Vectors and Reservoirs of Pathogens

Last updated: October 04, 2026

1. Introduction: What Is a Vector and a Reservoir

In previous sections of our course, we examined parasitism as a form of ecological relationship in which one organism (the parasite) uses another (the host) as a habitat and source of nutrition. However, in most cases the life cycle of a parasite is not limited to a single host. To be transmitted from one host to another, especially if the hosts do not come into direct contact, parasites require intermediaries. In this lecture we will examine two key concepts that underlie epidemiology and epizootiology: the vector and the reservoir.

A vector is an organism that transmits the causative agent of a disease from one host (or reservoir) to another. Most often, arthropods act as vectors: insects and ticks (Roberts et al., 2013). For example, mosquitoes of the genus Anopheles are vectors of malaria plasmodia, while ixodid ticks are vectors of the causative agents of Lyme disease (Gullan & Cranston, 2014). A vector is not merely a passive “container”; its biology, behavior, and physiology are closely linked to the pathogen, and this relationship often has a deep evolutionary character.

A reservoir is a species (or group of species) of animals in whose population the pathogen persists indefinitely and from which it can be transmitted to vectors or directly to other susceptible organisms. The reservoir ensures the constant existence of the pathogen in nature, even if it is temporarily absent from the population of the main host (for example, humans or agricultural animals). A classic example is rodents—reservoirs of the causative agents of plague, tularemia, and leptospirosis (Basiouni et al., 2025). The reservoir is the “storage” of infection, its ecological and evolutionary “home.”

The distinction between a mechanical and a biological vector is fundamentally important for understanding transmission mechanisms. In mechanical transmission, the pathogen is simply carried on the body, limbs, or mouthparts of the vector without reproducing or developing in it. An example is flies that carry bacteria of intestinal infections on their legs, flying from feces to food (Gullan & Cranston, 2014). In biological transmission, the pathogen necessarily passes through certain stages of development or reproduction in the vector’s body. Without this vector, the pathogen cannot complete its life cycle and become infective for the next host. Thus, the malaria plasmodium undergoes a complex developmental cycle in the mosquito before it can infect humans (Roberts et al., 2013).

Why are vectors and reservoirs key links in epidemiology? Imagine that the pathogen is a “fire” and hosts are “trees.” The reservoir is a dry forest in which the fire can smolder for years, while the vector is a spark that carries the fire to new, still untouched trees. Without a reservoir, the pathogen would quickly disappear, “burning out” in a single host. Without a vector, it could not overcome the distance between hosts. That is why understanding the biology of vectors and reservoirs is not an academic exercise but the foundation of prevention. We cannot effectively fight a disease without knowing where and how the pathogen “hides” in nature and how it “travels” between its victims (Jeger et al., 2023).

In the following sections, we will examine in detail the diversity of vectors, transmission mechanisms, ecological and evolutionary aspects of their relationships with pathogens, and their role in the pathology of animals, plants, and humans.

2. Types of Vectors

The diversity of vectors is enormous, and they belong to different phyla and classes of the animal world. Understanding who exactly is a vector is the first step toward understanding how a disease spreads. In this section, we will examine the main groups of vectors that are important for medicine, veterinary medicine, and plant protection.

Arthropods (Arthropoda)

The overwhelming majority of known vectors belong to the phylum Arthropods. Their importance is so great that in medical and veterinary entomology they are studied especially thoroughly (Gullan & Cranston, 2014). Let us examine the key groups.

Ticks (Acari). These are not insects but arachnids. Two groups are important for us: ixodid (pasture) and argasid ticks. Ixodid ticks are vectors of the causative agents of piroplasmosis and babesiosis (Babesia spp.) in cattle and dogs, as well as borreliosis (Lyme disease) and tick-borne encephalitis in humans (Roberts et al., 2013). A special feature of ticks is transovarial and transstadial transmission of pathogens, which makes them extremely effective reservoirs and vectors at the same time (Gullan & Cranston, 2014).

Mosquitoes (Culicidae). A family of dipteran insects that is perhaps the best-known vector in the world. Mosquitoes of the genus Anopheles transmit malaria plasmodia (Roberts et al., 2013), those of the genus Aedes transmit dengue, yellow fever, and Zika viruses, and those of the genus Culex transmit West Nile virus and the causative agents of filariases (Gullan & Cranston, 2014). Mosquitoes are a classic example of a biological vector, in whose body the pathogen undergoes a complex developmental cycle.

Blackflies (Simuliidae). Small blood-sucking dipterans whose larvae develop in flowing waters. Blackflies of the genus Simulium are vectors of the filariae Onchocerca volvulus, which cause onchocerciasis (river blindness) in humans and animals (Roberts et al., 2013). Their ecology is closely linked to clean, oxygen-rich rivers, which determines the geography of the disease.

Horse flies (Tabanidae). Large blood-sucking flies. They can act as both mechanical and biological vectors. Horse flies are known as vectors of the causative agents of tularemia, anthrax, and animal trypanosomiases (Gullan & Cranston, 2014; Pedigo, 2002). Their bites are painful, and their ability to fly long distances makes them dangerous vectors on a regional scale.

Fleas (Siphonaptera). Small wingless insects that parasitize warm-blooded animals. Their main role in history was the transmission of plague (Yersinia pestis) from rodents to humans (Gullan & Cranston, 2014; Roberts et al., 2013). Fleas also transmit the causative agents of endemic typhus. Their effectiveness as vectors is linked to feeding characteristics and the ability to survive outside the host’s body.

Lice (Anoplura). Ectoparasites of mammals, including humans. Lice are vectors of the causative agent of epidemic typhus (Rickettsia prowazekii) and relapsing fever (Roberts et al., 2013). Unlike fleas, lice do not leave the host for long, and transmission of the pathogen occurs through close human contact, which makes them an indicator of social conditions.

Triatomine bugs (Reduviidae). Blood-sucking bugs found mainly in Latin America. They are vectors of Trypanosoma cruzi—the causative agent of Chagas disease (American trypanosomiasis) (Roberts et al., 2013). A special feature of transmission is that the pathogen is released with the bug’s feces, and a person becomes infected by scratching the bite site.

Molluscs (Mollusca)

Although molluscs are not arthropods, their role as vectors (or more precisely, intermediate hosts) cannot be overestimated. Freshwater gastropods are an obligatory link in the life cycle of trematodes—parasitic flatworms. For example, for blood flukes (Schistosoma spp.), which cause schistosomiasis, the intermediate hosts are molluscs of the genera Bulinus, Biomphalaria, and Oncomelania (Roberts et al., 2013). Without the mollusc, the trematode larva cannot develop to the stage infective for humans or animals. This is an example of obligate transmission.

Nematodes (Nematoda)

Nematodes are known as parasites of plants, but some of them act as vectors of plant viruses. This is a unique example of how soil organisms become vectors. Nematodes of the genera Xiphinema and Longidorus transmit viruses of the Nepovirus group, while Trichodorus and Paratrichodorus transmit tobraviruses (Draycott, 2006). The virus attaches to the nematode’s cuticle during feeding on roots and is then carried to a healthy plant. Without the vector nematode, these viruses cannot spread in the soil.

Why Do Different Groups of Vectors Transmit Different Types of Pathogens?

This is not accidental but the result of long-term coevolution. Each pathogen is adapted to a specific vector. This specificity is determined by several factors:

1. Vector physiology: The pathogen must be able to penetrate the vector’s body, multiply in it, overcome defense barriers, and reach the salivary glands or other organs from which it can be transmitted further (Gullan & Cranston, 2014).

2. Feeding method: Mosquitoes that feed on blood transmit pathogens circulating in the blood. Aphids that feed on phloem sap transmit plant viruses that are also localized in conductive tissues (Jeger et al., 2023).

3. Ecological connections: The pathogen and the vector must occur in the same habitats. For example, the malaria plasmodium is transmitted only by those mosquitoes that live long enough for the parasite to complete its developmental cycle (Roberts et al., 2013).

Why Is Understanding Vector Systematics Important for Prevention?

Accurate species identification of a vector is of enormous practical importance. Different mosquito species have different ecological preferences: some breed in puddles, others in tree hollows, and still others in artificial containers. Accordingly, the methods of controlling them will differ. For example, to control malaria transmitted by Anopheles mosquitoes, it is necessary to drain swamps and use insecticide-treated bed nets, whereas to control Aedes aegypti, the vector of dengue, one must first of all fight any water containers in populated areas (Gullan & Cranston, 2014). A mistake in identifying the vector species can lead to ineffective and expensive measures. That is why systematics is not an abstract science but the foundation of practical epidemiology.

AliExpress WW

3. Mechanisms of Pathogen Transmission

Now that we have established who can be a vector, it is necessary to understand how transmission occurs. Transmission mechanisms are the key to understanding why some diseases spread explosively and others slowly and locally. At the basis lies the mode of interaction between the pathogen and the vector.

