns into a pupa — a stage that is usually immobile and does not feed (Gullan, 2014). Inside the pupa the organism is reorganized: larval tissues are destroyed (histolysis), and adult structures are formed from imaginal discs (histogenesis) (Pedigo, 2002; Zakhvatkin, 2001).
After completion of metamorphosis, the adult (imago) emerges from the pupa (Gullan, 2014). The adult insect no longer molts or grows (McGavin, 2022).
Types of Pupae
Insect pupae differ in structure (Pedigo, 2002; Zakhvatkin, 2001):
- Exarate pupae — appendages (wings, legs, antennae) protrude freely from the body (beetles, lacewings);
- Obtect pupae — appendages are fused to the body (butterflies);
- Coarctate pupae — the pupa is located inside a false cocoon — a puparium formed by the last larval skin (flies).
Types of Larvae
The larvae of insects with complete metamorphosis are extremely diverse (Pedigo, 2002; Zakhvatkin, 2001):
- Polypod (caterpillars) — with three pairs of thoracic legs and several pairs of abdominal prolegs (butterflies, sawflies);
- Oligopod — with three pairs of thoracic legs, without abdominal legs (beetles, lacewings);
- Apodous — without legs (flies, bees, some beetles).
Examples of Holometaboly
Holometaboly is characteristic of the most numerous orders of insects (Pedigo, 2002; Zakhvatkin, 2001):
- Coleoptera — the largest order;
- Lepidoptera — the second most numerous order;
- Diptera — flies, mosquitoes;
- Hymenoptera — bees, wasps, ants;
- Trichoptera;
- Neuroptera;
- Siphonaptera.
7.5. Why Holometaboly Is Considered the Most Advanced Type
Holometaboly is considered the most advanced type of metamorphosis for several reasons (Gullan, 2014; Zakhvatkin, 2001).
Separation of ecological niches. Larvae and adults occupy different ecological niches without competing with each other (Gullan, 2014; Pedigo, 2002). For example, a butterfly caterpillar feeds on leaves, while the adult butterfly feeds on nectar. A fly larva lives in a decaying substrate, while the adult fly feeds on nectar or blood (Zakhvatkin, 2001).
Specialization of stages. Larvae are specialized for feeding and growth, adults for reproduction and dispersal (Gullan, 2014). This allows each stage to perform its function as effectively as possible (Pedigo, 2002).
Protection from unfavorable conditions. The pupa often serves as a stage for surviving unfavorable conditions — winter diapause, drought (Pedigo, 2002; Zakhvatkin, 2001). In the pupal state the insect is protected from many dangers.
Reduced competition. Since larvae and adults do not compete for food, the population can be more numerous (Gullan, 2014). This is one of the reasons why holometabolous insects dominate in most ecosystems (McGavin, 2022).
7.6. Why Holometabola Is the Most Numerous Group of Insects
Holometabola (insects with complete metamorphosis) make up about 80% of all known insect species (Gullan, 2014; Pedigo, 2002). Their numerical superiority is explained by several factors.
Separation of niches. Larvae and adults occupy different niches, which allows the species to use more resources (Gullan, 2014; Pedigo, 2002).
High survival. The pupa is protected from many dangers, which increases survival (Pedigo, 2002).
Rapid development. Holometabolous insects often develop faster than hemimetabolous ones, which allows them to produce more generations per year (Zakhvatkin, 2001).
Adaptability. Holometaboly allows rapid adaptation to changing conditions (Gullan, 2014). For example, larvae can adapt to different food substrates, and adults to different methods of dispersal.
It is these advantages that made Holometabola the dominant group of insects in most terrestrial and freshwater ecosystems (McGavin, 2022).
7.7. Brief Reminder on Metamorphosis
Let us summarize. Metamorphosis is the totality of changes that an insect undergoes from hatching from the egg to sexual maturity (Gullan, 2014; Pedigo, 2002). Three main types of metamorphosis are distinguished:
Ametaboly — without metamorphosis, juvenile individuals resemble adults (Archaeognatha, Zygentoma) (McGavin, 2022).
Hemimetaboly — incomplete metamorphosis: egg → nymph → adult (orthopterans, bugs, dragonflies) (Pedigo, 2002).
Holometaboly — complete metamorphosis: egg → larva → pupa → adult (beetles, butterflies, flies, hymenopterans) (Pedigo, 2002).
Holometaboly is considered the most advanced type, since it allows separation of the ecological niches of larvae and adults, reduces competition, and increases survival (Gullan, 2014). It is holometabolous insects that make up the majority of modern species (McGavin, 2022).
8. Life Cycles and Diapause
8.1. Introduction: Life Cycle and Seasonal Cycle
Until now we have examined the structure and development of insects without connection to the annual cycle of nature. However, in reality the life of any insect proceeds under conditions of changing seasons — winter and summer, rainy and dry periods. The ability to synchronize its life cycle with these changes is one of the key conditions of survival (Gullan, 2014; Pedigo, 2002).
Two interrelated concepts are used to describe this synchronization (Pedigo, 2002):
Life cycle — the sequence of biological events occurring during the life of one individual: from egg to adult stage laying eggs. The life cycle fits within the framework of one generation (Pedigo, 2002).
Seasonal cycle — the sequence of life cycles of a species during one year. The seasonal cycle may include one or several generations (Pedigo, 2002; Zakhvatkin, 2001).
Understanding life cycles and seasonal cycles is of fundamental importance for entomology, especially for forecasting pest outbreaks. Without knowledge of when and in what stage an insect survives the unfavorable period, it is impossible to plan protective measures correctly (Pedigo, 2002).
8.2. Voltinism: Number of Generations per Year
The number of generations a species produces per year is called voltinism (Gullan, 2014; Pedigo, 2002). On this basis several types of life cycles are distinguished.
Univoltine Species
Univoltine species produce one generation per year (Pedigo, 2002; Zakhvatkin, 2001). This is characteristic of many insects of temperate latitudes, especially those whose resources are available only during a limited season (Gullan, 2014).
Typical examples of univoltine species (Pedigo, 2002):
- Colorado potato beetle (Leptinotarsa decemlineata) — produces one generation in the northern parts of its range;
- Many locusts — in temperate latitudes;
- Corn rootworm (Diabrotica) — in northern regions;
- Codling moth (Cydia pomonella) — in the northern parts of its range.
In univoltine species all individuals of the population develop synchronously, which facilitates forecasting their numbers (Pedigo, 2002).
Multivoltine Species
Multivoltine (polyvoltine) species produce two or more generations per year (Gullan, 2014; Pedigo, 2002). The number of generations may vary from two to several dozen depending on climatic conditions (Zakhvatkin, 2001).
Typical examples of multivoltine species (Pedigo, 2002; Zakhvatkin, 2001):
- House fly (Musca domestica) — up to 10–12 generations per year in warm conditions;
- Aphids (Aphididae) — up to 20 or more generations per year;
- Spider mite (Tetranychus urticae) — up to 20 generations per year;
- Colorado potato beetle — in the southern parts of its range produces 2–3 generations.
In multivoltine species generations may overlap, which complicates their study and forecasting (Pedigo, 2002). By the end of the season all developmental stages may be present simultaneously in the population (Zakhvatkin, 2001).
Semivoltine and Delayed-Voltine Species
Some insects require more than one year to complete their life cycle (Pedigo, 2002; Zakhvatkin, 2001). Such species are called semivoltine or species with delayed voltinism (Pedigo, 2002).
Typical examples (Pedigo, 2002):
- May beetles (Melolontha) — larvae develop for 3–5 years;
- Wireworms (Elateridae) — larvae develop for 2–5 years;
- Periodical cicadas (Magicicada) — larvae develop for 13 or 17 years (Gullan, 2014; McGavin, 2022);
- Some longhorn beetles (Cerambycidae) — larval development in wood may take more than 20 years (Gullan, 2014).
In such species generations overlap, and at any moment individuals of different ages are present in the population (Pedigo, 2002). This creates significant difficulties for forecasting their numbers (Zakhvatkin, 2001).