Mechanical Transmission

In mechanical transmission, the pathogen does not reproduce or develop in the vector’s body. It is simply carried on the body surface, limbs, mouthparts, or in the intestine (without penetrating tissues) and reaches a new host upon contact. An example is synanthropic flies, which carry bacteria of intestinal infections (salmonellae, Escherichia coli) on their legs from feces to food (Gullan & Cranston, 2014). In this case, the vector is a “living transport,” and transmission does not require special adaptations of the pathogen to the vector. Often mechanical transmission is only one of several routes of spread, along with contaminated water and food (Roberts et al., 2013).

Biological Transmission

In biological transmission, the pathogen necessarily passes through certain stages of development or reproduction in the vector’s body. Without this vector, the pathogen cannot become infective for the next host. This is a more complex and specific type of relationship that requires long-term coevolution. A classic example is the malaria plasmodium (Plasmodium spp.), which in the body of the Anopheles mosquito undergoes a complex sexual cycle (sporogony) and only after that accumulates in the salivary glands, from where it enters the human blood during a bite (Roberts et al., 2013). Another example is the dengue virus, which reproduces in the intestinal cells of the mosquito Aedes aegypti, then penetrates the hemocoel and reaches the salivary glands (Gullan & Cranston, 2014). In this case, the vector is not merely a carrier but a necessary stage in the parasite’s life cycle.

Transovarial Transmission

Transovarial (vertical) transmission is the transmission of the pathogen from a female vector to her offspring through eggs. This is a very effective way of preserving the pathogen in the vector population, especially if infection of new hosts occurs rarely. For example, the tick-borne encephalitis virus can be transmitted transovarially in ixodid ticks, which allows the virus to persist in natural foci even when the number of hosts is low (Roberts et al., 2013). Similarly, in blackflies Simulium, the filariae Onchocerca volvulus are not transmitted transovarially, but some other filariases are (Gullan & Cranston, 2014). Transovarial transmission makes the vector not only a vector but also a reservoir of the pathogen.

Transstadial Transmission

Transstadial (phase-to-phase) transmission is the preservation of the pathogen in the vector during molting. If the pathogen can persist in the vector’s body during the transition from one developmental stage to another (for example, from larva to adult), such a vector can transmit the infection throughout its life. This is characteristic of ticks: the causative agent of piroplasmosis (Babesia spp.) persists in the tick during molting and is transmitted to the next host (Roberts et al., 2013). Transstadial transmission is often combined with transovarial transmission, as in ticks, which makes them ideal vectors and reservoirs.

Why Is Biological Transmission More Complex but More Effective?

Biological transmission requires complex adaptations from the pathogen: it must be able to penetrate the vector’s body, overcome its immune barriers, reproduce in certain tissues, and reach those organs from which it can be transmitted further (for example, the salivary glands). This makes such systems highly specific: often one pathogen is transmitted by only one or several closely related vector species. However, the effectiveness of biological transmission is much higher. The vector does not simply carry the pathogen; it “accumulates” and “activates” it. For example, millions of viral particles can multiply in a single mosquito, and one bite can be lethal (Gullan & Cranston, 2014). In addition, biological transmission allows the pathogen to persist in nature for a long time, even if the main hosts are temporarily absent.

Why Is Understanding Transmission Mechanisms Important for Prevention?

Knowledge of the transmission mechanism determines the strategy of control. If transmission is mechanical (for example, by flies), it is enough to control flies and observe hygiene. If transmission is biological, it is necessary to break the chain at its most vulnerable link: either destroy the vector, interrupt its contact with the host (for example, use nets or repellents), or affect the pathogen in the vector (which is more difficult). For transovarial transmission, it is important to understand that even destruction of adult vectors does not always lead to the disappearance of the pathogen, since it may persist in eggs. That is why, for example, tick control requires an integrated approach including treatment of pastures and animals (Roberts et al., 2013; Pedigo, 2002). Understanding transmission mechanisms is the basis for predicting outbreaks and developing effective preventive measures.

4. Reservoirs of Pathogens

In the previous section, we discussed vectors—organisms that “transport” the pathogen from one host to another. But where does the pathogen itself come from? Where does it persist during periods between disease outbreaks? The answers to these questions lie in the concept of the reservoir.

Definition of a Reservoir

A reservoir is a species (or group of species) of animals in whose population the pathogen persists indefinitely and from which it can be transmitted to vectors or directly to other susceptible organisms (Roberts et al., 2013). The reservoir ensures the constant existence of the pathogen in nature, even if it is temporarily absent from the population of the main host (for example, humans or agricultural animals). This is the “ecological home” of the parasite, its natural habitat.

It is important to distinguish the reservoir from the main host. The main host is an organism in which the pathogen reaches sexual maturity or passes through key developmental stages. The reservoir, in contrast, is an organism in which the pathogen may not actively reproduce but persists for a long time, maintaining its population. Often these concepts coincide, but not always. For example, for West Nile virus, the main hosts are birds, in which the virus actively reproduces, and the reservoir is also birds, since it is in their population that the virus persists in winter and from which vector mosquitoes become infected (Gullan & Cranston, 2014).

Reservoirs in Wild Animals

Wild animals are the most ancient and natural reservoirs of pathogens. In the course of evolution, parasites and their wild hosts often coexist in a state of relative equilibrium, in which the pathogen does not completely destroy the host population. Examples:

  • Rodents—reservoirs of the causative agents of plague (Yersinia pestis), tularemia (Francisella tularensis), leptospirosis (Leptospira spp.), and many other zoonoses (Basiouni et al., 2025). In rodent populations, these pathogens circulate constantly, and humans and domestic animals become infected only accidentally, through contact with them or their excrement.
  • Primates—reservoirs of yellow fever virus in Africa and South America. In forests, the virus circulates between monkeys and mosquitoes, and outbreaks among humans occur only when humans enter these foci (Roberts et al., 2013).
  • Birds—reservoirs of West Nile virus, St. Louis encephalitis virus, and other arboviruses. Migratory birds are capable of carrying viruses over enormous distances, which explains the rapid spread of these infections (Gullan & Cranston, 2014).
  • Wild ungulates—reservoirs of the causative agents of piroplasmoses (Babesia spp.) and theilerioses (Theileria spp.) transmitted by ticks. For example, African buffalo are asymptomatic carriers of Theileria parva—the causative agent of a disease that is deadly for cattle (Roberts et al., 2013).

Reservoirs in Domestic Animals

Domestic animals often become reservoirs of pathogens dangerous both to themselves and to humans. This is especially important for veterinary medicine and the One Health concept.

  • Cattle—a reservoir of the causative agents of babesiosis, theileriosis, brucellosis, tuberculosis, and many other infections (Roberts et al., 2013).
  • Dogs—reservoirs of the causative agents of leishmaniasis (Leishmania infantum), dirofilariasis (Dirofilaria immitis), ehrlichiosis, and anaplasmosis (Gullan & Cranston, 2014). In the Mediterranean and Latin America, dogs are the main reservoir of visceral leishmaniasis, from which the parasite is transmitted to humans through sandflies.
  • Cats—reservoirs of toxoplasmosis (Toxoplasma gondii), bartonellosis (“cat-scratch disease”), and some other infections.
  • Pigs—reservoirs of Japanese encephalitis virus. In Asia, pigs play a key role in maintaining the circulation of the virus, which is then transmitted to humans by Culex mosquitoes (Gullan & Cranston, 2014).

Human Reservoirs

Humans themselves can be a reservoir of pathogens. This is characteristic of anthroponoses—diseases in which humans are the only or main host.

  • Malaria (for some species of Plasmodium)—in a number of regions, humans are the only significant reservoir, and transmission occurs only from human to human through mosquitoes (Roberts et al., 2013).
  • Epidemic typhus (Rickettsia prowazekii)—humans are the reservoir, and the louse is the vector (Roberts et al., 2013).
  • HIV, hepatitis B and C, measles, poliomyelitis—these pathogens persist predominantly or exclusively in the human population.

Why Do Reservoirs Maintain the Existence of the Pathogen in Nature?

Reservoirs perform several key functions:

1. Long-term preservation: In the reservoir population, the pathogen can persist for years, decades, and even indefinitely. For example, tick-borne encephalitis virus persists in tick and rodent populations in forest areas for centuries (Roberts et al., 2013).

2. Maintenance of genetic diversity: In reservoirs, the pathogen can accumulate mutations and exchange genetic material, which promotes the emergence of new, more dangerous strains.

3. Provision of a source of infection for vectors: Vectors become infected by feeding on the reservoir. Without the reservoir, the vector cannot obtain the pathogen and transmit it further.

Why Is Understanding Reservoirs Important for Disease Control?

Identification of the reservoir is a key stage in developing a strategy to combat a disease. If we know that the reservoir is a certain rodent species, we can:

  • Control the reservoir population (for example, with rodenticides or by changing the habitat).
  • Break the link between the reservoir and the vector (for example, treat animals with insecticides).
  • Vaccinate domestic animal reservoirs (for example, vaccination of dogs against leishmaniasis).
  • Monitor reservoirs to predict outbreaks (Basiouni et al., 2025; Jeger et al., 2023).

For example, plague control is impossible without controlling rodent populations—reservoirs of Yersinia pestis. Yellow fever control in Africa requires taking into account the circulation of the virus among monkeys; otherwise, vaccination of people will not give a full effect (Roberts et al., 2013). Understanding reservoirs is the basis for sustainable control and prevention of infections in the One Health concept, where human, animal, and environmental health are considered as a single whole.

5. Ecological Aspects of Vector Transmission

Until now, we have considered vectors and reservoirs as biological objects possessing certain properties. However, their role in the spread of diseases cannot be understood in isolation from the environment. Pathogen transmission is an ecological process that depends on the interaction of three components—the pathogen, the vector, and the host—and is decisively influenced by abiotic factors: temperature, humidity, seasonality, and climate as a whole. Vectors, being poikilothermic organisms (cold-blooded), are especially sensitive to these factors, which makes their distribution and activity strictly confined to certain conditions (Gullan & Cranston, 2014).

Influence of Temperature

Temperature is one of the most important factors determining the possibility and intensity of vector transmission. It affects all stages of the vector’s life cycle and the development of the pathogen in its body.

First, temperature determines the rate of pathogen development in the vector. A classic example is the malaria plasmodium. Sporogony (the sexual cycle) in the Anopheles mosquito does not occur below 16 °C or above 33 °C. The optimal range is 20–30 °C. That is why malaria does not spread in regions with a cold climate, while in the tropics, where the temperature is consistently high, transmission occurs year-round (Roberts et al., 2013). Similarly, West Nile virus reproduces in mosquitoes faster at high temperatures, which increases the probability of transmission (Gullan & Cranston, 2014).

Second, temperature affects the activity and survival of the vectors themselves. Mosquitoes become active above a certain threshold temperature, and when it gets colder they enter diapause or die. Ticks are active in cool but not cold periods, often in spring and autumn. The number of vector generations per season also depends on temperature: in a warm climate, mosquitoes and aphids produce more generations, which leads to a rapid increase in their numbers (Emden, 2013; Pedigo, 2002).

Influence of Humidity

Humidity is the second critical factor. For many vectors, especially at preimaginal stages, water is absolutely necessary. Mosquitoes lay eggs in water or moist soil, and their larvae develop in water bodies. Blackflies Simulium reproduce only in flowing waters. Therefore, the amount of precipitation and the presence of water bodies directly determine the abundance of these vectors (Gullan & Cranston, 2014).

For ticks and fleas, the humidity of litter and burrows is important. In arid conditions, their eggs and larvae die, so outbreaks of tick-borne infections more often occur in wet years. For example, for the causative agent of sugar beet rhizomania—the BNYVV virus, transmitted by the soil fungus Polymyxa betae—high soil moisture is necessary. Infection begins at a certain moisture level, and waterlogging promotes the spread of the disease (Draycott, 2006). Thus, humidity often acts as a limiting factor for pathogen transmission.

Seasonality

Seasonal changes in temperature and humidity lead to pronounced seasonality of vector transmission. In temperate latitudes, outbreaks of many diseases are confined to the warm season. For example, mosquito abundance and arbovirus transmission activity peak in late summer. Ticks are most active in spring and early summer, which determines the seasonality of Lyme disease and tick-borne encephalitis (Roberts et al., 2013; Gullan & Cranston, 2014).

Seasonality is also associated with diapause—a state of physiological rest into which vectors enter under unfavorable conditions. Diapause allows them to survive winter or the dry season. Many mosquitoes overwinter as eggs or adult females, and ticks as nymphs or adults. Emergence from diapause is synchronized with the onset of favorable conditions, which leads to the synchronous appearance of a large number of vectors and, consequently, to disease outbreaks (Gullan & Cranston, 2014).

In addition, seasonal migrations of reservoir animals (for example, birds) can contribute to the introduction of pathogens into new regions. Migratory birds infected with West Nile virus carry it thousands of kilometers, which explains the rapid spread of this virus across North America after its appearance in 1999 (Gullan & Cranston, 2014).

Climate Change and Expansion of Vector Ranges

Global climate change is having an increasingly noticeable impact on vector transmission. Rising average annual temperatures lead to the expansion of vector ranges into higher latitudes and mountain regions. For example, the mosquito Aedes albopictus, a vector of dengue and chikungunya, formerly found only in the tropics, has spread in recent decades to Europe and North America (Gullan & Cranston, 2014). West Nile virus, having appeared in New York in 1999, spread across the entire territory of the United States and Canada within ten years, facilitated by mild winters and hot summers (Gullan & Cranston, 2014). In Africa, warming is opening opportunities for malaria in highland areas where transmission was previously impossible (Roberts et al., 2013).

Changes in precipitation patterns also play a role: droughts can lead to water accumulation in artificial containers, creating ideal conditions for the breeding of Aedes aegypti mosquitoes. Floods, on the contrary, can increase the abundance of Culex mosquitoes and blackflies. All this makes outbreak prediction more difficult, but at the same time more important (Basiouni et al., 2025; Jeger et al., 2023).

Why Is Understanding Vector Ecology Important for Predicting Outbreaks?

Knowledge of the ecological requirements of vectors makes it possible to build mathematical models and use geographic information systems (GIS) to predict disease outbreaks. For example, knowing the dependence of the rate of malaria plasmodium sporogony on temperature, one can calculate in which regions and in which months the risk of transmission is highest. This allows resources for vector control and vaccination to be allocated purposefully (Roberts et al., 2013).

In addition, the ecological approach underlies the One Health concept, which considers human, animal, and environmental health as a single whole. Climate change affects all components of this system: the abundance and distribution of vectors, the susceptibility of hosts, and the survival of pathogens in the external environment. Therefore, effective prevention is impossible without taking ecological factors into account (Basiouni et al., 2025; FAO One Health, 2019).

6. Evolutionary Aspects of Vector Transmission

In previous sections, we have repeatedly noted that the interaction between pathogen and vector often has a specific and deep character. This is not accidental but the result of coevolution—the process of mutual evolutionary adaptation of species interacting with each other. Understanding the evolutionary aspects of vector transmission allows us to answer key questions: why some pathogens are transmitted only by certain vectors, why vectors often do not suffer from the pathogen, and how new dangerous diseases may appear.

Why Do Vectors and Pathogens Coevolve?

Coevolution of vectors and pathogens is a consequence of their close ecological connection. The pathogen depends on the vector for transmission from one host to another, and the vector, in turn, is for the pathogen a habitat at a certain stage of the life cycle. In such systems, natural selection acts on both partners simultaneously.

For the pathogen, it is advantageous to:

  • Efficiently penetrate the vector’s body.
  • Reproduce in it without killing it too quickly (otherwise the vector will not have time to transmit the pathogen to a new host).
  • Reach those organs from which transmission is possible (for example, the salivary glands of blood-sucking insects).
  • Synchronize its development with the vector’s life cycle.

For the vector, it is advantageous to:

  • Limit the reproduction of the pathogen so as not to die.
  • Avoid too high virulence of the pathogen.
  • Transmit the pathogen while remaining viable itself.

The result of such coevolution is a relatively balanced system in which the pathogen and vector coexist without destroying each other (Roberts et al., 2013). For example, the malaria plasmodium and the Anopheles mosquito have coexisted for millions of years, and although the plasmodium reproduces in the mosquito, it usually does not kill it. Moreover, infected mosquitoes may even feed on blood more often, which increases the probability of pathogen transmission (Gullan & Cranston, 2014).

Why Do Pathogens Often Not Harm the Vector?

This is one of the central questions of evolutionary parasitology. The point is that too high virulence of the pathogen toward the vector reduces its own chances of transmission. If the pathogen kills the vector before it has time to bite a new host, transmission will not occur. Therefore, natural selection favors those pathogen strains that exploit the vector moderately, without causing its rapid death (Roberts et al., 2013).

In addition, vectors often develop tolerance mechanisms to the pathogen. For example, mosquitoes may activate immune reactions that limit the reproduction of the parasite but do not completely destroy it. This allows both the pathogen to persist and the vector to survive (Gullan & Cranston, 2014). In ticks, which feed on blood several times in their lives, pathogens persist for a long time, and ticks often show no signs of disease.

Why Can Vectors Be Resistant to the Pathogen?

Vector resistance to the pathogen is the result of coevolution, during which individuals capable of limiting parasite reproduction without harming themselves are selected. This resistance can be:

  • Innate (genetic): some mosquito populations are genetically immune to certain strains of the malaria plasmodium. This phenomenon is used in genetic control methods (Roberts et al., 2013).
  • Acquired (immune): the vector can activate an immune response that limits the reproduction of the pathogen.
  • Symbiotic: some symbiotic bacteria living in the vector can prevent the reproduction of the pathogen. For example, the bacterium Wolbachia in Aedes aegypti mosquitoes reduces their ability to transmit dengue virus (Gullan & Cranston, 2014).

These mechanisms make the “pathogen–vector” system dynamic: if the pathogen reproduces too strongly, this can lead to selection of resistant vectors, which will reduce transmission. Conversely, if the vector becomes too resistant, the pathogen may select strains that overcome it.