8.3. Diapause: Definition and Significance
Diapause is a state of physiological rest into which an insect enters to survive unfavorable conditions (Gullan, 2014; Pedigo, 2002). Unlike simple quiescence, which arises as an immediate reaction to unfavorable conditions and ceases when they improve, diapause is a programmed state that does not cease immediately when favorable conditions occur (Pedigo, 2002; Zakhvatkin, 2001).
Diapause is a key adaptation of insects allowing them to synchronize their life cycle with seasonal changes in the environment (Gullan, 2014). It is characteristic of the overwhelming majority of insects of temperate latitudes and many tropical species (Zakhvatkin, 2001).
Differences Between Diapause and Quiescence
It is important to clearly distinguish diapause and quiescence (Pedigo, 2002):
Quiescence is an immediate reaction to unfavorable conditions. As soon as conditions improve, the insect returns to normal life activity. For example, an insect may enter quiescence when temperature drops, but become active at the first warming (Pedigo, 2002).
Diapause is a state that is triggered in advance, before the onset of unfavorable conditions. Even if conditions temporarily improve, an insect in diapause does not become active. To exit diapause a special signal is required — for example, prolonged exposure to cold (Pedigo, 2002; Gullan, 2014).
Types of Diapause by Developmental Stage
Diapause may occur at different stages of the life cycle (Pedigo, 2002; Zakhvatkin, 2001):
Embryonic diapause — at the egg stage. Characteristic of many locusts, aphids, and some butterflies (Pedigo, 2002). For example, locust eggs enter diapause for the winter (Zakhvatkin, 2001).
Larval diapause — at the larval stage. Characteristic of many beetles, butterflies, and sawflies (Pedigo, 2002). For example, larvae of the European corn borer (Ostrinia nubilalis) overwinter in corn stalks (Pedigo, 2002).
Pupal diapause — at the pupal stage. Characteristic of many butterflies, dipterans, and hymenopterans (Pedigo, 2002). For example, pupae of many noctuids overwinter in the soil (Zakhvatkin, 2001).
Imaginal diapause — at the adult stage. Characteristic of the Colorado potato beetle, many bugs, and some butterflies (Pedigo, 2002). In imaginal diapause the adult insect does not reproduce, but survives the unfavorable conditions (Zakhvatkin, 2001).
Summer and Winter Diapause
Diapause may be summer (aestivation) or winter (hibernation) (Pedigo, 2002; Zakhvatkin, 2001).
Summer diapause (aestivation) — surviving a hot and dry period. Characteristic of insects of deserts and tropics (Pedigo, 2002). For example, some aphids enter aestivation in mid-summer, when their host plants become unsuitable (Zakhvatkin, 2001).
Winter diapause (hibernation) — surviving a cold period. Characteristic of insects of temperate and cold latitudes (Pedigo, 2002). This is the most widespread type of diapause (Gullan, 2014).
8.4. Photoperiodic Induction of Diapause
The triggering of diapause is controlled by certain environmental signals called token stimuli (Pedigo, 2002). The most important of them is photoperiod — day length (Gullan, 2014; Pedigo, 2002).
Role of Photoperiod
Photoperiod is the most reliable signal predicting the onset of seasonal changes (Pedigo, 2002). Unlike temperature, which may fluctuate, day length changes strictly regularly during the year (Gullan, 2014).
Insects measure day length and react to its change (Zakhvatkin, 2001). When the day becomes shorter than a certain threshold (critical photoperiod), the insect enters diapause (Pedigo, 2002). This threshold is species-specific and may vary from 8 to 16 hours (Gullan, 2014).
Mechanism of Photoperiod Perception
Perception of photoperiod is carried out by special photoreceptors located in the insect brain (Gullan, 2014; Zakhvatkin, 2001). These receptors are not eyes in the usual sense — they are light-sensitive cells connected with the neurosecretory system (Pedigo, 2002).
Information about day length is transmitted to neurosecretory cells of the brain, which control the synthesis of hormones regulating diapause (Randall, 2001; Pedigo, 2002).
Hormonal Regulation of Diapause
Diapause is regulated by the hormonal system (Randall, 2001; Pedigo, 2002):
Embryonic diapause — controlled by diapause hormone (DH), which is secreted by neurosecretory cells of the mother's subesophageal ganglion (Randall, 2001). This hormone acts on the eggs, causing their diapause (Pedigo, 2002).
Larval and pupal diapause — connected with the absence of prothoracicotropic hormone (PTTH) and, consequently, ecdysone (Randall, 2001; Pedigo, 2002). Without these hormones development stops (Zakhvatkin, 2001).
Imaginal diapause — connected with the absence of juvenile hormone (JH) and PTTH (Randall, 2001). Without these hormones the adult insect does not reproduce (Pedigo, 2002).
8.5. Why Diapause Is a Key Adaptation of Insects
Diapause is one of the most important adaptations of insects, allowing them to colonize temperate and cold latitudes (Gullan, 2014; Zakhvatkin, 2001). Let us consider the main advantages of diapause.
Synchronization with seasons. Diapause allows insects to synchronize their life cycle with seasonal changes in the environment (Pedigo, 2002). The insect survives the unfavorable period in a state of rest, and in spring resumes development (Zakhvatkin, 2001).
Energy saving. In the state of diapause the metabolism of the insect sharply decreases, which allows saving energy (Pedigo, 2002). This is especially important under conditions of food shortage (Gullan, 2014).
Resistance to unfavorable conditions. Insects in diapause possess increased resistance to cold, drought, and other extreme factors (Zakhvatkin, 2001). For example, many insects in diapause are capable of tolerating temperatures below −20 °C (Gullan, 2014).
Preservation of the population. Diapause allows a population to survive a period when its existence is impossible (Pedigo, 2002). Without diapause many insect species could not survive in temperate latitudes (Zakhvatkin, 2001).
8.6. Why Understanding Life Cycles Is Important for Forecasting Pest Outbreaks
For an agronomist, understanding the life cycles and diapause of pests is of enormous practical importance (Pedigo, 2002).
Forecasting the timing of pest appearance. Knowing when a pest exits diapause, one can predict the timing of its appearance on crops and carry out protective measures in time (Pedigo, 2002).
Determining vulnerable stages. Different developmental stages of a pest have different vulnerability to insecticides and other control methods (Zakhvatkin, 2001). Knowing the life cycle, one can choose the optimal time for treatment (Pedigo, 2002).
Forecasting the number of generations. Understanding voltinism allows predicting how many generations of the pest will appear during the season and accordingly planning the number of treatments (Pedigo, 2002).
Monitoring. Knowing the life cycle, one can correctly organize monitoring of the pest — use pheromone traps, light traps, and other methods (Pedigo, 2002).
Managing diapause. Some control methods are based on disrupting diapause — for example, the use of hormonal preparations imitating the action of juvenile hormone can prevent normal diapause and lead to the death of insects (Pedigo, 2002).
8.7. Brief Reminder on Life Cycles and Diapause
Let us summarize. The life cycle is the sequence of events in the life of one individual; the seasonal cycle is the sequence of life cycles during the year (Pedigo, 2002). The number of generations per year is called voltinism: univoltine species produce one generation, multivoltine several, semivoltine one generation over several years (Pedigo, 2002; Gullan, 2014).
Diapause is a state of physiological rest allowing insects to survive unfavorable conditions (Gullan, 2014). Diapause is triggered by photoperiod and regulated by hormones (Pedigo, 2002; Randall, 2001). Diapause may be embryonic, larval, pupal, or imaginal (Pedigo, 2002).
Understanding life cycles and diapause is necessary for forecasting pest outbreaks and planning protective measures (Pedigo, 2002).
9. Sense Organs of Insects
9.1. Introduction: Sensory Systems as the Basis of Behavior
The sense organs of insects are structures astonishing in their complexity and perfection, allowing these small creatures to perceive the world completely differently from humans. Insects react to signals that we do not notice: ultraviolet light, pheromones, substrate vibrations, polarized light (Gullan, 2014; Zakhvatkin, 2001). It is sensory systems that provide the possibility of finding food, a partner, avoiding predators, and orienting in space.