Why Is Understanding Coevolution Important for Predicting the Emergence of New Diseases?

Coevolution is not only the past but also the future. Understanding evolutionary processes allows us to predict which new diseases may appear and how they will spread.

1. Emergence of new strains: Mutations constantly occur in pathogen populations. Some of them may alter specificity to the vector, leading to infection of new vector species and, consequently, to expansion of the disease range. An example is the emergence of new influenza virus strains that can be transmitted from animals to humans.

2. Overcoming resistance: If we use genetically resistant plant varieties or animal breeds, then under selection pressure strains of the pathogen capable of overcoming this resistance may appear. This is well known for plant viruses (Jeger et al., 2023) and for the malaria plasmodium, in which drug-resistant strains appear (Roberts et al., 2013).

3. Expansion of vector ranges: Climate change and human economic activity create new opportunities for contact between pathogens, vectors, and hosts. For example, global warming allows Aedes albopictus mosquitoes to spread in Europe, creating the risk of dengue and chikungunya outbreaks in new regions (Gullan & Cranston, 2014).

4. Pathogen switch to a new host: Sometimes a pathogen can “switch” to a new host if that host turns out to be more accessible or susceptible. This occurs when humans encroach on natural foci (for example, through deforestation) or when domestic animals come into contact with wild ones. The One Health concept is precisely aimed at tracking such switches at early stages (Basiouni et al., 2025; FAO One Health, 2019).

Thus, an evolutionary view of vector transmission is not an abstract theory but a practical tool for predicting and preventing future epidemics and epizootics.

7. Vectors of Animal Disease Pathogens

In previous sections, we laid the theoretical foundation: we examined types of vectors, transmission mechanisms, and ecological and evolutionary aspects. Now let us turn to practice and see how this knowledge is applied in veterinary medicine. Animal diseases transmitted by vectors cause enormous economic damage to livestock farming, reduce productivity, cause mortality, and limit animal breeding in entire regions. Understanding vector biology is the basis for effective prevention and control.

Ixodid Ticks (Piroplasmosis, Babesiosis, Borreliosis)

Ixodid ticks are one of the most significant groups of vectors in veterinary medicine. They transmit the causative agents of a wide range of diseases affecting both domestic and wild animals.

  • Piroplasmosis and babesiosis. The causative agents are protozoa of the genus Babesia. In cattle, Babesia bigemina is especially dangerous, causing “red water” (hemoglobinuria)—a severe disease with high mortality. The vectors are ticks of the genus Boophilus (especially B. annulatus). Infection occurs through a tick bite; the pathogen reproduces in erythrocytes, causing massive death of red blood cells, anemia, and jaundice. In dogs, babesiosis is caused by B. canis, transmitted by Dermacentor and Rhipicephalus ticks (Roberts et al., 2013). Economic damage consists of mortality, reduced milk yield and weight gain, as well as the costs of treatment and acaricides.
  • Borreliosis (Lyme disease). The causative agent is the spirochete Borrelia burgdorferi sensu lato. The main vectors are ticks of the genus Ixodes (I. scapularis in North America, I. ricinus in Europe). The reservoir is rodents (white-footed mice, voles), as well as deer, which are hosts of adult ticks. The disease affects dogs, horses, cattle, and humans, causing arthritis, fever, nervous system and heart damage (Roberts et al., 2013; Gullan & Cranston, 2014). Veterinary doctors must take into account that dogs walking in forest park areas are at high risk.
  • Theileriosis. The causative agent is Theileria parva, and the vector is the tick Rhipicephalus appendiculatus. This is a deadly disease of cattle in East and Southern Africa, known as “East Coast fever.” The disease proceeds with high fever, enlarged lymph nodes, and damage to internal organs. Without treatment, mortality can reach 90–100% (Roberts et al., 2013). Control is based on acaricide treatment of animals and quarantine measures.

Mosquitoes (Dirofilariasis, West Nile Fever)

Mosquitoes are not only a medical problem but also a serious threat to animal health, especially in warm regions.

  • Dirofilariasis. The causative agent is the nematode Dirofilaria immitis, which parasitizes the pulmonary arteries and heart of dogs, cats, and other carnivores. The vectors are mosquitoes of the genera Culex, Aedes, and Anopheles. Larvae (microfilariae) enter the mosquito during blood feeding, develop in it to the infective stage, and are transmitted to the next animal. The disease leads to heart failure and death. Dirofilariasis is distributed worldwide, including southern Europe, the USA, Japan, and Australia (Roberts et al., 2013). Prevention includes regular treatment of dogs with macrocyclic lactones and mosquito control.
  • West Nile fever. A viral disease transmitted by mosquitoes of the genus Culex. The reservoir is birds, while horses and humans are “dead-end” hosts. In horses, the disease manifests as fever, ataxia, paralysis, and can be fatal. Outbreaks have been recorded in Europe, Africa, Asia, and North America. Vaccination of horses is an important preventive measure (Gullan & Cranston, 2014).

Horse Flies (Tularemia, Anthrax)

Horse flies (family Tabanidae) are large blood-sucking flies that can act as both mechanical and biological vectors.

  • Tularemia. The causative agent is the bacterium Francisella tularensis. Horse flies transmit it mechanically: on their mouthparts they carry bacteria from a sick animal (for example, a rodent) to a healthy one. Tularemia is dangerous for sheep, cattle, and humans (Basiouni et al., 2025; Roberts et al., 2013).
  • Anthrax. The causative agent is Bacillus anthracis. Horse flies can mechanically transmit anthrax spores from dead animals or contaminated soil to healthy ones. This is especially relevant in regions with soils unfavorable for anthrax (Basiouni et al., 2025).
  • Trypanosomiases. In the tropics, horse flies of the genera Tabanus and Haematopota transmit the causative agents of Trypanosoma evansi (surra) and T. vivax, causing severe diseases in horses, camels, and cattle (Roberts et al., 2013).

Blackflies (Onchocerciasis)

Blackflies (family Simuliidae) are small blood-sucking insects whose larvae develop in flowing waters. They are vectors of filariae of the genus Onchocerca.

  • Onchocerciasis of cattle. The causative agents are Onchocerca lienalis and O. gutturosa. Simulium blackflies transmit the larvae during a bite. Adult filariae form subcutaneous nodules, and microfilariae cause dermatitis and eye lesions. The disease reduces productivity and can lead to blindness in animals (Roberts et al., 2013).
  • Onchocerciasis of horses. The causative agent is Onchocerca cervicalis. It is transmitted by blackflies, causes skin lesions, and can be a cause of uveitis.

Why Is Understanding Vector Biology Important for Veterinary Medicine?

Knowledge of the biology and ecology of vectors allows veterinary specialists to develop effective control and prevention strategies:

1. Risk prediction. Knowing which tick or mosquito species live in a particular area and which pathogens are associated with them, one can predict the probability of outbreaks and carry out timely preventive treatments.

2. Choice of control methods. Acaricides and pasture treatment are used against ticks; larvicides, drainage of water bodies, and repellents are used to control mosquitoes; insecticides are used to treat watercourses against blackflies. Without knowledge of vector biology, these measures may be ineffective.

3. Vaccination and treatment. For some diseases (for example, West Nile fever in horses) vaccines exist. For others (babesiosis, dirofilariasis), treatment and prevention regimens have been developed that must be applied taking into account the seasonal activity of vectors.

4. Economic efficiency. Investments in vector control often pay off through preserving livestock and productivity. For example, vaccination of cattle against theileriosis in endemic areas of Africa avoids enormous losses (Roberts et al., 2013).

5. One Health. Many animal diseases transmitted by vectors are zoonoses (tularemia, borreliosis, West Nile fever). Vector control in livestock farming reduces the risk of human infection, which corresponds to the One Health concept (Basiouni et al., 2025; FAO One Health, 2019).

Thus, a veterinary doctor armed with knowledge about vectors can not only treat sick animals but also prevent diseases, preserving animal health and the economic well-being of farms.

8. Vectors of Plant Disease Pathogens

Until now, we have considered vectors in the context of medicine and veterinary medicine. However, they play an equally important role in plant protection. Viral, mycoplasmal, and some bacterial plant diseases are unable to independently overcome the distance between plants. For this they need vectors—most often insects, mites, or nematodes that feed on plant sap and transmit the pathogen from a diseased plant to a healthy one. Understanding the biology of these vectors is the basis for developing effective crop protection systems.

Insects—The Main Vectors of Plant Viruses

The overwhelming majority of plant viruses are transmitted by insects with piercing-sucking mouthparts. These insects feed on phloem or parenchyma sap and, in the process of feeding, transmit viral particles. The most significant groups are aphids, leafhoppers, thrips, and whiteflies.

  • Aphids (Aphididae). Aphids are the largest and economically most significant group of plant virus vectors. They transmit more than 275 viruses, including viruses of potato (PVY), cucumber (CMV), beet (BYV, BMYV), tomato (CMV, PVY), and many other crops (Emden, 2013; Mattoo, 2017). Aphids transmit viruses in a nonpersistent (stylet-borne) manner: the virus attaches to the mouthparts and is transmitted during a short probing bite. Infection requires only a few seconds of feeding on a diseased plant and a few seconds on a healthy one. This makes transmission extremely rapid and effective, and control extremely difficult, since insecticides do not manage to kill the aphid before it transmits the virus (Draycott, 2006; Jeger et al., 2023). Aphids can also transmit viruses in a persistent (circulative) manner, in which the virus passes through the insect’s body and persists in it for a long time. An example is beet yellows virus (BYV), transmitted by aphids Myzus persicae and Aphis fabae (Draycott, 2006).
  • Leafhoppers (Cicadellidae). Leafhoppers are vectors of many viruses affecting cereals, vegetables, and industrial crops. They transmit viruses in a persistent manner, often with virus multiplication in the vector’s body. For example, maize dwarf mosaic virus (MDMV) is transmitted by the leafhopper Cicadulina mbila (Emden, 2013). Beet curly top virus (BCTV) is transmitted by the leafhopper Circulifer tenellus—this is one of the most dangerous diseases of beet and tomato in arid regions (Draycott, 2006; Jeger et al., 2023). Leafhoppers also transmit phytoplasmas causing diseases such as tomato stolbur and flower greening (Mattoo, 2017).
  • Thrips (Thysanoptera). Thrips are small insects with piercing-sucking mouthparts that transmit viruses in a persistent manner. The best-known example is tomato spotted wilt virus (TSWV), transmitted by the western flower thrips Frankliniella occidentalis (Mattoo, 2017; Jeger et al., 2023). TSWV affects more than 800 plant species, including tomato, pepper, tobacco, lettuce, and many ornamental crops. Thrips acquire the virus at the larval stage and retain it throughout their lives, transmitting it to their offspring transstadially (Gullan & Cranston, 2014).
  • Whiteflies (Aleyrodidae). Whiteflies are vectors of many viruses, especially in tropical and subtropical regions. They transmit viruses in a persistent (circulative) manner. The most dangerous are whiteflies of the genus Bemisia tabaci—vectors of begomoviruses, including tomato yellow leaf curl virus (TYLCV), bean golden mosaic virus (BGMV), and tomato golden mosaic virus (TGMV) (Mattoo, 2017). TYLCV is one of the most destructive tomato diseases in the world, causing crop losses of up to 100% (Mattoo, 2017; Jeger et al., 2023). Whiteflies also transmit closteroviruses such as tomato infectious chlorosis virus (TICV) and tomato chlorosis virus (ToCV) (Mattoo, 2017).

Nematodes—Soil-Borne Vectors of Plant Viruses

Nematodes are a unique group of vectors that act not in the air but in the soil environment. Free-living soil nematodes of the genera Xiphinema, Longidorus, Paralongidorus, Trichodorus, and Paratrichodorus transmit plant viruses while feeding on roots (Draycott, 2006; Jeger et al., 2023).

  • Nepoviruses. Nematodes of the genera Xiphinema and Longidorus transmit viruses of the Nepovirus group, such as tobacco ringspot virus (TRSV), tomato black ring virus (TBRV), and grapevine fanleaf virus (GFLV). These viruses persist in the nematode from several months to several years, and sometimes for life (Draycott, 2006; Jeger et al., 2023).
  • Tobraviruses. Nematodes of the genera Trichodorus and Paratrichodorus transmit tobraviruses, for example tobacco rattle virus (TRV), which affects potato, tomato, pepper, and many other crops. The virus does not reproduce in the nematode but persists in it for a long time (Draycott, 2006).

Vector nematodes are especially dangerous because they can preserve the virus in the soil for years, even in the absence of host plants. This makes control of viral diseases transmitted by nematodes extremely difficult and requires an integrated approach including crop rotation, soil fumigation, and the use of resistant varieties.

Why Are Plant Vectors a Key Link in the Spread of Viral and Mycoplasmal Diseases?

Plant viruses and phytoplasmas do not have their own means of movement. They cannot overcome even a small distance between two plants without external help. Unlike fungi, which spread by spores through the air, or bacteria, which can be carried by rain and wind, viruses and phytoplasmas are completely dependent on vectors. Without a vector, the infection cannot spread in the field, and the disease remains local. That is why understanding vector biology is the key to understanding the epidemiology of viral plant diseases (Jeger et al., 2023; Draycott, 2006).

Moreover, the specificity of the “virus–vector” relationship means that each viral disease has its own vector (or several closely related species). For example, beet yellows virus (BYV) is transmitted by aphids, while beet curly top virus (BCTV) is transmitted by leafhoppers. This determines differences in the epidemiology of these two diseases and requires different control strategies (Draycott, 2006).

Why Is Understanding Vector Biology Important for Plant Protection?

Knowledge of the biology and ecology of vectors allows agronomists and phytopathologists to develop effective plant protection systems:

1. Outbreak prediction. Knowing the vector’s life cycle and its dependence on weather conditions, one can predict the time of virus appearance in the field. For example, mass flight of aphid vectors of beet yellows virus occurs during certain periods, and treatments are planned taking these dates into account (Draycott, 2006).

2. Choice of control methods. Insecticides are used against aphids, but with nonpersistent transmission they are ineffective. Therefore, other methods are used: early sowing (so that plants become stronger before mass aphid flight), removal of reservoir weeds, use of reflective mulches (to repel aphids), and resistant varieties (Jeger et al., 2023; Mattoo, 2017).

3. Crop rotation and spatial isolation. For nematode vectors of viruses, crop rotation with nonhost crops is effective, as well as spatial isolation of new plantings from old, infected fields (Draycott, 2006).

4. Resistant varieties. The most important direction is the development of varieties resistant to viruses or their vectors. For example, tomato varieties have been developed with the Ty-1 gene, providing resistance to TYLCV, and with the Sw-5 gene—to TSWV (Mattoo, 2017). For beet, varieties with the Rz gene resistant to BNYVV—the causative agent of rhizomania—have been created (Draycott, 2006).

5. Prediction under climate change. Climate warming expands vector ranges and lengthens their activity season. This creates the risk of introducing viruses into new regions. For example, beet yellows virus (BYV) and tomato chlorosis virus (ToCV) are already moving north, which requires revision of plant protection strategies (Jeger et al., 2023; Mattoo, 2017).

6. One Health. Plant health is directly linked to food security and human and animal health. Viral plant diseases reduce yields and product quality, which can lead to malnutrition and economic losses. Vector control in agroecosystems is part of the global One Health strategy (FAO One Health, 2019; Jeger et al., 2023).

Thus, plant disease vectors are not simply “insects on plants” but a key link in the epidemiology of viral and mycoplasmal diseases. Their biology determines where, when, and how a disease will spread, and without understanding it effective management of agroecosystem health is impossible.

9. Vectors of Human Disease Pathogens

In previous sections, we examined vectors of animal and plant diseases. Now let us turn to medicine—an area where the role of vectors is historically most obvious and where they continue to be one of the main threats to human health. According to WHO estimates, vector-borne diseases annually claim more than 700,000 lives and constitute a significant share of infectious morbidity in the tropics and subtropics (Gullan & Cranston, 2014). In this section, we will examine the main groups of vectors associated with diseases and explain why their biology is the key to prevention.

Mosquitoes (Malaria, Dengue Fever)

Mosquitoes are the deadliest group of vectors in human history. They transmit pathogens that are surpassed in scale of impact by only a few other infections.

Malaria. The causative agents are protozoa of the genus Plasmodium. The main species parasitizing humans are P. falciparum, P. vivax, P. malariae, P. ovale, and P. knowlesi (Roberts et al., 2013). The vectors are mosquitoes of the genus Anopheles, with only about 30 species being significant, and the most effective vectors being representatives of the Anopheles gambiae complex in Africa. The female mosquito becomes infected by feeding on the blood of a sick person; the plasmodium undergoes a complex sexual cycle (sporogony) in the mosquito’s body, ending with the accumulation of sporozoites in the salivary glands. During the next bite, sporozoites enter the human blood (Roberts et al., 2013; Gullan & Cranston, 2014). Malaria remains one of the main causes of death in children in sub-Saharan Africa. Understanding mosquito biology—its lifespan, host preferences, and the temperature required for parasite maturation—underlies all control programs, from insecticide-treated nets to genetic methods (Gullan & Cranston, 2014).

Dengue fever. The causative agent is dengue virus (Flavivirus), which has four serotypes. The vectors are Aedes aegypti and Ae. albopictus mosquitoes, which are active during the day and breed in small water containers (Gullan & Cranston, 2014). Dengue is a rapidly spreading disease of the tropics and subtropics; according to estimates, up to 400 million people are infected annually. The absence of a vaccine and the growth of mosquito resistance to insecticides make vector control the only real measure. The effectiveness of Ae. aegypti as a vector is explained by its close association with humans: it lives near dwellings, feeds mainly on people, and lays eggs in any artificial containers (Gullan & Cranston, 2014).