The sensory systems of insects are so perfect that in many ways they surpass human capabilities. For example, males of some butterflies are capable of detecting a female by smell at a distance of up to 11 kilometers (Blokhin, 2022). Bees and bumblebees perceive polarized and ultraviolet light, inaccessible to our eyes (Zakhvatkin, 2001). Some flies also perceive polarized light (Zakhvatkin, 2001). Insects react to ultrasound and possess seismic and magnetic senses (Zakhvatkin, 2001).
9.2. Compound Faceted Eyes
Compound eyes are the most characteristic and most perfect organs of vision in insects (Gullan, 2014; Pedigo, 2002). They are located on the sides of the head and may occupy a significant part of it.
Structure of the Compound Eye
The compound eye consists of many individual eye units — ommatidia (Gullan, 2014; Zakhvatkin, 2001). The number of ommatidia varies from a few units to 28,000 (in dragonflies) (Pedigo, 2002). Each ommatidium represents an independent structural unit (Gullan, 2014; Zakhvatkin, 2001):
Corneal lens — a transparent lens formed by cuticle. The cornea has a hexagonal shape, which gives the eye its characteristic mosaic appearance (Zakhvatkin, 2001).
Crystalline cone — a transparent formation located under the cornea. It focuses light onto the light-sensitive cells (Gullan, 2014).
Retinula cells — a group of 6–10 cells located around the central axis of the ommatidium. Each cell forms a rhabdom — a light-sensitive structure containing visual pigment (Gullan, 2014; Zakhvatkin, 2001).
Pigment cells — surround the crystalline cone and retinula cells. They isolate the ommatidia from each other, preventing light scattering (Pedigo, 2002).
Principle of Compound Eye Operation
The compound eye works on the principle of mosaic vision (Zakhvatkin, 2001). Each ommatidium perceives only part of the image — a point corresponding to its direction of view (Pedigo, 2002). The combination of signals from all ommatidia forms a mosaic image of the surrounding world in the insect brain (Gullan, 2014).
It is important to understand that the compound eye does not form a clear image in the sense in which we speak of vertebrate vision (Gullan, 2014). The resolving power of the compound eye is not great due to the small diameter of the lenses and the large focal length (Zakhvatkin, 2001). However, this system is superbly adapted for detecting movement: insects notice the movement of objects with high speed (Gullan, 2014; Pedigo, 2002).
Types of Compound Eyes
Depending on lighting conditions, two types of compound eyes are distinguished (Gullan, 2014; Zakhvatkin, 2001):
Apposition eyes — characteristic of diurnal insects. Each ommatidium is isolated by pigment cells, which provides clear mosaic vision (Gullan, 2014).
Superposition eyes — characteristic of crepuscular and nocturnal insects. Pigment cells are absent or weakly developed, which allows light from many lenses to focus on one rhabdom (Gullan, 2014; Zakhvatkin, 2001). This increases light sensitivity but reduces resolving power (Pedigo, 2002).
In some insects the pigment may move depending on the level of illumination, which allows the eye to work in both modes (Gullan, 2014).
Color Perception
Many insects possess color vision, and their spectral sensitivity differs from human (Gullan, 2014; Zakhvatkin, 2001). Bees, for example, distinguish four colors: the first corresponds to our perception of red, yellow, and green; the second to blue-green; the third to blue-violet; the fourth to ultraviolet (Zakhvatkin, 2001).
The ability to perceive ultraviolet light has important ecological significance. Many flowers that we see as monochromatic appear to insects as contrasting patterns indicating the path to nectar (Pedigo, 2002; Gullan, 2014). These patterns are called nectar guides (Pedigo, 2002).
Some insects are capable of perceiving polarized light and using it for navigation even under cloudy skies (Gullan, 2014; Zakhvatkin, 2001).
9.3. Simple Ocelli
Simple ocelli are small light-sensitive organs located on the vertex or frons of an insect (Gullan, 2014; Pedigo, 2002). In adult insects there are usually three ocelli arranged in a triangle, but in some groups there may be two or none at all (Gullan, 2014; Zakhvatkin, 2001).
Structure of an Ocellus
An ocellus consists of a transparent cuticular lens, under which light-sensitive cells are located (Gullan, 2014; Zakhvatkin, 2001). Unlike a compound eye, an ocellus does not have a crystalline cone or ommatidia (Zakhvatkin, 2001). The light-sensitive cells form a retina, which may contain up to 1000 receptor cells (Gullan, 2014).
Functions of Ocelli
Ocelli do not form images (Gullan, 2014; Pedigo, 2002). Their main function is perception of changes in light intensity (Zakhvatkin, 2001). They are very sensitive to weak light and to its changes (Gullan, 2014).
Ocelli participate in the regulation of circadian rhythms of activity, as well as in the orientation of the insect in space (Pedigo, 2002; Gullan, 2014). In some insects (for example, in dragonflies) ocelli help control body position in flight (Gullan, 2014).
Larval Stemmata
In larvae of insects with complete metamorphosis, compound eyes are absent. They are replaced by stemmata — simple eye units, the number of which may reach six or more (Gullan, 2014). Stemmata are usually located on the sides of the head and provide the larva with perception of light and movement (Gullan, 2014).
Stemmata are more complexly organized than ocelli: they have a lens, a crystalline body, and a group of retinal cells (Gullan, 2014). In some larvae (for example, in butterfly caterpillars) stemmata are capable of forming an image, although not a very clear one (Gullan, 2014).
9.4. Antennae and Sensilla
Antennae are the main sensory organs of insects, bearing numerous sensilla (Gullan, 2014; Zakhvatkin, 2001). It is on the antennae that most chemoreceptors and mechanoreceptors are located.
Sensilla: Universal Sensory Structures
Sensilla are elementary sensory structures located on the surface of the insect body (Gullan, 2014; Zakhvatkin, 2001). Each sensillum represents one or several sensory cells having sensitive peripheral processes that end in the external environment in a sensitive hair (Zakhvatkin, 2001).
Sensilla are extremely diverse in structure and functions (Gullan, 2014; Pedigo, 2002):
- Trichoid sensilla — hair-like, the most widespread. Perform functions of touch and hearing (Gullan, 2014).
- Campaniform sensilla — dome-shaped, react to deformations of the cuticle (Gullan, 2014; Pedigo, 2002).
- Placoid sensilla — plate-like, located in depressions of the cuticle (Pedigo, 2002).
- Coeloconic sensilla — sunken, characteristic of thermo- and hygroreceptors (Gullan, 2014).
- Basiconic sensilla — rod-like, characteristic of olfaction (Gullan, 2014).
Mechanoreceptors
Mechanoreceptors perceive mechanical stimuli — touch, pressure, vibration, body position (Gullan, 2014; Pedigo, 2002).
Trichoid sensilla — the most numerous mechanoreceptors. They react to deflection of the hair arising from touch or air movement (Gullan, 2014). Each hair is innervated by one sensory cell, which generates a nerve impulse upon deflection (Pedigo, 2002).
Campaniform sensilla — located in places subject to deformations: on leg joints, at the base of wings, on the halteres of dipterans (Gullan, 2014; Pedigo, 2002). They perceive tensions in the cuticle and play an important role in flight control (Gullan, 2014).
Chordotonal organs — internal mechanoreceptors consisting of a group of sensory cells stretched between two areas of cuticle (Gullan, 2014; Pedigo, 2002). They perceive vibrations, body position, and movements of limbs (Gullan, 2014).
Chemoreceptors
Chemoreceptors perceive chemical stimuli — smells and tastes (Gullan, 2014; Pedigo, 2002). They are located mainly on the antennae, but also on the mouthparts, tarsi, and other parts of the body (Zakhvatkin, 2001).
Olfactory sensilla — multiporous sensilla perceiving volatile substances (Gullan, 2014). They are located predominantly on the antennae and may be very numerous. In some cockroaches there are up to 100,000 olfactory sensilla on the antennae (McGavin, 2022).