Other mosquito-borne infections. Culex mosquitoes transmit West Nile virus, Japanese encephalitis, and Rift Valley fever; Anopheles mosquitoes transmit filariases (see below). All these diseases demonstrate the importance of an ecological approach: mosquito abundance depends on the presence of water, temperature, and host availability (Roberts et al., 2013).

Ticks (Lyme Disease, Encephalitis)

Ixodid ticks are the second most important group of human vectors after mosquitoes. Their special feature is a long developmental cycle including larva, nymph, and adult, and the ability to preserve the pathogen during molting (transstadial transmission) and transmit it to offspring (transovarial transmission). This makes ticks simultaneously vectors and reservoirs of pathogens (Roberts et al., 2013).

Lyme disease (tick-borne borreliosis). The causative agent is the spirochete Borrelia burgdorferi sensu lato. The vectors are ticks of the genus Ixodes: I. scapularis in North America, I. ricinus in Europe, and I. persulcatus in Asia (Gullan & Cranston, 2014). The reservoir is rodents (white-footed mice, voles), as well as birds. Humans become infected through the bite of an infected nymph or adult tick. The disease manifests as a characteristic migrating erythema, fever, arthralgia, and, in the absence of treatment, heart and nervous system damage. Lyme disease is the most common vector-borne disease in the Northern Hemisphere (Gullan & Cranston, 2014).

Tick-borne encephalitis. The causative agent is tick-borne encephalitis virus (Flavivirus). The vectors are ixodid ticks I. ricinus and I. persulcatus. The reservoir is rodents and other small mammals. The disease affects the central nervous system and can lead to paralysis and death. The virus persists in the tick population transovarially, which allows it to exist even in the absence of large hosts (Roberts et al., 2013). Prevention includes vaccination, protective clothing, and repellents.

Fleas (Plague)

Fleas are small wingless insects that parasitize warm-blooded animals. Their role in human history is enormous: plague pandemics in the Middle Ages claimed tens of millions of lives (Gullan & Cranston, 2014).

Plague. The causative agent is the bacterium Yersinia pestis. The main vector is the flea Xenopsylla cheopis, which parasitizes rats. The reservoir is rodents (black and brown rats, ground squirrels, gerbils, etc.). The flea becomes infected by feeding on the blood of a sick rodent; bacteria multiply in its digestive tract, forming a plug that blocks blood intake. When attempting to feed, the flea regurgitates bacteria into the wound, infecting a new host (Roberts et al., 2013). Humans can become infected both through a flea bite and by airborne droplets from a patient with pneumonic plague. Plague control is impossible without controlling rodent populations and their fleas—this is a classic example of the need for an integrated approach (Basiouni et al., 2025).

Lice (Typhus)

Lice are ectoparasites closely associated with humans throughout their history. They transmit pathogens that become active during periods of social upheaval, wars, and crowding (Gullan & Cranston, 2014).

Epidemic typhus. The causative agent is Rickettsia prowazekii. The vector is the body louse Pediculus humanus humanus (Gullan & Cranston, 2014). Lice live in clothing, feed on human blood, and excrete rickettsiae with feces. Infection occurs when scratching the bite site, when feces are rubbed into the wound. Typhus is accompanied by high fever, rash, and vascular damage; without treatment, mortality can reach 40% (Roberts et al., 2013). Lice also transmit relapsing fever (spirochetes Borrelia recurrentis). Understanding louse biology is important for prevention in refugee camps, prisons, and conflict zones.

Triatomine Bugs (Chagas Disease)

Triatomine bugs (subfamily Triatominae) are blood-sucking insects found in Latin America. They transmit the causative agent of Chagas disease (American trypanosomiasis)—Trypanosoma cruzi (Roberts et al., 2013).

The bugs live in cracks in the walls of adobe houses and feed on the blood of humans and animals. The pathogen is released with the bug’s feces, which it leaves on the skin after feeding. Humans become infected by scratching the bite site and rubbing feces into the wound or mucous membranes. Chagas disease occurs in acute and chronic forms, affecting the heart and digestive system; it remains a serious public health problem in Latin America, and in recent decades cases have also been recorded in North America among migrants (Roberts et al., 2013).

Sandflies (Leishmaniasis)

Sandflies (genus Phlebotomus in the Old World and Lutzomyia in the New World) are small blood-sucking insects, vectors of Leishmania (Leishmania spp.). Leishmaniases affect the skin, mucous membranes, or internal organs (visceral leishmaniasis). The reservoir is rodents, dogs, and foxes. Sandflies become infected by feeding on sick animals and transmit the parasite to humans through a bite (Roberts et al., 2013). Leishmaniases are distributed in the tropics and subtropics; visceral leishmaniasis without treatment is almost always fatal.

Flies (Onchocerciasis, Sleeping Sickness)

Flies are a diverse group including several important vectors.

  • Blackflies Simulium (onchocerciasis). They transmit the filaria Onchocerca volvulus, which causes river blindness. Blackfly larvae develop in fast rivers, so the disease is distributed near watercourses in Africa and Latin America (Roberts et al., 2013).
  • Tsetse fly Glossina (sleeping sickness). The vector of trypanosomes Trypanosoma brucei, which cause African trypanosomiasis (sleeping sickness). The tsetse fly feeds on blood and transmits the parasite during a bite. The disease is endemic to tropical Africa and, without treatment, leads to death (Roberts et al., 2013).

Why Is Understanding Vector Biology Important for Medicine?

Knowledge of vector biology allows us to:

1. Predict risks. For example, model the spread of malaria depending on temperature and precipitation.

2. Develop control methods. Insecticide-treated nets, indoor residual spraying, larvicides, genetic methods (for example, release of sterile males), vaccination.

3. Educate the population. Use repellents, protective clothing, remove standing water.

4. Conduct monitoring. Track vector abundance and infection rates for early warning of outbreaks.

5. Take evolution into account. Understand how pathogens and vectors adapt to control measures (insecticide resistance, behavioral changes).

Why Are Vectors a Key Link in the One Health Concept?

One Health is an approach recognizing the interconnection of human, animal, and environmental health (FAO One Health, 2019). Vectors are at the intersection of all three components:

  • They are part of the environment (ecosystems).
  • They parasitize animals, which serve as reservoirs of pathogens.
  • They transmit these pathogens to humans.

Many vector-borne diseases are zoonoses: plague, tularemia, borreliosis, West Nile fever, leishmaniasis. Vector control requires interdisciplinary cooperation: veterinarians monitor the health of reservoir animals, ecologists monitor the state of the environment, doctors monitor human health, and entomologists study the vectors themselves. Only such an integrated approach allows effective control of vector-borne diseases. An example is malaria control: it includes not only treatment of patients but also drainage of swamps, use of nets, vaccination, and monitoring of mosquito resistance to insecticides (Gullan & Cranston, 2014; FAO One Health, 2019).

Thus, human disease vectors are not simply “insects that bite” but complex biological systems whose study is necessary for preserving the health of millions of people.

10. Methods of Vector Control

We have examined who vectors are, how they transmit pathogens, and which ecological and evolutionary factors determine their role in epidemiology. Now the question naturally arises: how can humanity control vectors to reduce the burden of vector-borne diseases? The history of vector control goes back millennia—from draining swamps in Ancient Rome to modern genetic technologies. However, there is no universal method. Effective control is always based on a deep understanding of the biology of the specific vector and the ecological context. In this section, we will examine the main groups of methods, their possibilities, and limitations.

Ecological Methods: Habitat Management

Ecological methods aim to change the vector’s habitat so that it becomes unsuitable for its reproduction and survival. This is the oldest and often most sustainable approach, since it affects the fundamental ecological needs of the vector.

Drainage and management of water bodies. Mosquitoes, blackflies, and horse flies breed in water. Drainage of swamps, elimination of small water bodies, and regulation of water levels in reservoirs and irrigation systems all reduce vector abundance. A classic example is malaria control in the Panama Canal Zone in the early 20th century, when William Gorgas organized drainage and filling of water bodies, reducing malaria morbidity from 1,263 to 76 hospitalizations per 1,000 people (Roberts et al., 2013). However, drainage can have negative environmental consequences, and its use is limited.

Removal of plant debris and containers. For Aedes aegypti and Ae. albopictus mosquitoes, which breed in artificial containers, removal of old tires, buckets, flower pots, and other objects where water accumulates is critically important. This is the basis of public campaigns against dengue (Gullan & Cranston, 2014). For ticks, maintaining short grass and removing fallen leaves, which serve as shelter for nymphs and adults, is important (Pedigo, 2002).

Crop rotation and spatial isolation. In plant protection, crop rotation with nonhost crops reduces the abundance of nematode vectors of viruses. Spatial isolation of new plantings from old, infected fields reduces the risk of virus introduction (Draycott, 2006). In livestock farming, isolation of susceptible animals from grazing areas where ticks live reduces the risk of piroplasmosis infection (Roberts et al., 2013).

Advantages and limitations. Ecological methods are inexpensive, sustainable, and environmentally safe. However, they require long-term efforts, are often impossible in densely populated regions, and are not always effective at high vector abundance. In addition, climate change can nullify many years of drainage efforts (Jeger et al., 2023).