Gustatory sensilla — uniporous sensilla perceiving dissolved substances (Gullan, 2014). They are located on the mouthparts, tarsi (in flies and butterflies), and also on other parts of the body (Pedigo, 2002; Zakhvatkin, 2001).
The sensitivity of insect chemoreceptors is astonishing. Males of some butterflies are capable of detecting female pheromones at a concentration of only a few molecules per cubic centimeter of air (Gullan, 2014).
9.5. Tympanal Organs (Hearing)
Many insects possess specialized organs of hearing — tympanal organs (Gullan, 2014; Pedigo, 2002).
Structure of the Tympanal Organ
The tympanal organ consists of a thin cuticular membrane — the tympanum — under which an air cavity is located (Gullan, 2014; Zakhvatkin, 2001). Chordotonal organs perceiving its oscillations are attached to the membrane (Pedigo, 2002).
Location of Tympanal Organs
Tympanal organs are located in different places in different groups of insects (Gullan, 2014; Pedigo, 2002):
- In grasshoppers (Tettigoniidae) — on the tibiae of the front legs (Zakhvatkin, 2001);
- In locusts (Acrididae) — on the first abdominal segment (Pedigo, 2002; Zakhvatkin, 2001);
- In crickets (Gryllidae) — on the tibiae of the front legs (Zakhvatkin, 2001);
- In butterflies (Lepidoptera) — on the thorax or abdomen (Gullan, 2014);
- In cicadas (Cicadidae) — on the abdomen (McGavin, 2022);
- In some bugs (Hemiptera) — on the thorax (Gullan, 2014).
Such diversity of location indicates that tympanal organs arose independently several times in evolution (Gullan, 2014).
Functions of Hearing
Insects use hearing for different purposes (Gullan, 2014; Pedigo, 2002):
Communication. Males of crickets, grasshoppers, and cicadas produce sounds to attract females (Zakhvatkin, 2001). Females perceive these sounds by means of tympanal organs (Gullan, 2014).
Detection of predators. Many nocturnal butterflies (for example, noctuids) are capable of hearing the ultrasonic signals of bats and undertaking evasive maneuvers (Gullan, 2014; Pedigo, 2002). The tympanal organs of noctuids are tuned to frequencies of 3000–150,000 Hz — precisely the range in which bat echolocators operate (Pedigo, 2002).
Detection of prey. Some predatory insects use hearing to detect prey (Gullan, 2014).
Johnston's Organ
Johnston's organ is a specialized chordotonal organ located in the pedicel (second antennal segment) (Gullan, 2014; Zakhvatkin, 2001). It perceives movements of the flagellum relative to the pedicel (Gullan, 2014).
In mosquitoes and other dipterans, Johnston's organ plays a special role: it perceives the sounds produced by females during flight (Gullan, 2014; Zakhvatkin, 2001). The frequency of the female's wing beats is species-specific, and the male is capable of recognizing it by sound (Gullan, 2014). This allows males to find females in swarms (Zakhvatkin, 2001).
In some insects Johnston's organ also participates in the perception of gravity and wind direction (Gullan, 2014).
9.6. Why the Sensory Systems of Insects Are Highly Specialized
The sensory systems of insects are highly specialized, which is connected with their lifestyle and ecological niches (Gullan, 2014; Zakhvatkin, 2001).
Small size and limited number of neurons. Insects have a limited number of nerve cells, so their sensory systems are optimized for efficient information processing at minimal cost (Gullan, 2014).
Diversity of ecological niches. Insects occupy almost all available habitats, and their sensory systems are adapted to specific conditions (Zakhvatkin, 2001). For example, nocturnal insects have more sensitive eyes than diurnal ones (Gullan, 2014).
Specialization to certain signals. Many insects are tuned to the perception of specific signals — pheromones, sounds of a certain frequency, certain colors (Gullan, 2014; Pedigo, 2002). This allows them to effectively find food, a partner, and avoid danger (Zakhvatkin, 2001).
High sensitivity. The sensory systems of insects possess astonishing sensitivity. For example, a male butterfly can detect a female's pheromone at a concentration of only a few molecules per cubic centimeter of air (Gullan, 2014). Bees perceive polarized light and orient by it even under cloudy skies (Zakhvatkin, 2001).
9.7. Why Pheromones Are a Key Tool of Communication
Pheromones are chemical substances released by insects into the external environment and causing specific reactions in other individuals of the same species (Gullan, 2014; Pedigo, 2002). Pheromones are the most important means of insect communication (Zakhvatkin, 2001).
Types of Pheromones
Pheromones perform diverse functions (Pedigo, 2002; Gullan, 2014):
Sex pheromones — attract individuals of the opposite sex. Most common in female butterflies, which release pheromones to attract males (Pedigo, 2002; Gullan, 2014).
Aggregation pheromones — attract individuals of both sexes to a food source or mating site. Characteristic of bark beetles and some flies (Gullan, 2014; Pedigo, 2002).
Alarm pheromones — warn other individuals of danger. Characteristic of aphids, bees, and ants (Gullan, 2014; Pedigo, 2002).
Trail pheromones — mark the path to a food source. Characteristic of ants and termites (Pedigo, 2002; Gullan, 2014).
Caste-regulating pheromones — control the development of individuals in a colony. Characteristic of social insects (Pedigo, 2002).
Mechanism of Pheromone Action
Pheromones are perceived by special olfactory sensilla located mainly on the antennae (Gullan, 2014). Pheromone molecules penetrate through the pores of the sensilla and bind with odorant-binding proteins (OBP), which transport them to receptors on the dendrites of sensory neurons (Gullan, 2014). Activation of receptors triggers a cascade of nerve impulses leading to a certain behavior (Gullan, 2014).
Significance of Pheromones for Practice
Pheromones are widely used in plant protection practice (Pedigo, 2002):
- Pest monitoring — pheromone traps allow detection of the appearance of a pest on crops (Pedigo, 2002);
- Mass trapping — pheromone traps are used to reduce pest numbers (Pedigo, 2002);
- Disinformation — saturating the environment with synthetic pheromones disrupts insect communication and prevents mating (Pedigo, 2002).
9.8. Brief Reminder About the Sense Organs
Let us sum up. The sense organs of insects include (Gullan, 2014; Zakhvatkin, 2001):
Compound faceted eyes—the main organs of vision, consisting of ommatidia. They provide mosaic vision, perception of movement, color, ultraviolet, and polarized light (Gullan, 2014; Pedigo, 2002).
Simple eyes (ocelli)—perceive changes in light intensity and participate in the regulation of circadian rhythms (Gullan, 2014; Zakhvatkin, 2001).
Antennae—bear numerous sensilla: mechanoreceptors (touch), chemoreceptors (smell and taste), and thermo- and hygroreceptors (Gullan, 2014; Zakhvatkin, 2001).
Tympanal organs—organs of hearing, perceiving sounds and ultrasound (Gullan, 2014; Pedigo, 2002).
Johnston's organ—perceives movements of the antenna; in mosquitoes, it perceives the flight sounds of females (Gullan, 2014; Zakhvatkin, 2001).
Pheromones—a key tool of chemical communication in insects, used for attracting a mate, alarm signals, marking food, and regulating castes (Gullan, 2014; Pedigo, 2002).
The sensory systems of insects are highly specialized and provide them with the ability to interact effectively with the environment (Zakhvatkin, 2001).
10. Ecological and Evolutionary Significance
10.1. Introduction: Why Insects Are the Dominant Group
Throughout the course we have examined the structure and development of insects. Now it is time to answer the key question: why did insects become the dominant group of animals on Earth? Why do they occupy almost all ecological niches on land and in fresh waters, while other groups of arthropods—crustaceans, arachnids, myriapods—are significantly inferior to them in diversity and abundance? (Gullan, 2014; Zakhvatkin, 2001).
The answer to this question does not reduce to a single factor. The evolutionary success of insects is the result of a combination of several key adaptations that acted together and reinforced each other (Pedigo, 2002; McGavin, 2022). In this lecture we will examine the main factors that determined the dominance of insects and discuss their ecological and evolutionary significance.
10.2. Why Insects Dominate Terrestrial Ecosystems
The dominance of insects in terrestrial ecosystems is manifested in several parameters: number of species, abundance of individuals, biomass, and diversity of ecological roles (Gullan, 2014; Pedigo, 2002).
Number of Species
Insects constitute about 1.5 million of the approximately 1.75 million described species of living organisms (Gullan, 2014). In other words, approximately every second or every third species known to science is an insect. Among animals the proportion of insects is even higher: they constitute about 75% of all known animal species (Pedigo, 2002).
For comparison: all mammals number about 5,500 species, birds about 10,000, and fishes about 30,000 (Hickman, 2015). Even taken together, vertebrates are inferior to insects by orders of magnitude (Gullan, 2014).
Abundance and Biomass
The abundance of insects also boggles the imagination. It has been calculated that for every human on Earth there are about 200 million insects, and for every acre of land there are about 40 million individuals (Pedigo, 2002). In the Brazilian Amazon, ants exceed all vertebrates combined in biomass by a ratio of 4:1 (Pedigo, 2002).
The biomass of insects in terrestrial ecosystems can be enormous. For example, in some tropical forests the biomass of termites reaches 22 g/m², which is twice the biomass of the largest herds of African ungulates (McGavin, 2022). In temperate latitudes the biomass of insects is also significant: in the soils of the forest zone, up to 1 million mites and springtails can inhabit 1 m² (Blokhin, 2022).
Diversity of Ecological Roles
Insects occupy practically all ecological niches available in terrestrial ecosystems (Gullan, 2014; Zakhvatkin, 2001). They act as:
Phytophages—consumers of living plants. Among insects there are consumers of leaves, stems, roots, seeds, fruits, and wood (Pedigo, 2002). Phytophagy is the most widespread type of feeding among insects: about half of all known species feed on plants (Gullan, 2014).
Predators—consumers of other animals. Predatory insects (ground beetles, ladybugs, lacewings, predatory bugs) regulate the abundance of phytophages and play an important role in ecosystems (Pedigo, 2002).
Parasites and parasitoids—organisms feeding at the expense of other organisms. Parasitoids (ichneumon wasps, tachinid flies) are the most important natural enemies of insect pests (Gullan, 2014).
Saprophages—consumers of dead organic matter. Saprophagous insects (termites, fly larvae, dung beetles) participate in the decomposition of organic matter and soil formation (Zakhvatkin, 2001).
Pollinators—carriers of pollen. Bees, bumblebees, butterflies, and flies pollinate most flowering plants (Pedigo, 2002).
Disease vectors—organisms transmitting disease agents. Mosquitoes, flies, fleas, and lice transmit dangerous diseases of humans and animals (Pedigo, 2002).
This diversity of ecological roles makes insects an indispensable component of terrestrial ecosystems (Gullan, 2014).
10.3. Why Insects Occupy Almost All Ecological Niches
Insects have mastered practically all available habitats on land—from polar tundras to tropical forests, from high-mountain glaciers to hot springs, from soil horizons to the aerial environment (Gullan, 2014; Blokhin, 2022). They are found in caves, in the nests of birds and mammals, in the bodies of other animals, in decaying remains, and in food stores (Zakhvatkin, 2001).
The ability to occupy such diverse niches is connected with several factors.
Small size. Most insects have a length of 1 to 10 mm (McGavin, 2022). Small size means that the habitat for an insect is much more "fine-grained" than for a large animal (Gullan, 2014). A single tree can support the existence of hundreds of insect species, whereas for mammals it represents only one food resource (Gullan, 2014).
Diversity of mouthparts. As we discussed in Section 3, the mouthparts of insects are extremely diverse and adapted for feeding on the most varied substrates (Zakhvatkin, 2001). This allows insects to use practically any available food source.
Flight. The ability to fly allows insects to disperse effectively and master new habitats (Pedigo, 2002). Flight also allows them to use food resources distributed in space (Gullan, 2014).
Metamorphosis. The separation of larval and adult stages into different ecological niches allows a species to use more resources (Gullan, 2014; Pedigo, 2002). The larva and the adult do not compete with each other (McGavin, 2022).
Ability for diapause. Diapause allows insects to survive unfavorable seasons and master regions with harsh climates (Pedigo, 2002; Zakhvatkin, 2001).
10.4. Why Evolutionary Success Is Connected with Flight, Metamorphosis, Small Size, and High Fecundity
The evolutionary success of insects is the result of a combination of several key adaptations. Let us examine each of them in more detail.
Flight
Flight is one of the most important evolutionary acquisitions of insects (Gullan, 2014; Zakhvatkin, 2001). Insects were the first animals to master active flight, and for more than 300 million years they have remained the only flying invertebrates (Gullan, 2014).
Flight gave insects enormous advantages (Pedigo, 2002; Zakhvatkin, 2001):
- Dispersal—the ability to overcome barriers insurmountable for nonflying animals;
- Escape from predators—the ability to quickly leave a dangerous place;
- Use of distributed resources—the ability to effectively use food resources distributed in space;
- Search for a mate—the ability to find a partner over great distances.
The ability to fly arose only in Pterygota, which constitute more than 99% of all modern insects (Gullan, 2014). Primarily wingless insects (Archaeognatha, Zygentoma) are few in number—about 1,200 species (McGavin, 2022). This ratio eloquently testifies that flight became a key factor in the evolutionary success of Insecta (Gullan, 2014).
Metamorphosis
Metamorphosis is the second key acquisition of insects (Gullan, 2014; Zakhvatkin, 2001). Holometaboly (complete metamorphosis) allowed the ecological niches of the larva and the adult to be separated, which reduced competition and increased survival (Pedigo, 2002).
Advantages of holometaboly (Gullan, 2014; Pedigo, 2002):
- Separation of niches—the larva and the adult feed on different food and live in different places;
- Specialization of stages—the larva is specialized for feeding and growth, the adult for reproduction and dispersal;
- Protection from unfavorable conditions—the pupa often serves as a stage for surviving unfavorable conditions;
- Reduction of competition—the population can be more numerous.
It is precisely holometabolous insects (Holometabola) that constitute about 80% of all known insect species (Gullan, 2014; Pedigo, 2002). This numerical superiority is explained by the advantages of complete metamorphosis (McGavin, 2022).
Small Size
Small size is the third key acquisition of insects (Gullan, 2014; McGavin, 2022). Most insects have a length of 1 to 10 mm (McGavin, 2022). Small size gives several advantages (Gullan, 2014; Pedigo, 2002):
- Fine-grained environment—the habitat for an insect is much more "fine-grained" than for a large animal. A single tree can support the existence of hundreds of insect species (Gullan, 2014);
- Rapid development—small size allows reaching sexual maturity faster and producing more generations per year (Zakhvatkin, 2001);
- Effective dispersal—small size allows insects to be carried by the wind over great distances (Pedigo, 2002);
- Resistance to falling—small size means a high surface-to-volume ratio, which allows insects to fall from great heights without damage (McGavin, 2022).
Limitations of small size (Gullan, 2014; McGavin, 2022):
- Limitations of the tracheal system—tracheae cannot effectively supply oxygen to tissues at distances greater than a few millimeters, which limits the maximum size of insects (Gullan, 2014);
- Limitations on minimum size—the minimum size of an insect is limited by the need to have a sufficient number of neurons for functioning (McGavin, 2022).
High Fecundity
High fecundity is the fourth key acquisition of insects (Gullan, 2014; Zakhvatkin, 2001). One female insect is capable of laying hundreds, thousands, and sometimes millions of eggs (Zakhvatkin, 2001).
Examples of high fecundity (Pedigo, 2002; Zakhvatkin, 2001):
- House fly (Musca domestica)—up to 2,000 eggs per life;
- Honey bee (Apis mellifera)—the queen lays up to 1,500 eggs per day, up to 1 million per life (Gullan, 2014);
- Aphids (Aphididae)—one female per year can produce up to 17 × 10³⁰ descendants (Blokhin, 2022);
- Locusts (Acrididae)—one female lays up to 100–200 eggs.