Biological Methods: Use of Natural Enemies

Biological control is based on the use of the vector’s natural enemies—predators, parasitoids, or pathogens that reduce its abundance without the use of chemicals.

Predators and parasitoids. For mosquito control, fish such as Gambusia affinis are used, which feed on larvae. To control whiteflies and aphids in greenhouses, parasitoid wasps Encarsia formosa and Aphidius colemani are released (Gullan & Cranston, 2014). To control leaf-eating caterpillars, Bacillus thuringiensis is used—a bacterium toxic to butterfly larvae but safe for other organisms (Pedigo, 2002).

Microbial pathogens. Fungi Beauveria bassiana and Metarhizium anisopliae infect and kill a wide range of insects, including mosquitoes, ticks, and whiteflies. Nuclear polyhedrosis virus is used against caterpillars (Gullan & Cranston, 2014). These biopesticides are highly specific and do not accumulate in the environment.

Symbiotic control. The bacterium Wolbachia, living in the cells of many insects, can influence the vector’s ability to transmit the pathogen. For example, infection of Aedes aegypti mosquitoes with certain strains of Wolbachia reduces their ability to transmit dengue virus and also shortens mosquito lifespan (Gullan & Cranston, 2014; Jeger et al., 2023). This approach is already undergoing field trials in several countries.

Advantages and limitations. Biological methods are environmentally safe, specific, and can provide long-term control. However, their effectiveness depends on ecological conditions, they require time for implementation, and they can be expensive. In addition, introduction of alien species can have unpredictable consequences for ecosystems (Gullan & Cranston, 2014).

Chemical Methods: Insecticides and Acaricides

Chemical methods are the most widely used and fast-acting. They include the use of insecticides against insects, acaricides against ticks, larvicides against larvae, and rodenticides against reservoir rodents.

Main groups. Organophosphates, carbamates, pyrethroids, and neonicotinoids all act on the nervous system of insects. Residual insecticides are used for indoor treatment (for example, DDT in the past, now pyrethroids). Acaricides in the form of dips or sprays are used to treat livestock against ticks (Roberts et al., 2013; Pedigo, 2002).

The problem of resistance. Mass use of insecticides leads to selection of resistant individuals. Resistance to DDT in mosquitoes was noted as early as the 1950s, and since then it has spread to all classes of insecticides (Gullan & Cranston, 2014). Aphids and whiteflies also rapidly develop resistance to pesticides, making chemical control increasingly unreliable (Emden, 2013; Mattoo, 2017).

Environmental consequences. Broad-spectrum insecticides kill not only vectors but also beneficial insects (pollinators, natural enemies). They can accumulate in food chains (biomagnification) and contaminate water and soil. An example is DDT, which caused thinning of eggshells in birds of prey and was banned in many countries (Gullan & Cranston, 2014; Pedigo, 2002).

Advantages and limitations. Chemical methods are fast, cheap, and effective when applied correctly. However, they require constant updating of active substances, damage the environment, and do not solve the problem in the long term. Their use must be justified and targeted.

Genetic Methods: Insect Sterilization

Genetic methods aim to reduce the reproductive potential of the vector population. They include the release of sterile males, genetic modification, and methods based on CRISPR.

Sterile males. The classic method is mass rearing of males, their sterilization by radiation or chemical mutagens, and release into nature. Sterile males compete with wild males for mating but produce no offspring. This method was successfully used to control the New World screwworm Cochliomyia hominivorax in the USA and Mexico (Roberts et al., 2013). The method is also being developed for mosquitoes but requires large expenditures.

Genetic modification. Introduction of lethal genes that kill offspring before they reach sexual maturity. For example, release of transgenic Aedes aegypti mosquitoes with a dominant lethal gene that prevents larvae from surviving without the antibiotic tetracycline. In the absence of tetracycline in nature, the offspring die (Gullan & Cranston, 2014). This method has passed field trials in Brazil and the Cayman Islands.

Gene drive and CRISPR. CRISPR/Cas9 technology allows changes to be made in the vector genome that spread through the population at high speed. For example, one can insert a gene that blocks the development of the malaria plasmodium in the mosquito, or a gene causing female sterility. These methods are at the stage of laboratory research but open revolutionary possibilities (Jeger et al., 2023; Mattoo, 2017).

Advantages and limitations. Genetic methods are species-specific, do not pollute the environment, and can provide long-term control. However, they require high technology, are expensive, and their environmental consequences are insufficiently studied. Ethical issues also provoke discussion.

Why Is an Integrated Approach More Effective?

No single method is a panacea. Chemical methods give a rapid effect but cause resistance and pollution. Ecological methods are sustainable but slow and not always applicable. Biological methods are safe but depend on conditions. Genetic methods are promising but complex and expensive. Therefore, the modern strategy—Integrated Vector Management (IVM)—involves combining all available methods taking into account the specific ecological and epidemiological situation (FAO One Health, 2019; Gullan & Cranston, 2014).

For example, to control malaria in Africa, the following are used simultaneously:

  • Insecticide-treated nets (chemical method).
  • Indoor residual spraying (chemical method).
  • Drainage of temporary water bodies (ecological method).
  • Introduction of Gambusia fish (biological method).
  • Vaccination and treatment of patients (medical method).

To control dengue in cities:

  • Removal of artificial water containers (ecological method).
  • Use of larvicides (chemical method).
  • Release of Wolbachia-infected mosquitoes (biological/genetic method).

Why Is Understanding Vector Biology the Basis of Control?

All control methods work only when they take vector biology into account. Draining swamps is useless if the mosquito breeds in tree hollows. Insecticide-treated nets are effective only against mosquitoes active at night. Release of sterile males will not work if the males are not competitive. Genetic methods require precise knowledge of the genome and behavior. Therefore, entomological research—species identification, study of the life cycle, behavior, and ecological preferences—is the foundation for developing any control strategy (Gullan & Cranston, 2014; Pedigo, 2002; Roberts et al., 2013).

11. Vectors and Reservoirs in the Agrosphere

We have reached the final section, which links all previous theoretical and practical aspects with the main goal of our course—training an agricultural specialist. The agrosphere is not only fields, farms, and greenhouses. It is a complex ecological system where humans, cultivated plants, domestic animals, wildlife, and countless microorganisms are in constant interaction. In this interaction, vectors and reservoirs play the role of invisible but powerful intermediaries determining plant health, animal productivity, and, ultimately, the economic well-being of the farm and food security. Understanding their role is not abstract knowledge but a direct tool for the agronomist, veterinarian, and ecologist.

(a) Vectors of Agricultural Animal Diseases Reduce Productivity

In livestock farming, vectors of disease pathogens cause colossal economic damage. This damage consists not only of animal mortality but also of reduced milk yield, weight gain, wool quality, and reproductive function. Sick animals require costs for treatment and veterinary care and can also be a source of infection for the entire herd.

Ixodid ticks transmit the causative agents of piroplasmosis (Babesia spp.) and theileriosis (Theileria spp.). Cattle infected with Babesia bigemina suffer from severe anemia and hemoglobinuria; without treatment, mortality reaches 50–90% (Roberts et al., 2013). Theileriosis, caused by Theileria parva, in Africa kills up to 90–100% of infected animals, which makes cattle breeding in endemic areas practically impossible without expensive veterinary measures (Roberts et al., 2013). Even subclinical infections reduce milk yield and weight gain, and therefore the profitability of the farm.

Mosquitoes transmit dirofilariasis (Dirofilaria immitis)—a nematodosis affecting the heart and pulmonary arteries of dogs, cats, and other carnivores. The disease leads to heart failure, reduced working capacity, and death of animals. Treatment is expensive, and prevention requires regular treatment of animals (Roberts et al., 2013; Gullan & Cranston, 2014). Horse flies and blackflies also contribute by transmitting the causative agents of tularemia, anthrax, and onchocerciasis, which weaken animals, reduce their productivity, and can lead to mortality (Basiouni et al., 2025; Roberts et al., 2013).

(b) Vectors of Plant Diseases Reduce Yield

In crop production, vectors of viral and mycoplasmal diseases pose no less a threat. Plant viruses are unable to spread independently over significant distances, and without vectors the infection remains local. It is vectors that turn a local outbreak into an epidemic covering entire regions.

Aphids are the main vectors of viruses affecting sugar beet, potato, tomato, cucumber, and many other crops. Beet yellows virus (BYV), transmitted by aphids Myzus persicae and Aphis fabae, causes yellowing of leaves, reduced sugar content of roots, and yield losses of up to 30–50% (Draycott, 2006). In tomato production, cucumber mosaic virus (CMV) and potato virus Y (PVY) annually cause damage estimated in millions of dollars (Mattoo, 2017).

Whiteflies (Bemisia tabaci) transmit tomato yellow leaf curl virus (TYLCV)—one of the most destructive tomato diseases in the world. Crop losses can reach 100% if plants are infected at early stages (Mattoo, 2017). Thrips transmit tomato spotted wilt virus (TSWV), which affects more than 800 plant species, including pepper, tobacco, lettuce, and ornamental crops (Jeger et al., 2023). Nematodes of the genera Xiphinema and Longidorus transmit nepoviruses, such as tobacco ringspot virus (TRSV) and tomato black ring virus (TBRV), which persist in the soil for years and make fields unsuitable for growing susceptible crops (Draycott, 2006).