High fecundity ensures (Gullan, 2014; Pedigo, 2002):
- Rapid recovery of abundance—after unfavorable conditions the population quickly recovers;
- Rapid adaptation—high genetic variability allows rapid adaptation to changing conditions;
- Colonization of new habitats—a large number of descendants increases the chances of successful dispersal.
10.5. Ecological Significance of Insects
Insects play a key role in the functioning of terrestrial and freshwater ecosystems (Gullan, 2014; Zakhvatkin, 2001). Their ecological significance is difficult to overestimate.
Cycling of substances. Saprophagous insects (termites, fly larvae, dung beetles) participate in the decomposition of organic matter and the return of nutrients to the soil (Gullan, 2014; Zakhvatkin, 2001). Without them, the cycling of substances would be significantly slowed (Pedigo, 2002).
Pollination. Pollinating insects (bees, bumblebees, butterflies, flies) pollinate most flowering plants (Pedigo, 2002). About 65% of all plants depend on insect pollinators (Miller, 2024). The value of pollination of agricultural crops is estimated at billions of dollars annually (Gullan, 2014).
Regulation of abundance. Predatory and parasitic insects regulate the abundance of phytophages, preventing their mass reproduction (Pedigo, 2002). Without natural enemies, many phytophages would become serious pests (Gullan, 2014).
Food chains. Insects are an important link in food chains. They serve as food for birds, mammals, reptiles, amphibians, and fishes (Gullan, 2014; Pedigo, 2002). For example, insects are the main food for many songbirds (Pedigo, 2002).
Soil formation. Soil insects (springtails, mites, termites) participate in soil formation, mixing organic matter and mineral particles (Blokhin, 2022; Zakhvatkin, 2001).
10.6. Evolutionary Significance of Insects
Insects are an ancient group that arose more than 400 million years ago (Gullan, 2014). During this time they have survived several mass extinctions, climate change, and continental drift (Zakhvatkin, 2001). Their evolutionary history is the key to understanding the evolution of arthropods and terrestrial ecosystems as a whole.
Antiquity. Insects already existed in the Devonian (more than 400 million years ago), long before the appearance of dinosaurs (Gullan, 2014). They witnessed the evolution of plants, the appearance of flowering plants, and the flourishing and extinction of many groups of animals (Zakhvatkin, 2001).
Evolutionary radiations. Insects have survived several major evolutionary radiations connected with the appearance of new resources (Gullan, 2014). For example, the radiation of flowering plants in the Cretaceous was accompanied by the radiation of pollinating insects and phytophages (Pedigo, 2002).
Coevolution. Insects and plants have coevolved over hundreds of millions of years (Gullan, 2014). Plants developed defense mechanisms, and insects developed ways to overcome them (Zakhvatkin, 2001). This "arms race" stimulated the diversity of both groups (Gullan, 2014).
Model objects. Insects are the most important model objects for biological research (Gullan, 2014). Fundamental discoveries in genetics, embryology, and evolutionary biology were made on Drosophila melanogaster (Gullan, 2014; Miller, 2024).
10.7. Brief Reminder
Let us sum up. The evolutionary success of insects is the result of a combination of several key adaptations (Gullan, 2014; Zakhvatkin, 2001):
Flight—allowed dispersal, escape from predators, and use of distributed resources (Pedigo, 2002).
Metamorphosis—allowed the separation of the ecological niches of larva and adult, reduced competition, and increased survival (Gullan, 2014).
Small size—allowed use of the fine-grained environment, rapid development, and effective dispersal (McGavin, 2022).
High fecundity—ensured rapid recovery of abundance and rapid adaptation (Zakhvatkin, 2001).
These factors acted together, reinforcing each other, and led to insects becoming the dominant group of animals on Earth (Gullan, 2014; Pedigo, 2002).
11. Significance for the Agrosphere
11.1. Introduction: Insects and Agriculture
Throughout the lecture we have examined insects as an object of zoology—their structure, development, physiology, and ecology. However, for a student of agricultural specialization it is important to understand that insects are not only an object of fundamental science but also the most important factor determining the success or failure of agricultural production (Pedigo, 2002). Annual crop losses from insect pests amount to approximately one quarter of world food production, and this figure increases as crop yields grow and sown areas expand (Zakhvatkin, 2001).
At the same time, far from all insects are harmful. Of the millions of known species, only about 15,000 cause damage to humans (Zakhvatkin, 2001). Moreover, many insects bring enormous benefit to agriculture: they pollinate cultivated plants, destroy pests, improve the soil, and produce valuable products (Pedigo, 2002; Gullan, 2014). Understanding this dual role of insects is the key to competent management of agroecosystems.
In this concluding section we will examine the main functional groups of insects in the agrosphere and their significance for agricultural production.
11.2. Insects as Pests of Agricultural Crops
Pests are the best-known and most studied group of insects in the agrosphere (Pedigo, 2002). It is with them that most practical tasks of plant protection are connected.
Scale of Losses
Losses from insect pests are enormous. According to FAO estimates, annually in the world about 20–25% of potential yield is lost to pests (Zakhvatkin, 2001). In the USA annual losses from insects in agriculture are estimated at 7.5 billion dollars (Hickman, 2015). In developing countries losses may be even higher because of the absence of effective means of protection (Pedigo, 2002).
Losses during storage of the harvest are especially great. In some cases losses of products in storage exceed losses in the field (Pedigo, 2002). The main pests of stored products are beetles (granary weevil, confused flour beetle) and moths (grain moth, Mediterranean flour moth) (Pedigo, 2002; Blokhin, 2022).
Main Groups of Pests
Pests of agricultural crops belong to different orders of insects (Pedigo, 2002; Zakhvatkin, 2001):
Orthoptera—locusts, grasshoppers, mole crickets. Locusts are one of the most dangerous pests, capable of destroying crops over vast areas (McGavin, 2022). Mole crickets damage roots and tubers (Zakhvatkin, 2001).
Hemiptera—sunn pest, plant bugs, aphids, cicadas. The sunn pest damages cereal crops, causing a decrease in grain quality (Zakhvatkin, 2001). Aphids not only suck out sap but also transmit viral diseases (Pedigo, 2002).
Coleoptera—Colorado potato beetle, cereal leaf beetles, wireworms, weevils. The Colorado potato beetle is the most dangerous pest of potato (Zakhvatkin, 2001). Wireworms (larvae of click beetles) damage the roots of many crops (Pedigo, 2002).
Lepidoptera—cutworms, codling moths, snout moths, cabbage whites. Cutworm caterpillars are among the most dangerous pests, damaging the aboveground parts of plants (Pedigo, 2002). The codling moth damages fruits (Zakhvatkin, 2001).
Diptera—Hessian fly, frit fly, cabbage fly, fruit flies. Larvae of these flies damage stems, roots, and fruits (Pedigo, 2002; Zakhvatkin, 2001).
Hymenoptera—sawflies, gall wasps. The wheat stem sawfly damages the stems of cereals (Zakhvatkin, 2001).
Types of Damage
Insects cause different types of damage depending on the structure of the mouthparts and mode of life (Pedigo, 2002; Zakhvatkin, 2001):
Chewing damage—eating leaves, stems, fruits, and gnawing tunnels in tissues (caterpillars, beetles, locusts) (Pedigo, 2002).
Sucking damage—sucking sap from tissues, leading to deformation, discoloration, and drying out (aphids, bugs, cicadas) (Zakhvatkin, 2001).
Mining damage—eating the internal tissues of a leaf between the upper and lower epidermis (larvae of flies and moths) (Gullan, 2014).
Gall damage—formation of galls—pathological outgrowths of tissues (gall wasps, gall midges) (Zakhvatkin, 2001).
Damage during storage—eating stored grain, flour, and dried fruits (granary weevil, grain moth) (Pedigo, 2002).
11.3. Pollinating Insects
Pollination is one of the most important ecosystem services rendered by insects to agriculture (Gullan, 2014; Pedigo, 2002).
Significance of Pollination
About 65% of all flowering plants depend on insect pollinators (Miller, 2024). Among the agricultural crops pollinated by insects are fruits (apple, pear, cherry, plum), berries (strawberry, raspberry, currant), vegetables (tomato, cucumber, pepper, eggplant), melons (watermelon, melon), oilseeds (sunflower, rapeseed), legumes (alfalfa, clover), and many others (Pedigo, 2002; Zakhvatkin, 2001).
The value of pollination of agricultural crops by insects is estimated at 15 billion dollars annually in the USA alone (Gullan, 2014). On a global scale this figure reaches 200 billion dollars (Gullan, 2014). Without insect pollinators, the production of many crops would become impossible or would sharply decline (Pedigo, 2002).
Main Pollinators
The main pollinators of agricultural crops (Pedigo, 2002; Zakhvatkin, 2001):
Honey bee (Apis mellifera)—the most important pollinator. Hives are transported to fields for pollination of crops (Pedigo, 2002). Bees pollinate about 90% of all entomophilous crops (Zakhvatkin, 2001).
Bumblebees (Bombus)—important pollinators, especially in cold conditions and in greenhouses. Bumblebees are bred for pollination of tomatoes and other crops (Zakhvatkin, 2001).
Solitary bees (various families of Apoidea)—the alfalfa leafcutter bee, the orchard mason bee. They are used for pollination of alfalfa and other crops (Pedigo, 2002).
Butterflies, flies, beetles—also participate in pollination, although their role is smaller (Gullan, 2014).
The Problem of Pollinator Decline
In recent decades there has been a decline in pollinator abundance, which causes serious concern (Gullan, 2014; Miller, 2024). The main causes:
Colony Collapse Disorder (CCD)—mass death of bee colonies caused by a complex of causes: parasites (Varroa mite), viruses, pesticides, and stress (Miller, 2024; Hickman, 2015).
Loss of habitats—destruction of natural habitats of pollinators (Gullan, 2014).
Pesticides—neonicotinoids and other insecticides negatively affect pollinators (Gullan, 2014).
Climate change—disrupts the synchronization of plant flowering and pollinator activity (Gullan, 2014).
Conservation of pollinators is one of the most important tasks of modern agriculture (Pedigo, 2002).
11.4. Entomophagous Insects
Entomophages are insects that feed on other insects. They play a key role in regulating pest abundance (Pedigo, 2002; Zakhvatkin, 2001).
Types of Entomophages
Predators—kill and eat prey. These include ladybugs, ground beetles, lacewings, predatory bugs, and spiders (Pedigo, 2002). One ladybug eats up to 5,000 aphids in its life (Zakhvatkin, 2001).
Parasitoids—lay eggs in or on the body of a host; the larvae develop at its expense, killing it. These include ichneumon wasps, braconids, tachinid flies, and trichogramma (Gullan, 2014; Pedigo, 2002).
Use in Biological Control
Entomophages are widely used for biological control of pests (Pedigo, 2002; Zakhvatkin, 2001). Classic examples:
Introduction of the vedalia beetle (Rodolia cardinalis)—a ladybug from Australia—into California to control the cottony cushion scale (Icerya purchasi) in 1888. This was the first successful biological control project (Pedigo, 2002).
Trichogramma (Trichogramma)—a parasitoid wasp parasitizing the eggs of butterflies. It is widely used to control cutworms, codling moths, and other pests (Zakhvatkin, 2001).
Apanteles (Apanteles)—a braconid parasitizing the caterpillars of cabbage whites. It is used to control the cabbage white (Zakhvatkin, 2001).
Phytoseiulus (Phytoseiulus persimilis)—a predatory mite used to control spider mites in greenhouses (Gullan, 2014).
Advantages of Biological Control
Biological control has a number of advantages over chemical control (Pedigo, 2002):
- Ecological safety—does not pollute the environment;
- Specificity—entomophages usually affect only target species;
- Long-term effect—after acclimatization, entomophages persist in the ecosystem;
- Cost-effectiveness—does not require annual expenditure.
11.5. Soil-Forming Insects
Soil insects play a most important role in soil formation and maintenance of fertility (Blokhin, 2022; Zakhvatkin, 2001).
Role in Soil Formation
Soil insects (springtails, mites, termites, ants, beetle larvae) participate in (Blokhin, 2022; Zakhvatkin, 2001):
Decomposition of organic matter—process dead plant remains, accelerating their decomposition (Gullan, 2014).
Mixing of soil—ants and termites mix soil horizons, improving soil structure (Blokhin, 2022).
Enrichment of soil—excrement of insects enriches the soil with nutrients (Zakhvatkin, 2001).
Aeration—insect tunnels improve aeration and drainage of the soil (Pedigo, 2002).
Termites as Soil Formers
Termites are among the most important soil formers in the tropics (McGavin, 2022). They consume up to one third of the annual production of dead wood, leaves, and grass (McGavin, 2022). The biomass of termites in some tropical forests reaches 22 g/m², which is twice the biomass of the largest herds of ungulates (McGavin, 2022).
Termites create termitaria—complex structures enriching the soil with organic substances and nutrients (McGavin, 2022).
Ants as Soil Formers
Ants also play an important role in soil formation (Blokhin, 2022). They move soil, enrich it with organic matter, and improve its structure. In some ecosystems ants move more earth than earthworms (McGavin, 2022).
11.6. Insects as Disease Vectors
Many insects are vectors of disease agents of humans, animals, and plants (Pedigo, 2002; Zakhvatkin, 2001).
Vectors of Human and Animal Diseases
Main vectors (Pedigo, 2002; Blokhin, 2022):
Mosquitoes (Culicidae)—vectors of malaria, yellow fever, dengue, encephalitis, filariasis, and Zika virus (Pedigo, 2002; Miller, 2024). Malaria annually kills more than 400,000 people, mainly children in Africa (McGavin, 2022).
Blackflies (Simuliidae)—vectors of onchocerciasis (river blindness) (McGavin, 2022).
Horseflies (Tabanidae)—vectors of anthrax, tularemia, and loiasis (McGavin, 2022).
Tsetse fly (Glossina)—vector of sleeping sickness (African trypanosomiasis) (McGavin, 2022; Blokhin, 2022).
Fleas (Siphonaptera)—vectors of plague and endemic typhus (McGavin, 2022).
Lice (Psocodea: Anoplura)—vectors of typhus and relapsing fever (Blokhin, 2022).
Sand flies (Psychodidae: Phlebotominae)—vectors of leishmaniasis (McGavin, 2022).
Triatomine bugs—vectors of Chagas disease (McGavin, 2022).
Vectors of Plant Diseases
Many insects transmit viral, bacterial, and fungal diseases of plants (Pedigo, 2002; Zakhvatkin, 2001):
Aphids (Aphididae)—transmit more than 110 plant viruses (McGavin, 2022). One aphid can infect a plant with several viruses simultaneously (Pedigo, 2002).
Leafhoppers (Cicadellidae)—transmit viruses, mycoplasmas, and rickettsias (Zakhvatkin, 2001).
Whiteflies (Aleyrodidae)—transmit viruses causing diseases of tomatoes, cotton, and cucumbers (Pedigo, 2002).
Thrips (Thysanoptera)—transmit viruses causing spotted wilt of tomatoes (Pedigo, 2002).
Bark beetles (Scolytinae)—transmit fungi causing Dutch elm disease (Pedigo, 2002).
Significance for Practice
Understanding the role of insects as disease vectors is necessary for (Pedigo, 2002):
- Forecasting epidemics—knowledge of vector biology allows prediction of disease outbreaks;
- Development of control measures—control of vector abundance reduces disease incidence;
- Quarantine measures—prevention of the introduction of new vectors and disease agents.
11.7. Insects as Objects of Aquaculture and Industrial Breeding
Some insects are bred by humans to obtain valuable products (Pedigo, 2002; Zakhvatkin, 2001).