Economic losses from viral plant diseases include not only reduced yield but also costs for pesticides, loss of product quality, and sometimes complete death of plantings. In developing countries, where protective means are limited, these losses can lead to hunger and social instability.

(c) Vectors of Zoonoses Threaten Human Health

Many diseases transmitted by vectors are zoonoses—infections that circulate among animals but can be transmitted to humans. In the agrosphere, humans are in constant contact with animals, soil, plants, and wildlife, which creates many opportunities for infection.

Rodents are the most important reservoirs of the causative agents of plague, tularemia, leptospirosis, and hemorrhagic fever with renal syndrome (Basiouni et al., 2025). In rural areas, where granaries, haylofts, and residential buildings attract rodents, the risk of infection is especially high. Ticks transmit to humans the causative agents of Lyme disease, tick-borne encephalitis, and ehrlichiosis; agricultural workers, foresters, and shepherds are at greatest risk (Gullan & Cranston, 2014; Roberts et al., 2013). Mosquitoes transmit West Nile virus, Japanese encephalitis, and Rift Valley fever, which can cause severe nervous system damage (Gullan & Cranston, 2014). Horse flies and blackflies can also transmit zoonotic infections.

All this means that vector control in livestock farming and crop production is not only an economic but also a medical task. Measures aimed at protecting animals and plants simultaneously reduce the risk of human infection. This is precisely the essence of the One Health concept.

(d) Understanding Vector Ecology Is the Basis of Prevention

For an agronomist, veterinarian, and ecologist, knowledge of the biology and ecology of vectors is not an elective but a professional necessity. Only by understanding where and how the vector reproduces, how it spreads, and which conditions promote its activity can one develop an effective and sustainable protection system.

Knowledge of the life cycle allows choosing the right target for intervention. If the vector overwinters as an egg, control should be aimed at destroying eggs. If it breeds in standing water, water bodies must be drained. If it feeds on wild reservoirs, these reservoirs must be controlled (Roberts et al., 2013).

Knowledge of ecological preferences helps predict outbreaks. For example, mass reproduction of aphid vectors of plant viruses occurs in warm dry weather; mosquito abundance increases after rains; tick activity is confined to spring and autumn (Emden, 2013; Draycott, 2006). This knowledge allows preventive treatments to be carried out in a timely manner rather than after the fact.

Integrated management is a combination of ecological, biological, chemical, and genetic methods adapted to a specific situation. In the agrosphere, this may include:

  • Crop rotation and spatial isolation of crops.
  • Use of resistant plant varieties and animal breeds.
  • Biological control (release of natural enemies).
  • Reasonable use of insecticides and acaricides (only when the economic threshold of harmfulness is exceeded).
  • Monitoring of vector abundance using traps and pheromones.
  • Training of personnel and observance of sanitary norms.

Connection with One Health. The agrosphere is the place where human, animal, and ecosystem health intersect. Vectors and reservoirs are at the center of this intersection. Their control requires an interdisciplinary approach combining the efforts of agronomists, veterinarians, physicians, ecologists, and entomologists. That is why in modern programs for combating vector-borne diseases, increasing attention is paid to ecological and social factors, and not only to chemical treatments (FAO One Health, 2019; Basiouni et al., 2025).

Conclusion

Vectors and reservoirs are an integral part of the agrosphere. They affect livestock productivity, crop yields, and the health of people working on the land. Their role cannot be overestimated, and ignoring it leads to economic losses, disease outbreaks, and deterioration of food security. For a future agricultural specialist, knowledge of the biology, ecology, and evolution of vectors is not merely a theoretical baggage but a practical tool allowing informed decisions, protecting crops, preserving livestock, and safeguarding human health. Ultimately, it is this interdisciplinary view, combining zoology, ecology, medicine, and agriculture, that underlies the sustainable development and well-being of our common home—the planet Earth.

References

  1. Agrios, G.N. (2005). ‘Introduction’, in Plant Pathology. London, UK: ACADEMIC PRESS, pp. 4-76.
  2. Agrios, G.N. (2005). ‘Plant Diseases Caused by Viruses’, in Plant Pathology. London, UK: ACADEMIC PRESS, pp. 723-825.
  3. Albajes, Ramon, Madeira, Filipe (2019). ‘Integrated Pest Management’, in Crop Science. New York, NY: Springer New York, 309-344. doi: 10.1007/978-1-4939-8621-7_164
  4. Basiouni, Shereen, Rodriguez-Morales, A.J., Shehata, A.A., Duarte, P.Magalhães (2025). ‘Silent Carriers: The Role of Rodents in the Emergence of Zoonotic Bacterial Threats’, Pathogens, 14(9), 928. doi: 10.3390/pathogens14090928 (PubMed)
  5. Begon, Michael, Howarth, R.W., Townsend, C.R. (2014). ‘The ecology of human population growth, disease, and food supply’, in Essentials of Ecology. Hoboken, NJ: John Wiley & Sons, pp. 406-440.
  6. Blancard, Dominique (2012). Tomato Diseases: Identification, Biology and Control. 2nd ed. London, UK / Waltham, MA, USA / San Diego, CA, USA: Academic Press (an imprint of Elsevier).
  7. Czosnek, H., Koren, A., Vidavski, F. (2017). ‘Insect-transmitted viral diseases infecting tomato crops’, in Mattoo, A.K., Handa, A.K. (ed.) Achieving sustainable cultivation of tomatoes. Cambridge, UK: Burleigh Dodds Science Publishing, ch. 13.
  8. FAO/OIE/WHO (2019). ‘Taking a multisectoral, One Health approach to specific technical activities’, in One Health: A Tripartite Guide to Addressing Zoonotic Diseases. : , pp. 41-92.
  9. Ghersa, C.M., Martínez-Ghersa, M.Alejandra (2019). ‘Agroecological Basis for Managing Biotic Constraints’, in Crop Science. New York, NY: Springer New York, 289-308. doi: 10.1007/978-1-4939-8621-7_196
  10. Gullan, P.J., Cranston, P.S. (2014). ‘Medical and veterinary entomology’, in The Insects. An Outline of Entomology. West Sussex, UK: John Wiley & Sons, pp. 397-417.
  11. Hickling, G.J. (2011). ‘Pathogens, Animal’, in Simberloff, Daniel, Rejmánek, Marcel (ed.) Encyclopedia of Biological Invasions. Berkeley and Los Angeles, California: University of California Press, pp. 510-514.
  12. Jeger, M.J., Fereres, Alberto, Malmstrom, C.E., Mauck, K.E., Wintermantel, W.M. (2023). ‘Epidemiology and Management of Plant Viruses Under a Changing Climate’, Phytopathology®, 113(9), 1620-1621. doi: 10.1094/PHYTO-07-23-0262-V (PubMed)
  13. Pedigo, L.P. (2002). ‘Introduction’, in Entomology and Pest Management. New Jersey: Prentice Hall, pp. 1-34.
  14. Roberts, L.S., Janovy, J. Jr., Nadler, Steve (2013). ‘Basic Principles and Concepts I: Parasite Systematics, Ecology, and Evolution’, in Foundations of Parasitology. New York, NY: McGraw-Hill, pp. 9-22.
  15. Roberts, L.S., Janovy, J. Jr., Nadler, Steve (2013). ‘Parasitic Arachnids: Subclass Acari, Ticks and Mites’, in Foundations of Parasitology. New York, NY: McGraw-Hill, pp. 611-630.
  16. Roberts, L.S., Janovy, J. Jr., Nadler, Steve (2013). ‘Parasitic Insects: Diptera, Flies’, in Foundations of Parasitology. New York, NY: McGraw-Hill, pp. 575-598.
  17. Roberts, L.S., Janovy, J. Jr., Nadler, Steve (2013). ‘Parasitic Insects: Phthiraptera, Chewing and Sucking Lice’, in Foundations of Parasitology. New York, NY: McGraw-Hill, pp. 543-554.
  18. Roberts, L.S., Janovy, J. Jr., Nadler, Steve (2013). ‘Phylum Apicomplexa: Malaria Organisms and Piroplasms’, in Foundations of Parasitology. New York, NY: McGraw-Hill, pp. 143-166.
  19. Roberts, L.S., Janovy, J. Jr., Nadler, Steve (2013). ‘Phylum Arthropoda: Form, Function, and Classification’, in Foundations of Parasitology. New York, NY: McGraw-Hill, pp. 489-512.
  20. Stevens, Mark, Liu, H., Lemaire, Olivier (2006). ‘Virus Diseases’, in . : , pp. . doi: 10.1002/9780470751114.ch11
  21. vanEmden, H.F. (2013). ‘Subclass Pterygota, Division Exopterygota, Hemipteroid Orders’, in Handbook of Agricultural. Entomology. West Sussex, UK: Wiley-Blackwell, pp. 63-111.