Silkworm
The silkworm (Bombyx mori) is the best-known object of industrial breeding (Zakhvatkin, 2001). Its caterpillars produce silk—a valuable textile raw material (Pedigo, 2002).
The history of sericulture goes back more than 4,500 years (McGavin, 2022). Annually the world produces more than 45,000 tons of silk (Pedigo, 2002). For this, about 2 trillion caterpillars are reared on 90 million tons of mulberry leaves (Pedigo, 2002).
Honey Bee
The honey bee (Apis mellifera) is bred for honey, wax, propolis, royal jelly, and bee venom (Zakhvatkin, 2001). Beekeeping is an important branch of agriculture in many countries (Pedigo, 2002).
Other Objects of Breeding
Lac insect (Kerria lacca)—a source of shellac used for the production of varnishes, polishes, and insulators (Pedigo, 2002).
Cochineal (Dactylopius coccus)—a source of carmine—a red dye used in the food and cosmetic industries (Pedigo, 2002; Gullan, 2014).
Chinese wax insect (Ericerus pela)—a source of wax for candles (Pedigo, 2002).
Predatory mites and insects—bred for biological control (Gullan, 2014).
Feed insects—crickets, mealworms, and fly larvae are bred as feed for domestic animals and fish (Blokhin, 2022; Gullan, 2014).
Insects as Food
In some regions of the world insects are consumed as food by humans (entomophagy) (Gullan, 2014). About 2,000 species of insects are used as food (Gullan, 2014). The most popular are termites, locusts, caterpillars, and beetle larvae (Gullan, 2014). In the future entomophagy may become an important source of protein for the growing human population (Gullan, 2014).
11.8. Brief Reminder About Functional Groups
Let us sum up. In the agrosphere insects act in several functional roles (Pedigo, 2002; Zakhvatkin, 2001):
Pests—insects damaging cultivated plants and stored products. They cause enormous damage to agriculture (Pedigo, 2002).
Pollinators—insects pollinating cultivated plants. Their role in agriculture is difficult to overestimate (Gullan, 2014).
Entomophages—insects destroying pests. They are used in biological control (Pedigo, 2002).
Soil formers—insects improving the structure and fertility of the soil (Blokhin, 2022).
Disease vectors—insects transmitting disease agents of humans, animals, and plants (Pedigo, 2002).
Objects of breeding—insects bred for valuable products (silk, honey, wax, dyes) (Zakhvatkin, 2001).
Understanding these functional roles is necessary for competent management of agroecosystems (Pedigo, 2002). Plant protection must take into account not only harmful but also beneficial insects, as well as their interactions (Zakhvatkin, 2001).
References
- Gullan, P.J., Cranston, P.S. (2014). ‘External anatomy’, in The Insects. An Outline of Entomology. West Sussex, UK: John Wiley & Sons, pp. 26-55.
- Gullan, P.J., Cranston, P.S. (2014). ‘Insect development and life histories’, in The Insects. An Outline of Entomology. West Sussex, UK: John Wiley & Sons, pp. 156-189.
- Gullan, P.J., Cranston, P.S. (2014). ‘Insect evolution and biogeography’, in The Insects. An Outline of Entomology. West Sussex, UK: John Wiley & Sons, pp. 227-248.
- Gullan, P.J., Cranston, P.S. (2014). ‘Insect systematics: phylogeny and classification’, in The Insects. An Outline of Entomology. West Sussex, UK: John Wiley & Sons, pp. 190-226.
- Gullan, P.J., Cranston, P.S. (2014). ‘Sensory systems and behaviour’, in The Insects. An Outline of Entomology. West Sussex, UK: John Wiley & Sons, pp. 95-124.
- Gullan, P.J., Cranston, P.S. (2014). ‘The importance, diversity and conservation of insects’, in The Insects. An Outline of Entomology. West Sussex, UK: John Wiley & Sons, pp. 1-25.
- Hickman, C.P. Jr., Keen, S.L., Larson, Allan, Eisenhour, D.J. (2015). ‘Arthropods’, in Animal Diversity. New York, NY: McGraw-Hill Education, pp. 258-302.
- Hickman, C.R. Jr., Roberts, L.S., Larson, Allan, I’Anson, H. (2004). ‘Arthropods’, in Integrated Principles of Zoology. New York, NY: Higher Education, pp. 364-376.
- Khan, S.Mahmood, Ali, Sajid, Nawaz, Aamir, Bukhari, S.AsadH., Ejaz, Shaghef, Ahmad, Shakeel (2019). ‘Integrated Pest and Disease Management for Better Agronomic Crop Production’, in Agronomic Crops. Singapore: Springer Singapore, 385-428. doi: 10.1007/978-981-32-9783-8_19
- McGavin, G.C., Davranoglou, L. (2022). ‘Introduction to insect evolution and biology’, in Essential Entomology. Cambridge, UK: Oxford University Press, pp. 1-34.
- McGavin, G.C., Davranoglou, L. (2022). ‘The insect orders. Insect groups that predate the evolution of wings’, in Essential Entomology. Cambridge, UK: Oxford University Press, pp. 35-43.
- McGavin, G.C., Davranoglou, L. (2022). ‘The insect orders. The winged insects. Division Endopterygota (= Holometabola)’, in Essential Entomology. Cambridge, UK: Oxford University Press, pp. 156-276.
- McGavin, G.C., Davranoglou, L. (2022). ‘The insect orders. The winged insects. Division Neoptera’, in Essential Entomology. Cambridge, UK: Oxford University Press, pp. 59-155.
- Miller, Stephen, Tupper, T.A. (2024). ‘The Mandibulata: Pancrustacea and Myriapoda’, in Zoology. New York, NY: McGraw Hill, pp. 256-283.
- Pedigo, L.P. (2002). ‘Insect structures and life processes’, in Entomology and Pest Management. New Jersey: Prentice Hall, pp. 35-78.
- Pedigo, L.P. (2002). ‘Introduction’, in Entomology and Pest Management. New Jersey: Prentice Hall, pp. 1-34.
- Pedigo, L.P. (2002). ‘The insect life cycle’, in Entomology and Pest Management. New Jersey: Prentice Hall, pp. 145-174.
- Randall, David, Burggren, Warren, French, Kathleen (2001). ‘Glands and Hormones’, in Eckert Animal Physology. Mechanisms and Adaptations. New York, NY: W. H. Freeman and Company, pp. 301-360.
- vanEmden, H.F. (2013). ‘Class Arachnida’, in Handbook of Agricultural. Entomology. West Sussex, UK: Wiley-Blackwell, pp. 272-283.
- vanEmden, H.F. (2013). ‘External features of insects – structure and function’, in Handbook of Agricultural. Entomology. West Sussex, UK: Wiley-Blackwell, pp. 9-24.
- vanEmden, H.F. (2013). ‘The major divisions of the Insecta’, in Handbook of Agricultural. Entomology. West Sussex, UK: Wiley-Blackwell, pp. 25-30.
- vanEmden, H.F. (2013). ‘The world of insects’, in Handbook of Agricultural. Entomology. West Sussex, UK: Wiley-Blackwell, pp. 1-8.
- Блохин, Г.И., Александров, В.А. (2022). ‘Тип Членистоногие (Arthropoda) [Phylum Arthropoda]’, in Зоология [Zoology]. Санкт-Петербург: Лань, pp. 183-317.
- Захваткин, Ю.А. (2001). ‘Введение [Introduction]’, in Курс общей энтомологии [Course in General Entomology]. Москва: Колос, pp. 4-19.
- Захваткин, Ю.А. (2001). ‘Морфология насекомых [Insect morphology]’, in Курс общей энтомологии [Course in General Entomology]. Москва: Колос, pp. 20-75.
- Шарова, И.Х. (2002). ‘Тип Членистоногие (Arthropoda) [Phylum Arthropoda]’, in Зоология беспозвоночных [Invertebrate Zoology]. Москва: ВЛАДОС, pp. 341-529.


